How To Make Your Car Last A Long Time - Simple Checks

Sdílet
Vložit
  • čas přidán 8. 09. 2018
  • Simple Maintenance Checks For Your Car Every Six Months
    How To Inspect Your Car - Sponsored by Progressive
    Check out EE on Life Lanes - pgrs.in/2NvUczc
    Subscribe for new videos every Wednesday! - goo.gl/VZstk7
    The best way to keep your car in great shape is to regularly check the vehicle and keep up with preventative maintenance. This video will outline simple checks you can make on your car. The more frequent you check things like tire pressure and engine oil the better, but it's good to check all of the items in the video at the very least twice a year.
    We'll look at three main sections in this video. First we'll discuss tires, brakes, and suspension. Next we'll look under the hood and look at fluids and filters. Finally we'll look at exterior checks such as lights and wipers. Catching any issues early can help you make sure your vehicle lasts as long as possible.
    Don't forget to check out my other pages below!
    Facebook: / engineeringexplained
    Official Website: www.howdoesacarwork.com
    Twitter: / jasonfenske13
    Instagram: / engineeringexplained
    Car Throttle: www.carthrottle.com/user/engi...
    Amazon: www.amazon.com/shop/engineeri...
    EE Extra: / @engineeringexplainede...
    NEW VIDEO EVERY WEDNESDAY!
  • Auta a dopravní prostředky

Komentáře • 2K

  • @sogerc1
    @sogerc1 Před 5 lety +4209

    This reminded me of a joke, in a car parts store the customer says: Could I get a longer dipstick, because this one doesn't reach the oil!

    • @danield8528
      @danield8528 Před 5 lety +81

      OH NOO

    • @bryelg.9939
      @bryelg.9939 Před 4 lety +28

      😂

    • @LCol718
      @LCol718 Před 4 lety +6

      Hahaha

    • @dominicancheif117
      @dominicancheif117 Před 4 lety +21

      It took me a second to get it but man that’s funny

    • @billyjack8119
      @billyjack8119 Před 4 lety +31

      Ya dont laugh. I tore down a pontiac engine that someone rebuilt and forgot to bolt the little curved tube back on the block. The oil pan was full of broken off dip sticks and one brazed together. Every new dipstick would go straight into the crank. Another funny note was the crank rod journals were ground .010 under but standard bearings were installed. It never knocked when it ran. Hard to believe

  • @KJ-iq7fm
    @KJ-iq7fm Před 5 lety +1676

    2:50 Prior to checking oil dipstick level, make sure the car is on a level surface! 🤪✅

    • @SuperJerot
      @SuperJerot Před 5 lety +42

      And also that you check your oil level with the engine temp the same as last time you checked.

    • @aygwm
      @aygwm Před 5 lety +111

      KJ also make sure the car is cold when you check oil level for the most accurate reading.

    • @JD-yx7be
      @JD-yx7be Před 5 lety +94

      also make sure your car even has a dipstick like bmw

    • @svtwrc
      @svtwrc Před 5 lety +63

      A hot motor will read low as the oil is circulated throughout, a cold car will have the oil collected in the pan for a proper reading. Oil is tricky as overfilling causes seal leaks and pressure buildup , not enough oil will cause seizing of the internals. It’s all about that sweet spot baby.

    • @jptrainor
      @jptrainor Před 5 lety +31

      I suggest that you do what the manual suggests re hot or cold oil check. My Odyssey says hot oil level check. My Civic says nothing, so I presume cold.

  • @growing367
    @growing367 Před 3 lety +1169

    0:31 Tires
    1:45 Brakes
    2:25 Shock Absorbers
    2:51 Engine Oil
    4:22 Brake Fluid
    4:31 Coolant
    4:45 Windshield Wiper Fluid
    4:51 Engine Air Filter
    5:17 Cabin Air Filter
    5:42 Windshield Wiper Blades
    5:56 Lights

    • @tokysh5218
      @tokysh5218 Před rokem +3

      Should you check all these every 2 weeks? Or what?

    • @Dansk55
      @Dansk55 Před rokem +32

      @@tokysh5218 Every 6 months... also depends on how much you drive. I work from home and drive barely 6k miles a year. I still check my car every month or so

    • @peterquest6406
      @peterquest6406 Před rokem +25

      Don't forget your flux capacitor

    • @YunoCake
      @YunoCake Před rokem

      Thank you

    • @dragan3290
      @dragan3290 Před 11 měsíci +9

      ​@@peterquest6406and the blinker fluid

  • @ShintekBeats
    @ShintekBeats Před 5 lety +580

    I love how you never ask people to like or subscribe, I watch all of your videos

    • @MysticBoltz
      @MysticBoltz Před 3 lety +16

      But you haven’t subscribed or liked any of them

    • @usmanmansoor1998
      @usmanmansoor1998 Před 3 lety +3

      This guy really knows his stuff. Appreciation from Pakistan.

