Thank You!!!! This helped saved me tons of money from a local vendor trying to change me $1700 to replace it, when it only required to be taken off and clean off the built up dirt and gunk that was built up over the years. Thank You!
I have watched all of your videos on the 100 series John Deere tractor and you have been very helpful. I have now learned how to remove my deck, Grease all parts needed, sharpen my blades and maintain my mower at a much lower cost by doing it all myself. Thank You So Much!
Love the gentle easy to follow pace for newbies like me to digest easily. Great video clarity, even in the very dark sections so it is plain what is happening and needs to be done. MANY THANKS
Just got my first John Deere and wanted to perform a little maintenance, painting, and seat change, and this page was easy to follow, had it off and back on in minutes. Thanks!
Thanks Jim, just finished replacing both blade spindles on my E130's cutting deck. I watched your videos to familiarize myself with the procedure and it went without a hitch, thanks to you!
Just found your channel as I’ve recently purchased a John Deere lawn tractor in the UK. (X135R). Your videos have been really helpful as I like to do all my own servicing. The way you explain the process is great. Many thanks! All the best from across the pond.
I have had my D110 for 6 years and never serviced it myself (just a couple of times at the dealer). This spring I knew I was on the hook 'cause the blades are completely dull, this video is a great resource. Thank you for making it!
You are the best so far. Many posts are done with good intent, BUT YOU ARE MORE CLEAR AND VERY VERY INFORMATIVE. Video is clean. THANKS FROM A Vietnam Veteran.
One of my blades got stuck in a tree root and I didn’t know what to do. Lucky my mower is the same as your’s . Without your video i would’ve had to but a new mower. THANK YOU!!!!!!!!
Neighbor gave us one of these last year. Runs good after charging battery and fixing tires with green slime. Figured its overdue for blade sharpening. Thanks for the deck removal demonstration. Always easier with a short video before diving into it for the first time.. Saw the 5 pins that support the deck. Belt looked spring loaded. Didnt notice the cable before this video. Thanks.
I would like to Thank you for these John Deere videos! My father passed away almost 4 years ago and I have been using his D110. Since it was his, I really didn't know much about it and I've been using it to cut the grass but I have been neglecting the maintenance on it (aside from oil changes). Your videos have really inspired me to really "get into" the machine and make sure to keep it maintained so as to keep it running as long as possible. I cannot repay you for the knowledge that you have passed on but know that I am truly grateful!
That is a great video! I searched for instructions on how to remove the deck on my John Deere 125, and found you. Very clear, concise, and to the point. I will be returning often to learn more about keeping my JD up to snuff! Keep up the good work, my friend.
One of the best DIY videos I've watched. I will be taking out my deck and getting my blades sharp for the weeks of cutting ahead this spring and summer. Nice work and thank you.
Another great instructional video Jim. I have had my LA105 over her in Australia for about a year (secondhand) and was having all sorts of issues, but after discovering your channel it has never run better or cut better. Thanks for all your efforts.
So glad I could help. How is everything going in Australia? Is everything true what I am hearing you can not barley leave your house? Or is that only one place in Australia? I have prayed for your country. Hope your safe my friend
@@DIYJIM Thanks for your thoughts Jim. I'm in Queensland and we are doing well here. Unlike the southern states where Delta is running rampant. I'm glad I'm not in uniform either these days (24years Air Force) as there is too much on their plates. Really enjoy your videos and have helped me a lot.
@@Raafman42 I work in a prison I really don’t think Delta is as bad as the media is making it out to be. This is coming from nurses and doctors that I know. God bless
Thank you so so much for this video! You simplified it enough that I can do it myself (I hope!). Being female, it’s always a good feeling to be able to do it yourself 😊. Your videos have helped me a lot!
This was very good instruction with good camera work also. I have just purchased an S130 and didn't have a clue how to remove the deck. Now I do, Thanks!
Wow! By far the best YT video on working on everything JD 100 series! All others go through too fast to absorb the info or are too “commercially” and hard to follow. Deff subbing for more great content👊
Watched some other videos as your video wouldn't load for some reason. They were helpful and had good descriptions, but my mower is exactly like the one you are working on in the video and I'm sure an earlier model. The springs went flying when removing the big spring and one I didn't how to put back on and now I do so thank you very much. The other dark one on the brake is ???? Your descriptions are very clear, not too fast if you are new at this, and the video is clear and precise. Excellent job!
