John Deere Mower Deck Removal: the EASY way!
Vložit
- čas přidán 14. 04. 2023
- John Deere Mower Deck Removal doesn't have to be hard or take a lot of time. I have an X540 but X500s and X300s should be nearly identical, and most John Deere decks are similar. I run through the process and offer some tips and tricks to get the job done fast. It's easier than you think and I'll show you exactly what I do to remove mine. I have a whole playlist of John Deere maintenance videos so check out the links if you want to see more!
🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜
🎥👀 🎥👀 Watch next🎥👀 🎥👀
Resolving a “cranks but doesn’t start issue”
• John Deere no start is...
Controversial deck leveling video, people didn’t like my method and weren’t afraid to tell me about it in the comments.
• John Deere deck leveli...
How to remove a wheel off your mower
• How to remove a wheel ...
Coolant change on liquid cooled engines • John Deere X540 coolan...
Changing transaxle oil and filter
• John Deere maintenance...
How to change the oil
• John Deere oil change DIY
John Deere Lawn Tractor Riding Mower Playlist
• I like green tractors,...
🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜🚜
Attachments and accessories are the best part of owning a lawn tractor. Here’s some of my favorites:
Fall leaf cleanup using a lawn sweeper
• Fall leaf cleanup usin...
John Deere sprayer attachment for riding mowers: this thing rocks!
• John Deere sprayer att...
Fall leaf cleanup using a bagger
• Fall leaf cleanup usin...
Best garden cart: Gorilla cart! Use the tip at the end to get one for half price.
• Best garden cart: Gori...
⭐️⭐️⭐️My Top 10 ESSENTIAL Lawn Care Products for Every Home Owner⭐️⭐️⭐️
🔴The Anderson’s Barricade Pre Emergent geni.us/Jg5MNq4 (Amazon)
🔴Ortho Weed B Gone geni.us/hDrcNSS (Amazon)
🔴Jonathan Green Black Beauty Ultra Grass Seed geni.us/Fj38BI (Amazon)
🔴My Soil Test Kit (2 Pack bundle w/ probe) geni.us/BxqhpG (Amazon)
🔴Scott’s Starter Fertilizer w/ Mesotrione geni.us/ty1xOT (Amazon)
🔴Orbit Sprinkler Timer (3 port) geni.us/grfcf0A (Amazon)
🔴Jonathan Green Soil Amendment geni.us/1BZZz7 (Amazon)
🔴Talak Insecticide (Bifenthrin) geni.us/Mm5Efp7 (Amazon)
🔴Simple Lawn Solutions Soil Loosener (Liquid aeration) geni.us/6WODn5s (Amazon)
🔴The Anderson’s Weed and Feed geni.us/IW1MLx (Amazon)
As an Amazon Associate, I earn from qualifying purchases.
If you like fast and easy, check out my deck leveling video for a method I bet you haven’t seen before.
czcams.com/video/gLLOAofJhVQ/video.html
I use a fifth wheel pin rod to pull the rear pins. Can do it with being on my knees. Have to do it on your knees to put it back on. Thing I like is only have to get down to the pin level once.
This is why CZcams exists. I had to replace the belts on my x500 and this video walked me through deck removal. Thanks a million!
You are the “why” behind my channels existence. I’m hoping to create a resource that lasts for years and continues to help people long after the video is first published. THANK YOU for watching!
This is great and without to much talking. Simple and short yet long enough to understand whole thing .Thank you . All the best
Thanks Milos, good luck! 👍
I wish I watched this one first … simplified the process. THANK YOU!
I just purchased my first tractor ever. A GT225. I need to put mulching blades on so will absolutely try your method. That makes alot more sense than having to jack the mower up etc!
I have an X360. with 48" mower. The only way yo get the mowere on an off is to turn the front wheel all the way one direction. That makes the opening under the tracker a couple of inches wider. Even then I have to go in/out at an angle to get around the wheels. The wheel base on the X360 is a little smaller.
Nate.
Good tip for the X300 people in here, thanks for sharing. It can be a tight fit and any extra space you can get is super helpful.
I 'hopefully' have a 2019 X-580 being delivered next week. Traded off my Simplicity Broadmoor. Watching and learning from great videos like this, well done Sir!
Thanks! That front U bracket is what my Scotts L2048 needs. I didn't even know what it looked like since I have not been able to find a good exploded parts diagram.
Great Video - Thanks!
Thanks dude, appreciate this video. You just saved me a lot of frustration lol
Oh it can still be frustrating, but hopefully you get it handled. Thanks for watching!
Thanks again for the info and great video.
Thanks for watching! Are you a horse racing fan? I used to live in Louisville Kentucky and the derby was HUGE there. Derby parties, we’d watch it on TV every year, big freaking deal. In Minnesota, not so much.
Thanks for the help!