    • @WTF-sh4is
      @WTF-sh4is Před 2 lety +2

      And you’ve never subscribed…..rude…..

    • @DjStiv3
      @DjStiv3 Před 2 lety

      Lol really? I havent noticed. Im liking the vid just bcz of that lmao. Now lets tune in.. i know the basics but lets see what advice he.. gives.

    • @samalj313
      @samalj313 Před 2 lety +2

      This comment made me subscribe.

  • @ytechnology
    @ytechnology Před 5 lety +1677

    For cars still equipped with a spare tire, it's good to check the pressure at least once a year.

    • @DanUtley
      @DanUtley Před 5 lety +65

      Mike Y So few people think of this. You can also keep a bike pump in your car in case that’s not enough. This can also help if you picked up a nail or something that causes a low leak leaving you with low tire pressure at the end of a work day, but it’s slow enough that you can pump it up and get to where you need to get.

    • @rjadiemen
      @rjadiemen Před 5 lety +35

      You just blew my mind, im gonna check this right now!

    • @jessstuart7495
      @jessstuart7495 Před 5 lety +63

      A few other things that are good to check...
      1. Look for small cracks forming in the sidewalls of the tires. If you don't put a lot of miles on a car, and it sits outside a lot, the rubber compounds in the tire can become brittle and crack in the sidewalls before you wear off all the tread. Tire shine especially for crack prevention might help, but you have to remember to spray the inside sidewalls too.
      2. Automatic transmission fluid smell/color/level, although some cars don't even have dipsticks, or the manufacturers claim you never need to replace the ATF ("lifetime" whatever that means).
      3. Power steering fluid level check (although less cars have power steering pumps these days).
      4. Check the battery terminals (posts) for corrosion. If you have a wet-cell battery, check the water levels, and add distilled water as necessary.
      5. In the summer, with the car fully-warmed up, and the air conditioning on, verify both electric cooling fans come on after the car has been idling for a while.
      6. If you don't know the car's history, check the temperature rating of antifreeze using a hydrometer before it starts getting cold outside.
      After adding engine oil, I always start the engine and let it run for about a minute, shut it off, then wait another minute before I recheck the oil level.

    • @z33tanner
      @z33tanner Před 5 lety +15

      This, so many spares ive tried to use for people are flat because they don't ever check them!

    • @draxus1266
      @draxus1266 Před 5 lety +1

      Indeed.

  • @justineugenio967
    @justineugenio967 Před 5 lety +1625

    This video should be shown to every new driver as a go-to on basic maintenance. Excellent video as always, keep up the good work.

    • @EngineeringExplained
      @EngineeringExplained  Před 5 lety +27

      Thanks Justin!

    • @bassam_salim
      @bassam_salim Před 5 lety +18

      Some old driver should see this too, a lot of people don't know how to check their tires while they're driving for years

    • @TheSethxy
      @TheSethxy Před 5 lety +15

      Most people don't read the owners manual to a car. Maybe they should make an app that gives you reminders with a 30 second turorial so to keep peoples attention.

    • @nomadmav7040
      @nomadmav7040 Před 5 lety +11

      Every parent should be teaching their kids these things. But the newer gen parents dont know how to change a tire or oil.
      Most cars now dont even have keys. So soon ppl wont even know how to start a car with a key.

    • @laysone346
      @laysone346 Před 4 lety +4

      So many cars go down the shitter just because some people don’t know to check their car every once in a while

  • @PhilTheThrill
    @PhilTheThrill Před 5 lety +423

    I took an auto tech class in freshman year and they teach the same. Its a shame that now they got rid of shop classes last year or I would have taken it again. They rather have everyone go to college than learn about cars.

    • @manukawickramasinghe8931
      @manukawickramasinghe8931 Před 2 lety +3

      wassup phillthe thrill I didnt know u r watching his videos LOL

    • @johnlozauskas778
      @johnlozauskas778 Před 9 měsíci +14

      No, they would rather have everyone learn how to lease a car, not self awesome preventive maintenance.

    • @MementoVita
      @MementoVita Před 2 měsíci

      Man I took that same class but I was a sh*thead in school so now I’m here paying for it. Stay in school kids

  • @literatesavant
    @literatesavant Před 5 lety +213

    Something I would add to the discussion about tire checks: look at the date codes on the tire sidewalls, and make sure yours aren't too old. Five years is generally considered to be the useful service life of a tire. I replaced a seven-year-old set of tires, which weren't very worn because I did not drive the car much, and was shocked at the improvement to the handling and braking performance of the car. Rubber hardens over time!

    • @daveroberts7295
      @daveroberts7295 Před rokem +12

      I experienced this twice. I had an MR2 that I only drove in the summer. At year 6 on a set of tires the ride went to heck. I was thinking of getting a wheel alignment done when I talked to my mother. Her first words were, how old are the tires. A new set of performance tires and I had a new ride, fabulous. My mothers knowledge is extremely broad, either she has an answer or she will say I don't know about that. Car number tow was a Buick Le Sabre, an old helicopter pilots car, low mileage, all service done by a garage by the airport where all the pilots get service. Tires looked mint, he had died a few years before and I bought it from his widow, no visible wear. I was taking the car on a run to the east coast from the Rockies, where it would stay. At the end of the first days driving I noticed the date on the tires, 7 year old. I had them replaced the next day. It felt like all four tires were out of balance. The Saskatchewan farmer who ran the garage said he would put them on some farm equipment.