Excellent video, @ 68 I was able to remove my mower deck by myself and of course your video....it did take me (female) twice as long. Again, Thank-you, Buzz.
Good for you boss man! Hope your channel is monetized and making some money for you. DIY and Handyman work will definitely be the highest paying work soon. I truly believe that. Most people can't wipe their own Ace without proper instruction. Thinking about starting my own channel but idk how it all works. Keep at it! God bless
Maybe I should make a video on how to start a DIY CZcams channel thanks for the nice comment it’s a lot of work. I am monetized now it took me about a year before I got my 1000 subscribers
I got the deck to my E130 back on and had a pin left. I decided to go to CZcams and get some help. It was the first one you took off, I forgot about that one. I'm 70 and have a difficult time reaching under the machine. I attached the blade engagement spring before I got the deck all the way under the tractor. That way I could see how it went and get some leverage on it.
Appreciate the video very easy to follow and understand! I have an E180 so 52 inch deck, only thing I’d add is I needed to take off the front deck wheel in order to get it out.
I have the D130, I removed the 2 plastic pully guard covers, so much easier to keep clean. Thanks again for all you helpful ideas and videos. Masonry Plus Fernandina Beach, Florida President Trump America's Shield.
Aloha Jim, Perfect👍 Very clear, very thorough, Very good bit of information to save a guy probably a very good bit of time👍Thankyou... Newest subscriber : Johnny, In Maui. Mahalo🤙
Good vids...prepping. plan on getting a JD...s130 I believe come spring time. I'll miss my Cub 169...and all it's metal/strength and simplicity. but got to go with smaller, lighter, quieter, more comfortable riding. Still looks like half of it is junk/cheap stuff.
You are most welcome, did you see the other 19 videos i made for the John Deere? there all in this playlistczcams.com/play/PLZEGsnRsdHN6EMDlttQ5U8AtlmiOM_zOT.html
I bought a used 135 last year. Caught a branch and that belt came off. Took some figuring without a manual but I got it done. Not bad for a 65 yr old babe.
Like as if doing work under a mower deck. I always take the spark plug out. So there is no combustion in the engine. That way I feel it won't crack, while working on it. Just a little safety thing I do.
Great instructional video! The last pin that you put in for the cable was put in a vertical position, (10:15) it is supposed to go in horizontally and through the little hole.
Thank you for watching, please leave a comment and thumbs up it HELPS YOU TUBE PROMOTE MY VIDEO.
My channel is growing thank you to all my subscribers!
@@DIYJIM thanks Jim you helped me alot
@@squirrelhunter1300 glad to help
@@DIYJIM pop oookk
I did learn something today, just like that. 👍
Best video by far for replacing deck on a John Deere 100 series mower.
Thank you and thanks for watching
Thank You!!!! This helped saved me tons of money from a local vendor trying to change me $1700 to replace it, when it only required to be taken off and clean off the built up dirt and gunk that was built up over the years.
Thank You!
Awesome glad I saved you some money
I have watched all of your videos on the 100 series John Deere tractor and you have been very helpful. I have now learned how to remove my deck, Grease all parts needed, sharpen my blades and maintain my mower at a much lower cost by doing it all myself. Thank You So Much!
Awesome glad I could help you save some money.
I just purchased a used John Deere. This helps me a lot for taking the deck off and cleaning it up. I appreciate your video thank you
Glad I could help
I refer back to this every year when I have to sharpen the blades. Thanks!
Thanks for the views, glad I can help.
Love the gentle easy to follow pace for newbies like me to digest easily. Great video clarity, even in the very dark sections so it is plain what is happening and needs to be done. MANY THANKS
Glad it was helpful!
Just got my first John Deere and wanted to perform a little maintenance, painting, and seat change, and this page was easy to follow, had it off and back on in minutes. Thanks!
Glad I could help thanks for watching
Thanks Jim, just finished replacing both blade spindles on my E130's cutting deck. I watched your videos to familiarize myself with the procedure and it went without a hitch, thanks to you!
Glad I could help thanks for the comment
Just found your channel as I’ve recently purchased a John Deere lawn tractor in the UK. (X135R).
Your videos have been really helpful as I like to do all my own servicing. The way you explain the process is great. Many thanks! All the best from across the pond.
