Video není dostupné.
Omlouváme se.
INNOVA 3011 EXPLAINED!
Vložit
- čas přidán 12. 08. 2024
- Innova 3011. Do you want to know what each Icon mean for your code reader? Watch my entire video to get the full explanation.
Visit my Merch store: mydiyjournal.myspreadshop.com/
Hey man, thanks. Just the video I needed.
thank you so much my friend
Thanks for watching
Green light means ur car is ready to do smog and pass, the yellow light means the car is readin all the codes to see if the car is ready to go or not, the red means u have a code or a few
So he is wrong and yellow does not mean there is an issue?
I went to smog my car and was told they couldn’t connect to car. So I went and a bought a scanner and it connected and gave me a yellow light. So I drove it till the cat o2 and evap stopped and I got a green light. So I’m hoping when I take it today it connects I have no check engine 0 DTC what my reader told me.
@@carlosmeza6439 did u pass n how long u drove it
@@carlosmeza6439did it pass when you went back when it was green light..?
@@MsBrivlogs1 drove it for 3days like like 100 miles and yes it passed once you get a green light your good
What is the USB input for?
My monitor status at top left; flash. Anyone know what that means?
Ones u fix replace all the problems then erase the codes , the light will go from red to yellow and if is all good the light will turn green but u have to drive ur car a couple of miles for that
Appreciate it
Thanks for watching
Excellent video. I have a question for you. I have a 2012 Rogue with a MAF problem p01 01 code. The Nissan dealer replaced the MAF. I replaced the air cleaner. I did not replace the PCV valve yet. The dealer I go to tells me they cannot fix the problem any more than they have because they do not have a Master Technician??? I am going to have to travel a ways to get a dealer with a Master Technician. The engine light has gone on twice now. It is supposedly fixed now. If not and the light goes on again and the car seems to run fine I want to turn off the engine light. I purchased a Walmart Hyper Tough HT 100 code reader. It is not much on instructions. It connects with your phone via Blue Tooth to give an explanation of the code. I do not need an explanation and I just want to turn off the engine light. My question is, do I have to use the Blue Tooth feature with the HT 100 or can I just plug it to the plug in the car, turn the ignition to on, read the code, and push the red button to clear the code??
Thank you, Tom Spero
Hi Tom, so sorry for getting back to you late. I had a Blue tooth Code reader once upon a time, but it was so long ago, I forgot how it worked. If you are still having issues with your light coming on, disconnect your car battery for about 5 minutes and then reconnect. That should stop the light to come back on. Keep in mind that if your car has the same issues or if it has another issue, your light may come back on. I hope my suggestion was helpful.
Is this the same as the Walmart ht-100 when I look for user manuals and things like that for the code reader I have I can't find anything but there's plenty of information on the 3011 did they sell them to Walmart
Not sure of the unit from Walmart.
What does blinking abbreviations in the top left mean?
Refer to your manual because it does explain them. I had to search for it myself.
What does it mean when I plug the tool in but all it's says is error and nothing else.
If you turn on ignition without starting car it should work fine. It will even work if you start the vehicle, bur not necessary. However, if your Innova is reading an error each time, you may have a bad connection issue. Your Innova Reader may be bad or, your connector port.
Hi, can that innova clear srs code and airbag code?
Good question. I don’t have an answer for that one. You may want to call them directly to get the answer.
Are the monitor icons the ones that are currently pending or that have passed how do I know if I finished the drive cycle
You will need to refer back to you manual
@@MYPROJECTS101. well i see in some videos they are flashing mine are just solid icons any idea about that my friend actually just gave me this scanner but it’s the exact one
Mine won’t come on when I plug it in. Does it need to be charged because I have no idea what’s going on
No. This run off your vehicle battery.
Change your cig lighter fuse then it will come on.
How do u delete codes? Fixed the coil but the code still on
red button clears code
It doesnt on my 05 ram 1500
The guy at auto zone told me I can reset the ecu with this.
How?
Can I pass smog with yellow light
Florida doesn’t need it to pass so, not sure.
sister
Yellow with no codes?
Drive cycle needed
Cleaned throttle body after P2101 code and "check engine" dash light went out. Tested with Innova and receive yellow light and 0 DTC display with all but 2 icons flashing. Pushed "erase" and got green light with 0 DTC. Test again and I'm back to yellow light 0 DTC with icons flashing. What am I doing wrong? PLEASE HELP!
It’s been happening to me also on other things. I don’t think you are doing anything wrong. After clearing my code, it comes back on saying the same issue even though it is fixed. It’s usually because of another problem or the same issue. Flashing yellow usually means pending.
Im haveing issues to connect the reader to the app. I saw in the video your bluetooth wasn't on. Wondering if maybe this modle doesnt connect.
No, this does not connect to Bluetooth.
@@MrJwtaylor40 🙏🏽 for takeing your time to respond. Blessings to you!
If code erased (by accident) will it return? And about how long would that take?
Yes it will return but not as quickly as it should. Mine took about a week or two.
Do you have to drive the car a bit in order for the codes to return ?