    • @meltingspot1064
      @meltingspot1064 Před 9 měsíci +1

      How much you pay for a set of tires?

    • @theglassarrow_
      @theglassarrow_ Před 7 měsíci +2

      @@meltingspot1064 Really depends on what kind of tires you get. Personally I normally spend around $800. Do some research and order what you think is best yourself and have professionals install them. Only time I had tires straight from a shop, they where pretty shitty and where unbalanced and got them rebalanced 2 months later.
      Tire quality really changes how a car feels, cheaping out has a big impact.

  • @MattMaranMotoring
    @MattMaranMotoring Před 5 lety +1346

    Great tips Jason! This should be shown in driver's ed classes!

    • @EngineeringExplained
      @EngineeringExplained  Před 5 lety +29

      Thanks Matt!

    • @tsjeriAu
      @tsjeriAu Před 5 lety +17

      These are all part of drivers education in Norway (except maybe checking brake pads yourself), though sadly most people forget this info the second they "graduate".

    • @sienile
      @sienile Před 5 lety +9

      @@tsjeriAu - It still stays with some, which makes the roads a bit safer, I'm sure. Basic maintenance should be required knowledge and made easy enough for most people by the manufacturers. (No dipstick deletes like are becoming more common, or air filter boxes requiring tools to open, etc.)

    • @pmoney5654
      @pmoney5654 Před 5 lety +1

      Agreed

    • @geetjuhhisdebeste
      @geetjuhhisdebeste Před 5 lety +6

      In Germany it was part of my driver's education because my teacher was great, but is is officially obligated to have basic understandings of your car and the examinator may ask you during your test (to get your licence) to show how to check engine oil, or where I can see if brake fluid level is properly. Also, you need to go through a first-aid cursus and get prove that your eye-sight is healthy. Additionally, emergency braking is also part of education. (and in my case a winter drifting cause my teacher just is the best)
      In The Netherlands eye-sight is checked by simply question of examinator to read number plate at certain distance, often times a joke of a test. Then, just hop into the car, drive along at speed limit, brake hard, don't overlook Dutch bicycle's and park you car correctly (corrections are allowed) which can even be a simple straight on parking, not even rear parking or side parking. Lol. Oh ... and better never drive here because 1. drivers are morons who think the road is only belonging to them 2. any possible ticket will cost you lots of money.
      In Belgium drivers are not obligated to follow official driving education. They can choose to either get official education, or learn from someone who has his/her licence longer than 8 years. Learning can thus be by getting lessons from your parents. You can drive around as long as they sit next to you.

  • @slep5039
    @slep5039 Před 5 lety +1557

    Can't believe you missed the most important fluid, blinker fluid. Just by driving around on the roads today, you see that low blinker problem is a highly common yet dangerous mistake. Maybe can you do a video of why Lexus, BMW, and Mercedes leak this fluid faster than any other car?

    • @heanstone1327
      @heanstone1327 Před 5 lety +19

      Ceazar Carr not all cars have one

    • @Slowcarfastbeans
      @Slowcarfastbeans Před 5 lety +16

      Hah, it’s only if you use them!

    • @dannycool59x49
      @dannycool59x49 Před 5 lety +143

      the day I see a bmw using its blinkers is the day I win the lottery

    • @TheBigNate505
      @TheBigNate505 Před 5 lety +69

      dannycool59x Im a bmw driver and always use my blinkers. I think some bmw drivers just forget to top up their blinder fluid!

    • @Nick-ko1tw
      @Nick-ko1tw Před 5 lety +5

      Drain it and u're good to go

  • @nat99997
    @nat99997 Před 4 lety +66

    This man is a true professional, even after he said 'after you clean it off you stick it back in' he didnt even say thats what she said. An icon.

  • @alaskanhorizons
    @alaskanhorizons Před 2 lety +20

    My Prius has over 300,000 miles and runs like new. It's never had any repairs. I just follow the maintenance schedule religiously by using a program on my laptop called Automotive Wolf that tracks the maintenance schedule, expenses, fuel usage etc. It calculates a cost to own and operate the vehicle taking into consideration all those factors and my Prius is at $0.05 per mile. My Jeep costs $1.63 per mile. So not only is my Toyota extremely reliable it's also very cost efficient.