Thanks 👍
John Deere could not make a better video on this maintenance. 2 great tips on what to look for on the brakes and the bearings.
Thanks Christopher
Thank you for making such a well explained and clear tutorial. I had to do some maintenance for my dad's mower and had no idea how to do this
You are welcome! Thanks for leaving a comment and subscribing if you did.
I have had my D110 for 6 years and never serviced it myself (just a couple of times at the dealer). This spring I knew I was on the hook 'cause the blades are completely dull, this video is a great resource. Thank you for making it!
glad I could help
I sincerely appreciate your help and guidance on removing the decking and how to put it together. You saved me a couple hundred dollars. God Bless
So very glad I could help, thank you for commenting
You are the best so far. Many posts are done with good intent, BUT YOU ARE MORE CLEAR AND VERY VERY INFORMATIVE. Video is clean. THANKS FROM A Vietnam Veteran.
Thank you for your service I have many more videos on that mower
One of my blades got stuck in a tree root and I didn’t know what to do. Lucky my mower is the same as your’s . Without your video i would’ve had to but a new mower. THANK YOU!!!!!!!!
Awesome glad I could help
Your video made this job simple. The manual can be confusing, but you explained it just right. Thanks
Glad I could help
Neighbor gave us one of these last year. Runs good after charging battery and fixing tires with green slime. Figured its overdue for blade sharpening. Thanks for the deck removal demonstration. Always easier with a short video before diving into it for the first time.. Saw the 5 pins that support the deck. Belt looked spring loaded. Didnt notice the cable before this video. Thanks.
thanks for watching
Thanks! Thanks for reminding me where the spring connected.
You bet! Thanks for watching
One of the best videos I've seen for the John Deere. I've learned a lot from watching DIY Jim. Thanks Jim!
thank you
I would like to Thank you for these John Deere videos! My father passed away almost 4 years ago and I have been using his D110. Since it was his, I really didn't know much about it and I've been using it to cut the grass but I have been neglecting the maintenance on it (aside from oil changes). Your videos have really inspired me to really "get into" the machine and make sure to keep it maintained so as to keep it running as long as possible. I cannot repay you for the knowledge that you have passed on but know that I am truly grateful!
Glad I could help thanks for watching.
This is more helpful John Deere Video. You solved a problem I have been struggling with for a week. Thanks !
Glad it helped, I have a lot more videos that might help you czcams.com/play/PLZEGsnRsdHN6EMDlttQ5U8AtlmiOM_zOT.html
U help me out because I never did it before thanks a lot. For showing how to install it it was helpful
Glad it was helpful
Thanks for your generosity in sharing how to do this. Time to replace my rusted-out deck.
Glad to help
I thought it was gonna be alot harder I've been worrying about how much work it was gonna take thanks alot
Welcome
Keep up the good work. We're pulling for you.
Thank you! Will do!
That is a great video! I searched for instructions on how to remove the deck on my John Deere 125, and found you. Very clear, concise, and to the point. I will be returning often to learn more about keeping my JD up to snuff! Keep up the good work, my friend.
Thank you Dave
Thanks very much Jim. Appreciate your step by step instructions and video. Best wishes.
Glad it was helpful! Thanks for watching
One of the best DIY videos I've watched. I will be taking out my deck and getting my blades sharp for the weeks of cutting ahead this spring and summer. Nice work and thank you.
Glad you like thanks for watching
Good job explaining things, you are easy to listen to. I have never left a comment before for anything or anyone, so that should tell you something!
Thank you very much
Thanks very much for making this a simple job for me.
Welcome, thanks for watching
This video was super helpful. I really appreciate that you went slowly and showed clear footage of each step. Subscribed!
Awesome thanks Blake
Another great instructional video Jim. I have had my LA105 over her in Australia for about a year (secondhand) and was having all sorts of issues, but after discovering your channel it has never run better or cut better. Thanks for all your efforts.
So glad I could help. How is everything going in Australia? Is everything true what I am hearing you can not barley leave your house? Or is that only one place in Australia? I have prayed for your country. Hope your safe my friend
@@DIYJIM Thanks for your thoughts Jim. I'm in Queensland and we are doing well here. Unlike the southern states where Delta is running rampant. I'm glad I'm not in uniform either these days (24years Air Force) as there is too much on their plates. Really enjoy your videos and have helped me a lot.
