Just changed out my 2012 ford fusion passenger side. Easier than expected, the video provided all I needed to do the job myself. Thanks for taking the time to video and post. Much appreciated.
I wish you had shown more detail where the bolts and screws and nipples go when installing the headlight. I had an accident that took out both headlights. I am trying to put it back together piece by piece. The problem I am having is that I didn't get to take it apart. The little things are the most important. Your first video rocks brother.
I didn't detect any dielectric grease in the LED connector he removed and a great way to spur on corrosion and premature failure do to moisture as well as excessive amp draw
could you do a step by step on just replacing the head light bulb. i see some where you have to take off everything as you did here and some where just a couple of things have to be removed. i am not looking to break anything :) appreciate your time, thank you
I need to replace the dust seal cap on back of the headlight. Do you know where I can get it? or can you find out the diameter of the seal cap for me? Thank you.
I have a 2010 Hybrid. Do I have to take the whole bumper cover just to change bulb. In the Hybrid the battery sits right behind the light so no way to just reach in there.
Great video, but I think youve only dealt with eBay HIDs.. Your ballast looks like the Typical eBay rebranded chinese junk. Ive had the Morimoto Elite kit on mine for 4 years now, a true $200 kit. And a little lithium grease goes a long way.
Thanks for taking time to make this video. I bought a 2011 Fusion Hybrid and it needs headlights(cracked lens). Looks like the same between 2011 and 2012 hybrid or not.
This was a huge help! Got the headlamps changed on my 2012 ford fusion se with no problems thanks to the good instructions and examples.
Just changed out my 2012 ford fusion passenger side. Easier than expected, the video provided all I needed to do the job myself. Thanks for taking the time to video and post. Much appreciated.
It’s incredible the lengths they make you go through to change a lightbulb
Great tutorial! Easy to follow. Would not have gone near as smoothly or quickly without this.
Thank you, just replaced a headlight and could not have done it without this video. Piece of cake, great instructions!
I wish you had shown more detail where the bolts and screws and nipples go when installing the headlight. I had an accident that took out both headlights. I am trying to put it back together piece by piece. The problem I am having is that I didn't get to take it apart. The little things are the most important. Your first video rocks brother.
Best video ive seen for replacing the lamp
8:34 it’s a Allen key, I used one on mine worked great
Nice and simple video...the way they should be. Thanks!
Very detailed! Thank you for the help!
Thank you sir, big help.
This helped so much on my 2011 fusion my bottom fog light was full of water
Very helpful. Thank you.
Those scratches look good compared to mine.
Thanks helped me out to this day 💯💯
I didn't detect any dielectric grease in the LED connector he removed and a great way to spur on corrosion and premature failure do to moisture as well as excessive amp draw
Thanks for the video buddy!!
could you do a step by step on just replacing the head light bulb. i see some where you have to take off everything as you did here and some where just a couple of things have to be removed. i am not looking to break anything :) appreciate your time, thank you
One of the better videos I have seen. Thank you very much for a clear, concise demo. And, and, can I have the right sight assy. you took out? 🙂
Thank you
Thanks for this video! I just smoked a deer and it took out my passenger side headlight only luckily!
Man i feel your pain hit a coyote over here on the West Coast
Do your front yellow side marker lights blink with your turn signals on your Fusion ?
I need to replace the dust seal cap on back of the headlight. Do you know where I can get it? or can you find out the diameter of the seal cap for me? Thank you.
I have a 2010 Hybrid. Do I have to take the whole bumper cover just to change bulb. In the Hybrid the battery sits right behind the light so no way to just reach in there.
Hey, did you ever find out?
Great video, but I think youve only dealt with eBay HIDs.. Your ballast looks like the Typical eBay rebranded chinese junk. Ive had the Morimoto Elite kit on mine for 4 years now, a true $200 kit. And a little lithium grease goes a long way.
My driver side dim light won't work on my 2010 ford fusion. The fuses are good. What can i do
You should do one how to remove the grill
Used electrical grease on your connectors and you won't get corrosion
How about using electro greas to prevent corrosion
where can i get the same white bumper at?
I have i few questions I have a Ford Fusion as well
How long did the whole job take you
Thanks for taking time to make this video. I bought a 2011 Fusion Hybrid and it needs headlights(cracked lens). Looks like the same between 2011 and 2012 hybrid or not.
So why did you not say what to do about the corrosion? is it not okay to mess with it and use a electrical spray cleaner>?
Jeasus i think crocodile dun dee wants his knife back lmfao
Standard Marine Corps issue knife, does it offend or scare you?
I’ll buy your headlights
Shoulda just followed the video in the first place 😂
This dude is a back yard mechanic at best.
Long as you got a seal to keep the moisture INSIDE the headlights and a Kabar for when "shit gets nuts", lol.
Kristy
Question...headlight has no power going to it and i cant find any fuses...do i replace the whole headlight?
Matthew Sumpter harness is good. but no power. I can't find the fuses.
fkgolddiggers The fuse box for the headlights is under the steering wheel.
Hey sell me the old ones.
lol--wtf dude--just take off resevoir and bamm--u can get to them--none of this bs fender crap lol--