  • @MicraHakkinen
    @MicraHakkinen Před 5 lety +74

    There are two things I'd like to add to this excellent video:
    - Brakepads: unless you can have a good look at both the inner and outer brakepads, take off the wheel at least once, preferably twice a year. The caliper slide pins don't wear very fast, but eventually they will start to move less smoothly and can start sticking, resulting in uneven brake pad wear. If for example you only look at the outside pad, it may seem completely fine, meanwhile the inside pad can be heavily worn or in more severe cases even have started wearing at an angle. The earlier you catch this, the cheaper the fix is probably going to be.
    - Brake fluid and coolant: these are both closed circuits, you shouldn't have to add any fluid. If you do need to add coolant, this indicates a leak. If you do need to add brake fluid, this indicates a leak or worn brakes (the thinner the brake pads get, the more fluid remains in the caliper to compensate). In any case, adding fluid does not fix the cause of the low fluid level. You should only add fluid if it is to get you home or to a mechanic.

    • @Gman07024
      @Gman07024 Před 7 měsíci +1

      Doesn't coolant get used up over time like it doesn't all return to the reservoir

    • @MicraHakkinen
      @MicraHakkinen Před 7 měsíci +4

      @@Gman07024No, because it's a closed circuit. If the coolant level drops, then that means coolant is leaving the system somewhere. This can be through a leaking headgasket, leaking hose, leaking radiator, etc. But a properly functioning vehicle should not lose any coolant.
      The level you see at the coolant reservoir can vary, this is normal. Because when the coolant gets hot, it expands, so the level will seem higher. And once the vehicle is cool, the level will seem lower again.
      There will be markers on the reservoir indicating the proper level(s). Some vehicles will have markers for both cold and hot, others will have a minimum and maximum level indicator for cold, etc. It's not always immediately obvious how to interpret the markers, in which case you can check your owners manual.

    • @Gman07024
      @Gman07024 Před 7 měsíci +3

      @MicraHakkinen oh okay so you'd only have to replace the coolant is it's no good anymore or after you've fixed your coolant loss problem.
      Can brake fluid "go bad" ?

    • @MicraHakkinen
      @MicraHakkinen Před 7 měsíci +4

      @@Gman07024 Yes it can. It's a closed circuit so if you're losing brake fluid, there's a leak somewhere. However many types of brake fluid (DOT3, DOT4, DOT5.1) are hygroscopic, meaning they absorb moisture from the air. Most manufacturers recommend changing the brake fluid every two to three years for the hygroscopic kinds, and about 5 years for the silicone-based DOT5, again your owners manual will likely tell you exactly what's recommended for your vehicle. Also make sure to use the correct brake fluid as indicated by the manual. Using the wrong kind can lead to extensive damage to the entire braking system.
      Over time the water content of hygroscopic brake fluid increases. This is bad for two reasons. First of all, brakes can get very hot (which is normal), but if there's too much water content in the brake fluid, then this water can evaporate and create vapor bubbles in the fluid. Fluid can't be compressed, so it transmits the force from your brake pedal to your brake calipers. However gas can be compressed, so if a vapor bubble forms, pressing on the brake pedal just compresses that bubble, instead of forcing the brake pads against the rotors. While it is unlikely for this to happen under normal driving conditions, it's better to prevent the possibility of it happening at all.
      Secondly a high water content in the brake fluid can cause brake lines to corrode from within. This is not only much more expensive to repair compared to just changing the fluid on time, but springing a leak in a brake line can obviously be very dangerous as well.

    • @Mredgreen001
      @Mredgreen001 Před 6 měsíci

      I dont like ppl putting out false information like this. You have a coolant resovior for a reason.

  • @alc.8415
    @alc.8415 Před 3 lety +40

    Also for the shocks/struts: push down on each corner of the car, let go, and observe: if it comes back up and stabilizes, you're good. If it bounces about 2 times and stabilizes, they're going bad. If it keeps flopping around like the car's on a waterbed, those shocks/struts are a danger to your life and anyone else driving next to you.

  • @saarcful
    @saarcful Před 4 lety +54

    This man is really straight to-the-point always, he doesn't talk unwanted things. Covered lot many things within short time. I love his videos!

  • @danielwalker2874
    @danielwalker2874 Před 4 lety +7

    All I’ve ever own was high mileage vehicles. Lowest one I’ve owned at the time I bought it was 175,000 miles. Everyday or every 3 days I always check the fluids and tires. Every week I clean filters, and then change my oil around the 5,000 mile mark. Having or buying a high mileage vehicle isn’t a bad thing. Just know how to check everything and your good to go.

    • @s6g2k
      @s6g2k Před měsícem

      I bought one new vehicle once. I remember being really nice and not using the foam brush at the car wash, hand wiping instead. Even after a month I was wondering where all these scratches were coming from.
      Contrast to a different beater car I had and someone gave me a light bonk when they ran a stop sign.
      "I don't need to report this if you don't care."

  • @manfromnantucket9544
    @manfromnantucket9544 Před 5 lety +522

    Not a fan of Subarus, but their oil filter placement is the single greatest automotive innovation of all time.