@@Raafman42 I work in a prison I really don’t think Delta is as bad as the media is making it out to be. This is coming from nurses and doctors that I know. God bless
Thank you! Great video. Plan to try this soon on and old D170 and at 83 years old I don't expect it to be easy😢😢thanks again!
Hope it goes good for you.
Thank you so so much for this video! You simplified it enough that I can do it myself (I hope!). Being female, it’s always a good feeling to be able to do it yourself 😊. Your videos have helped me a lot!
Glad I can help
You're a lifesaver, dude. Thank you
Thanks for watching
This was very good instruction with good camera work also. I have just purchased an S130 and didn't have a clue how to remove the deck. Now I do, Thanks!
Glad it helped, thanks for watching
great step by step details.. Thanks
Thanks glad I could help
Thanks VERY much for your videos on the John Deere mower. They are very easy to understand and are extremely helpful for me to do the work myself!!!!!
Glad you like them!
Every question I have on these tractors you answer...awesome! God bless
Glad I could help
thanks this is just what i needed. my gas tank is leaking and i need to remove this to find the leak
Glad I could help
Wow! By far the best YT video on working on everything JD 100 series! All others go through too fast to absorb the info or are too “commercially” and hard to follow. Deff subbing for more great content👊
Thanks for subscribing
Watched some other videos as your video wouldn't load for some reason. They were helpful and had good descriptions, but my mower is exactly like the one you are working on in the video and I'm sure an earlier model. The springs went flying when removing the big spring and one I didn't how to put back on and now I do so thank you very much. The other dark one on the brake is ???? Your descriptions are very clear, not too fast if you are new at this, and the video is clear and precise. Excellent job!
Glad I could help thanks for watching
Thank you for posting this video. It’s very helpful.
You're very welcome!
Mate good simple to follow video well done
From Australia
Thanks 👍
Your the best man,thanks
Your welcome thanks for watching
Thanks for the great videos. I like the fact you can get such good camera views on the components as you work on these things. Very helpful.
Thanks for watching!
Excellent video, @ 68 I was able to remove my mower deck by myself and of course your
video....it did take me (female) twice as long. Again, Thank-you, Buzz.
Glad it helped , thanks for watching hope you have a good summer
Getting ready to do this for the first time... great explanations .. thanks
hope it helps ya thanks for watching
Great video Jim. Just successfully took off the mower deck on my D130 to put on new blades!! Brian
Glad I could help! Thank you for the comment it helps my channel out
Thanks for the step-by-step instructions! I had to remove the deck get the welds re-done. Hopefully it will last another year or two.
Glad I could help thanks for watching
Direct and the the point, many thanks!
You're welcome!
Thank you for the video. My E170 does not have the blade engage cable. Other than that step and the spring all the other steps were needed.
Awesome glad I could help
Hi JIM,
This ones coming from France "Yep" France,
A great video simple to understand and once again thank you.
Thank you, I got to visit France back when i was in the Navy.
Thanks so much for the very straight forward review
Your welcome
great video. just a note when you have the deck off go ahead and grease all the moving parts. great idea removing the bearing "sealed" cover.
Thank you again for watching my videos
Good for you boss man! Hope your channel is monetized and making some money for you. DIY and Handyman work will definitely be the highest paying work soon. I truly believe that. Most people can't wipe their own Ace without proper instruction. Thinking about starting my own channel but idk how it all works. Keep at it! God bless
Maybe I should make a video on how to start a DIY CZcams channel thanks for the nice comment it’s a lot of work. I am monetized now it took me about a year before I got my 1000 subscribers
Love your videos Jim!!! I just finished building the ramps by following your ramp video... Thank You...
Awesome glad I could help
Thanks, Jim, for taking the time to produce this excellent video!
Your welcome Alec
I got the deck to my E130 back on and had a pin left. I decided to go to CZcams and get some help. It was the first one you took off, I forgot about that one. I'm 70 and have a difficult time reaching under the machine. I attached the blade engagement spring before I got the deck all the way under the tractor. That way I could see how it went and get some leverage on it.
Awesome glad I could help
very good steep by steep thank you ! Now i can do it myself without paying a dealer Thank You
You are welcome!
Thanks very much for the video.It helped me a lot.
Glad it helped, thanks for watching
Thanks for the good instructions on removing the John Deere 100 series deck!