Good stuff !! One minor tip I'd like to share is that if you remove the front loop (front deck support) right after removing the primary deck belt, it will make unhooking those rear lift arms a bit easier ! Give it a try 🙂👨🔧
I actually just put my deck back on yesterday and did the arms first, followed by the loop. You are correct that taking the pressure off of the arms seems to make that part easier. Good tip!
Thanks mate.
Hydraulic! OF COURSE the engine needs to be on for it to work. Man, thanks for your help - I thought I broke something...
Love these quick, easy to reference videos. I also have an X540, so your videos are always spot on! Thanks from a fellow Minnesotan 👍 PS I'm looking at adding a sleeve hitch to mine and it looks like you already have one. Would love to see a video on the install/functionality!
Edit... Maybe that's just an attachment on yours for the tank sprayer?
Hey Jordan. That’s actually the bracket for my power flow bagger attachment. It just helps hold the bag collection system on the back. Where in Minnesota? I thought lawn season was going to be underway after last Thursday and Friday. Haha, wrong!!!
@@suburbanacreage ha no kidding! I thought I was going to have to break out the blower again. I'm down in Inver Grove, also on a suburban acreage! Anyway, hit me up if you want to do a collab video on a sleeve hitch... I'll probably be picking one up soon!
@@jhillmotorsports I’m actually looking into sleeve hitches right now. Shoot me an email suburbanacreage@gmail.com I’m curious to know what you are thinking about getting.
@@suburbanacreage sounds good, will do!
Was losing my patience on my mower at the part you said was the worst part earlier today. Thank you for your video. I’m going to crush it out tomorrow. God bless you!
It can be easier to disconnect the arms if you disconnect the front loop hanger first. Either way, it’s not terribly easy to do. Jostling, rocking, bouncing, etc, do what you have to do to ease up the tension on what you’re trying to disconnect. Come back tomorrow and let me know how it went, you got this.
It went well I took off the cotter pins since I was on uneven ground and couldn’t slip the deck out. Thanks again!
thanks. I see what I missed
Bad chad
How do I get the deck back on? JD is a crazy machine in everything, belts to deck nutz. Now I can't get the darn deck back on. It's like the deck is trying to push through the front tires, it's crazy again. Help...
This was an excellent video. Perfectly explained and demonstrated visually. Thank you. When I reconnected the deck, it doesn't seem properly aligned like before. When I lift it, there is something odd in the front. Maybe I need to realign and level the deck. Should it change that much after removing the deck? Any feedback is appreciated.
In theory it shouldn’t change, but I always check it and usually end up making adjustments. After you get the deck back on, I might take a lap around the yard to make sure everything has bounced and settled into the right position, maybe run the deck up and down a few times, that kinda thing. Then check it and make your adjustments. I have a video for a quick method to check and level your deck if you’re interested:
czcams.com/video/gLLOAofJhVQ/video.html
@@suburbanacreage It is attached, and that's why I am a bit concerned. I think the front isn't perfectly in position although it is in place. Hard to explain, but it is clear as soon as I raise the deck. It isn't one smooth lifting process.
@suburbanacreage This is not such a difficult process which is why I am surprised.
You saved me.
No, you used the resources available (CZcams University) to save yourself! Glad you liked the content.
Please make the same vid but for putting it on
But that’s the hard part!
You forgot a step!! at time 1:45 you should have mentioned to pull the deck raise lower peddle to not only to the lowest release position, but push it further toward the rear of the tractor and lock it down. This error cost me several hours of frustration. FYI Everybody.
Sorry about that and thanks for the great tip! I like Popcorn too!
I. Have. A. 145A. John. Deere. Deck. Belt. Replace
Is a 54” deck on a X380 different?
I’m notseeing the tension rod.
Should be very similar if not exactly the same.
It is similar. I bought this X380 w/54” deck new in Aug.’22. I do not see a tensioner rod (should have taken a picture) but I took the pressure off the front pulley to remove belt and did everything you said. I HAD to remove the front loop completely.
The reason I was removing the deck: I sucked in a length of 3/8” steel cable which wrapped around two blades.
Cable removed. All reassembled. A few NH raindrops! Hopefully I’ll roadtest: get a “GO” and can finish mowing if the grass stays dry.
Thank you for your guidance.
Good problem solving skills Fred, glad it didn’t wreck your spindles. Hopefully you got it shut down quick enough after sucking up the cable.
On the 380 (non power deck) there is a “bolt” that must be turned with a socket wrench. While rotating it and holding it in the turned position the tension is taken off and the belt can be slipped off of the drive spindle.
Thanks for the additional info
Great informative video. On the joke side.. which side is the driver side...lol
Funny you mention that because with my bagger in place I always get on and off from the left, like a car. But I realized what I said when I was editing and that it didn’t really make sense. Decided to leave it in anyway. Good catch!
Lol