    • @Debergaizen
      @Debergaizen Před 5 lety +6

      It is certainly neat, but I wonder, what happens when you unscrew it? Does the gravity empty the oil in it every times you turn off the engine or do you have to unscrew it quickly before it leaks sludge everywhere on the engine?

    • @priatalat
      @priatalat Před 5 lety +24

      @@Debergaizen Gravity. As long as you drain the oil before taking the filter off nothing will leak.

    • @MCatwar
      @MCatwar Před 5 lety +7

      my BMW does this too and it's pretty great. it's in a housing so the filter is a cartridge; makes high quality oil filters extremely cheap. I'm talking 3 to 5 dollars for a Bosch. also, no mess with removing it, because as stated, gravity drains all the oil from the cartridge when you drain the oil too. its great

    • @MCatwar
      @MCatwar Před 5 lety +3

      what's not great is the 32mm socket to take it off. older bmws used a 13mm which was much smarter

    • @TheMegaElmo
      @TheMegaElmo Před 5 lety +2

      Yeah my E36 BMW has a oil filter housing with the filter inside, it really is easy to change, as you dont get oil dripping down, after unscreqing the 13mm bolt the oil from the housing drains down. It's pretty neat

  • @JustSomeOldGuy
    @JustSomeOldGuy Před 5 lety +110

    Before driving at night or before going on a long car trip, check to see that ALL your exterior lights are operating correctly. There's no need to give the police an easy excuse to stop you. Especially when traveling out of state.

    • @brianheath5091
      @brianheath5091 Před 5 lety +9

      And that includes license plate light, which is often overlooked! I got profiled in my '94 F-150, and that was all they had on me. Glad I only got a warning, and just spliced the wires back together.

    • @stephencannon3140
      @stephencannon3140 Před 3 lety

      Good point also remember that ANY external light is subject to being graded section of a state safety inspection........
      That means if the safety inspector wants to be a jerk they COULD fail you for let’s say Fog Lights. Not legally required but if it’s there it is subject to inspection..

    • @prycenewberg3976
      @prycenewberg3976 Před 3 lety +2

      "... out of state [with a body in the trunk]."

  • @fourseasonadventure8589
    @fourseasonadventure8589 Před 5 lety +30

    Pro tip for checking your tail lights: Back the car up to the garage door, or wall. Test the brake lights and see in the rear view mirror if the tail lights are reflecting off that wall. This is just a quick check method though.

    • @99bn99
      @99bn99 Před 10 měsíci +2

      Just put a stick (or your "club") between the seat and the brake pedal.

    • @svenmorgenstern9506
      @svenmorgenstern9506 Před 5 měsíci +3

      My method is to find an office building with reflective glass, park so I can see the rear of the car reflected back at me, then tap dem brakes. You'll know immediately if you've got a faulty brake light. 💪

  • @andreguilhermediasarraiano9287

    The way your content just flows through the videos makes me feel like they last less then they actually do. Thanks again for all the info, and for encouraging us to do it ourselves and properly. Cheers from Brazil!

  • @anthonylau3065
    @anthonylau3065 Před 5 lety +64

    That last tip on check brakes lights is a good one. Better than using an umbrella to hold the pedal down. I used to park backwards in front of a store and use the glass reflection to check all those lights with my rear view mirror.

    • @muulee2254
      @muulee2254 Před 5 lety +2

      That's smart! I will do that!

    • @samf179
      @samf179 Před 5 lety +2

      It would be great if cars had a switch somewhere in the cabin (like under the steering wheel or something) that you could flick on to engage all or selected lights. A bit like what they have in Aeroplane cockpits. It would save having to ask someone to step on the brakes for you

    • @samf179
      @samf179 Před 5 lety

      @@garymathe9863
      I usually use my cinder block on the accelerator when Im on the highway. Saves having to hold the pedal down with your foot when you dont have cruise control

    • @tomasdeleondominguez7693
      @tomasdeleondominguez7693 Před 4 lety

      I do the testing at night

    • @Anthony-kj2zj
      @Anthony-kj2zj Před 4 lety

      Also when at a stop light, you can sometimes see your brake lights reflected in the front of the car that's behind you. But I would suggest getting out and looking at your license plate lights, if you have two lights on your license plate, and one of the lights not working, it can be difficult to see that in just a reflection.

  • @Conservator.
    @Conservator. Před 5 lety +224

    Never took your vids very serious but now that you’re wearing those glasses 👓 you’ve got so much more authority!

  • @robbyrob8349
    @robbyrob8349 Před 4 lety +7

    I have a 2015 Ford Expedition and I kept up with my tire rotations, engine oil, coolant, Rear end gear fluid, transmission fluid changes and haven’t had any engine problems at all. Great video👍

  • @cesarsanchez9697
    @cesarsanchez9697 Před 3 lety +5

    Excellent video Sir! It seems like just yesterday I discovered this channel. Now about 2.5 million subscribers later it's still going strong! I really appreciate all the great knowledge you've shared with us. Keep up the good work!