Glad it was helpful! Thank you for the comment it really helps my videos, and also thank you for subscribing if you did
Great video for very clear instruction. Thank you!
Your welcome thanks for watching
Very well explained, very easy to understand. Great job.
You are welcome
Hi Jim, thanks a lot for this detailed video, it was very helpful. HE may bless you.
You are very welcome
Appreciate the video very easy to follow and understand! I have an E180 so 52 inch deck, only thing I’d add is I needed to take off the front deck wheel in order to get it out.
Awesome, glad I could help thank you for the nice comment
Thanks for the info on deck removal Jim. Very helpful 👍🏼👊🏼🇺🇸
Your welcome thanks for watching
I have the D130, I removed the 2 plastic pully guard covers, so much easier to keep clean.
Thanks again for all you helpful ideas and videos.
Masonry Plus
Fernandina Beach, Florida
President Trump America's Shield.
I might try doing that this summer
Aloha Jim,
Perfect👍
Very clear, very thorough,
Very good bit of information to save a guy probably a very good bit of time👍Thankyou...
Newest subscriber : Johnny,
In Maui. Mahalo🤙
Awesome thanks Johnny I would love to come visit. I went to Hawaii years ago. I would love to take my wife sometime.
Great post! Thank you! Exactly what I was looking for.
Glad it was helpful!
Great video Jim. Made the job a breeze!
Awesome glad it was helpful
That was a great video. I'm a newbie to these things but you make it so easy. Cheers 🍻
Glad I could help thanks for watching
Thanks man, HUGE help.
Glad I can help
Outstanding video. Thank you for taking time to make and post it.
Your welcome, thanks for watching
Yep, just what I needed to know; thank you for posting.
Your welcome
Perfect video and explanation. Just what I needed!
Glad you liked it! thank you for watching
Good job Jim.
Thanks for watching
The simple Jim channel
Thanks
You keep your JD well maintained
Thank you I try
You are the best
Glad I could help thanks for watching
I just wanted to make sure this same procedure will work on my John Deere 107 cm (42in) tractor. Looks pretty easy.
Not really sure I only have one John Deere but if I were to guess it should be close if not the same. Thanks for watching
@@DIYJIM I just finished up and everything went perfectly. Thanks for in informative video.
@@bombsite69 glad it helped
Very neat explanation.Thank you!
Glad to help
Good vids...prepping. plan on getting a JD...s130 I believe come spring time. I'll miss my Cub 169...and all it's metal/strength and simplicity. but got to go with smaller, lighter, quieter, more comfortable riding. Still looks like half of it is junk/cheap stuff.
I like the John Deere but I think your correct they sure don’t build them like they used to. Thanks for watching
Another Great video, thank you.
Your welcome thanks for watching
This helped a lot.
I'm really glad I found your channel.
I subscribed.
Thanks for the sub!
Thank You so much Sir, i just completed this task! You made it very easy, again Thank You Sir!
You are most welcome, did you see the other 19 videos i made for the John Deere? there all in this playlistczcams.com/play/PLZEGsnRsdHN6EMDlttQ5U8AtlmiOM_zOT.html
Thank you! Very informative!
You're welcome!
Thanks! Helped me a lot!
You're welcome!
Thanks Jim, very thorough! 👍
Glad it was helpful!
Excellent video. Camera work is awesome and you know your stuff. I will be watching all of these videos. Thanks 👍
Thanks for watching, glad you like
Great work, I was worried about how to do that. Thanks
Glad I could help thanks for watching
Great help 👍👍👍👍👍
Glad I could help
You’re the best thanks for this video!
Welcome glad I could help
I bought a used 135 last year. Caught a branch and that belt came off. Took some figuring without a manual but I got it done. Not bad for a 65 yr old babe.
thanks for watching, watch out for those branches. Have a good summer
Like as if doing work under a mower deck. I always take the spark plug out. So there is no combustion in the engine. That way I feel it won't crack, while working on it. Just a little safety thing I do.
Great tip! Thanks for watching
Thanks so much this helped a lot! 👍
Welcome thanks for watching
Great instructional video! The last pin that you put in for the cable was put in a vertical position, (10:15) it is supposed to go in horizontally and through the little hole.
Ok thanks for watching
Nice work Jim I'll scope out your other videos
Thank you Russ
Excellent job!
Thanks