  • @Ultrazaubererger
    @Ultrazaubererger Před 5 lety +515

    Let the car rest for a night before you check this stuff.
    I once tried to refill the coolant after coming home from work... It was worse than a shaked coke bottle :D

    • @EngineeringExplained
      @EngineeringExplained  Před 5 lety +161

      Ha, yes, definitely don't open the radiator when it's warm!

    • @yasirsaheed
      @yasirsaheed Před 5 lety +120

      Dude 😂most cars have a label right next to the radiator cap, warning you not to open when the Engine is hot & leave the car to cool down before opening

    • @Ultrazaubererger
      @Ultrazaubererger Před 5 lety +60

      @Yaserinski Shahidovich: After 15 Years those stickers tend to either become black from the dirt or just disappear ;)
      I was lucky that I reacted quick and closed it up once the hissing noise started
      But actually it was a good thing, now i will never forget to let the car cool before opening anything.

    • @bassam_salim
      @bassam_salim Před 5 lety +28

      @@Ultrazaubererger You learnt it the scary way.

    • @sogerc1
      @sogerc1 Před 5 lety +11

      And also the engine oil has to settle. Some people say 15 mins is enough for that but it's not, I wait at least 3 hours.

  • @trickylifts
    @trickylifts Před 5 lety +407

    You should also check the VTEC solenoid to see if you get those mad gains.

    • @UNL34SH3DD
      @UNL34SH3DD Před 5 lety +23

      10hp+ if u have k&n sticker there

    • @craystuff9390
      @craystuff9390 Před 5 lety +6

      lasagna bloke this is so funny 😂 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂 this joke is the new internet sensation 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂very funny m’lady😂😂😂😂😂😂😂

    • @chocolatetampon4492
      @chocolatetampon4492 Před 5 lety +1

      Cause I bet you own a car with true vtec I'm sure..

    • @jaysoneway
      @jaysoneway Před 5 lety +5

      It's a honda thing. A how to maintain a boosted engine should be his next video!

    • @r4ym1n13
      @r4ym1n13 Před 5 lety +1

      Can you post a video for the location of this part ?

  • @emilychang968
    @emilychang968 Před 3 lety +4

    Simple, Short, and Straight to the point. Definitely my go-to for basic car check-up video.

  • @Nick-ko1tw
    @Nick-ko1tw Před 5 lety +386

    another tips, if your car have Fiat badge on it, take it off immediately. hopefully it will make it last longer by 1 day.

    • @mjames2117
      @mjames2117 Před 4 lety +21

      FIAT.. Fix It Again Tomorrow

    • @paolovalzelli
      @paolovalzelli Před 4 lety +12

      Actually in Italy FIATs are pretty reliable. Maybe this myth is only true in the US? I'd like to see some data about this

    • @Cherokee93
      @Cherokee93 Před 4 lety +6

      @@mjames2117 "you know what ford stands for fix it again tony" -Dale Gribble

    • @fadilkmeeran8086
      @fadilkmeeran8086 Před 4 lety +7

      Fiat has absolute gem of engines....!Italy?❤️

    • @shifty2755
      @shifty2755 Před 4 lety +2

      @@Cherokee93
      FIX OR REPLACE DAILY

  • @benakachandrashekar46
    @benakachandrashekar46 Před 5 lety +45

    It's sometimes the basic stuff that we always tend to forget to check. I have been following all of your videos and it's such a joy to see you sharing such immense knowledge you have with everyone. Much love to you brother, all the way from India ❤️

  • @Syntheticoilprotection
    @Syntheticoilprotection Před 5 lety +77

    This is a great video with informative information for everyone. Another thing that's extremely important is the quality of the fluid that you use in your vehicle. The amazing part is by using a better fluid everything cost significantly less money in the long run😊

  • @kuraudo9700
    @kuraudo9700 Před 5 lety +562

    This guy looks old and young at the same time.

  • @fh1980ram
    @fh1980ram Před 5 lety +35

    Don't ever forget to check your blinker fluid.

    • @DonTruman
      @DonTruman Před 3 lety +1

      And only use the very best blinker fluid, for bright blinkers that flash smoothly.

    • @elcocaino8728
      @elcocaino8728 Před 2 lety +1

      A man of culture

  • @Mike-nf6nf
    @Mike-nf6nf Před 5 lety +183

    Ah, there's an air filter for the CABIN. I'll just go ahead and change the stock one in my 1998 Honda Civic. BRB...

    • @smithjohn4156
      @smithjohn4156 Před 4 lety +57

      Spray it with a little cologne, turn the ac on, and watch the panties drop.. lol

    • @SidOfRivia
      @SidOfRivia Před 4 lety +4

      Smith John good tip lol

    • @smithjohn4156
      @smithjohn4156 Před 4 lety +12

      I sprayed my girlfriends with new car scent when I wrote the upper comment. It still has the smell. Lol

    • @gibran8751
      @gibran8751 Před 4 lety +34

      Spent all day looking for one in my 97 Honda Accord.
      They introduced the cabin air filter in the 98

    • @danield8528
      @danield8528 Před 3 lety +1

      I have no idea how to take it out. I've pulled on the tabs for the globe compartment and still can't do it.

  • @lstellway
    @lstellway Před rokem +4

    Great video!
    Quick note to anybody changing windshield wiper blades:
    If you keep the OEM blade assembly, you can often purchase replacement rubber inserts
    (saves money and less waste!)

  • @mochatheartist
    @mochatheartist Před 2 lety +2

    Thank you SO much for this video!
    Even though I've been driving for about 6 years, I feel I was never taught how to properly care for my car
    (other than just take it in for oil changes and tire rotations).
    I'm now buying a new car, and really wanted to do my research on how to get the best, longest life from it.
    I really wish drivers were offered more information on general care both when they start driving, and buy a new car.

  • @Nsix4
    @Nsix4 Před 2 lety +1

    Soon to be a new driver, I wanted to make sure I knew how to take care of a car as I'm planning on getting one in the next month. Thanks for the informative video! I honestly expected that more would be needed to keep a car is good shape, but it seems that you just need to check these things often enough and make sure they get the attention they need.

  • @evan8tor21
    @evan8tor21 Před 5 lety +136

    Hey Jason, can you also show the Audi drivers how to properly set the adaptive trace control systems on their cars? They usually set them to follow your car way too close on the highway.

    • @EngineeringExplained
      @EngineeringExplained  Před 5 lety +23

      😂

    • @FlamingBasketballClub
      @FlamingBasketballClub Před 5 lety +2

      😂

    • @evan8tor21
      @evan8tor21 Před 5 lety +4

      Mr1983abraham my uncle’s 2016 m238i doesn’t even have blindspot indicators so idk how much you have to pay for trace control

    • @DrWhosmate
      @DrWhosmate Před 5 lety +6

      Usually, they are tailgating someone who isn't pulling over when not overtaking, I don't condone tailgating but....f***...the amount of oblivious, arrogant drivers there are out there whom hog the outside and middle lanes, refusing to move back into a lane with space beside them is ridiculous to the point I actually understand their frustrations (even though I don't endorse). If everyone adhered to proper overtaking procedures our highways would not be nearly as clogged up as they are. Audi's drivers are just more sensitive to this problem than other drivers are. :-D

    • @williamwallace1385
      @williamwallace1385 Před 5 lety +3

      Evan Nadeau do you find yourself driving In the left lane when this Happens?

  • @wb7370
    @wb7370 Před 4 lety +7

    I wish i had a teacher like this..he talks were u can understand everything he says, such a pleasant guy

  • @89andresp
    @89andresp Před 5 lety +1

    What a simple and precise way to explain this basics! Congratulations, keep up the good work explaining in a simple way what we are taught or selftaught as mechanical engineers in school or after school if we like cars.

  • @taylorsimone8846
    @taylorsimone8846 Před 3 lety +1

    Many more people need to watch this. I've known some of these but I never thought about checking the filters

  • @RandomGuythatscool
    @RandomGuythatscool Před 5 lety +13

    Love your channel, so many things to learn. Thank you for that!

  • @redfalcon4469
    @redfalcon4469 Před 5 lety +6

    Bottom oil leaks, diff oil, trans oil, belts, pulleys, axel shaft boot leaks, ball joint , bushings, wheel bearing, spare tyre,e brake adjustment ,lubricate door hinges , battery terminals, .....etc.

  • @rickyALH
    @rickyALH Před 3 lety

    Thank you for posting this video; this is very useful for someone (such as myself) who would like to know more about basic maintenance of a car, but isn't very knowledgeable about the topic!

  • @jamesoren7238
    @jamesoren7238 Před 5 lety +15

    Low-fi tip for checking your rear lights - do it with the back of the car to a wall in low light- like your garage, or a parking garage or at night. You'll be able to see the lights reflected and tell which side they come from. Easy quick check whenever it occurs to you and you're reversed into a spot

    • @supershyguytoast5776
      @supershyguytoast5776 Před rokem +1

      I double to that (plus you can check your reverse lights as a bonus).

    • @adamchirico7724
      @adamchirico7724 Před 10 měsíci

      I check them using the big plaza windows at night haha

  • @bretzi111
    @bretzi111 Před 5 lety +23

    Also check the sidewall of the tyre for bulges, cuts and exposed chords

    • @saxdogg69
      @saxdogg69 Před 5 lety +5

      Exposed chords....like this tire B-flat?

  • @Tore_Lund
    @Tore_Lund Před 5 lety +12

    Just the right season for this video. Us in northern territories dash to fix the small annoyances before winter sets in. Having to crawl under your car in 5°F with total numb fingers is not fun.

  • @Mattthemerciful
    @Mattthemerciful Před 2 lety +1

    This is great! Quickly goes over everything in a short amount of time. Great job!

  • @adriandecu6846
    @adriandecu6846 Před 5 lety

    Thank you!
    That is correct 100 %! From experience, I change brake pads when they have around 3 mm thickness of active part. Happened to loose active part, due to hard braking in traffic environment. Were less than 2 mm ;)...
    Still, you are the first to hear from, this useful tip ... Keep up! A very good day to you!

  • @lyianx
    @lyianx Před 5 lety +148

    Something to note about Tire Pressure. I hurts when i see this, and when i didnt know anything even i used to do it. DO NOT use the "MAX PSI" rating on your tires as a marker for how much you should fill it. I see it alot where people who are airing up their tires, will look at the PSI rating on the tiers and fill it up to that.
    This video is correct. Use the door sticker or manual, NOT the tire itself.

    • @unknown1859
      @unknown1859 Před 5 lety +10

      32 psi is fine. Make sure its cold

    • @dylandetails361
      @dylandetails361 Před 5 lety +9

      I didn't even think to check the tires. I always just went off of the sticker in the door.

    • @sienile
      @sienile Před 5 lety +5

      Yes, but in the case of non-standard tires/wheels, you generally want about 10 psi below the max rating if the tires are not similar to the standard tires. (i.e.: off road tires, under/oversized rims)

    • @CC-uh8gl
      @CC-uh8gl Před 5 lety +3

      But it is perfectly fine to use the max psi if you are storing a car for the winter.

    • @camperpro482
      @camperpro482 Před 5 lety +3

      Cool story bro.

  • @kern417
    @kern417 Před 5 lety +389

    In 10 years, this will be a 60 sec video on how to navigate to your "Vehicle Status" menu on your infotainment screen.

    • @billandyeng
      @billandyeng Před 5 lety +31

      My car has a digital dipstick for the engine oil. Useless piece of junk that's slow to read, inaccurate and a real 'dip stick'.

    • @kern417
      @kern417 Před 5 lety +7

      @@billandyeng same on mine. After changing the oil i have to drive 10 min before it can read my oil levels. Pretty stupid.

    • @jakegarrett8109
      @jakegarrett8109 Před 5 lety +9

      billandyeng Yeah, it could even be like the temp gauge on my car (I'm not even sure if its tied into anything). It always shows "middle" after its warmed up. Whether that's gentle cruising or bashing gears 9k rpm and hearing the exhaust get so hot it makes strange noises (gurgles) and then you know its hot because you can't make it shoot flames out the tailpipes unless its been warmed up aggressively and the exhaust ignites the excess fuel.
      But it always shows "middle" like 3 minutes of sitting there... Never goes past it... What a useful gauge! I've heard they don't even move even when serious engine damage occurs and water is boiling out at 240-260 *F... I'll be putting in a real one so I know when its overheating (they are notorious for that, so its a real shame they don't have a real gauge to begin with).

    • @kern417
      @kern417 Před 5 lety +9

      A lot of manufacturers did that with their temp gauges because customers brought their cars in thinking something was wrong if it went up and down. So now most gauges just stay in the middle between 160F and 230F.
      Or it could be like this subaru I believe and some others, where it doesn't have a temp gauge anymore. That's how my BMW is. It just has a light to tell you when it's overheating.

    • @ptappola
      @ptappola Před 5 lety

      @@kern417 Same in my car, but it can be found from drive computer's debug menu. Not very user friendly solution, but I had to use it as coolant pressurisation is not very reliable so sometimes coolant boiled before fan turned on.

  • @NotOfThisWolrd
    @NotOfThisWolrd Před 5 lety +3

    Great video. Perhaps a point...always a good idea to check your owner manual to see when is the best time to check your engine oil level (i.e. when the car is cold, or warm, or a little bit after running). Weird, I know, but many different makes recommend different times to check.

  • @draxus1266
    @draxus1266 Před 5 lety +3

    Very simple yet significant video, basics that are necessary to regularly check or inspect.
    Also, please include that oil filter whenever you change engine oil.
    Thanks a lot EE! =]

  • @SuperMarioDiagnostics
    @SuperMarioDiagnostics Před 5 lety +366

    Don't forget to change out your muffler bearing 👍

    • @skylercolvin8119
      @skylercolvin8119 Před 5 lety +46

      And don't forget to rotate or change your piston return springs so you don't get metal flake in your oil

    • @BasuSatwik
      @BasuSatwik Před 5 lety +15

      Replace tail gasket every 50k miles

    • @Hagledesperado
      @Hagledesperado Před 5 lety +71

      At least twice a year you should also top up your blinker fluid.

    • @EdwinCristobal
      @EdwinCristobal Před 5 lety +19

      Also Dont forget to add gas to your car!!!! otherwise you might get stuck in the middle of nowhere

    • @jefferyjin5551
      @jefferyjin5551 Před 5 lety +37

      Replace the air in your tires with every oil change.

  • @faisalmuhammad6681
    @faisalmuhammad6681 Před 5 lety +50

    There are very few amazing channels on CZcams like this one

  • @camfratus8636
    @camfratus8636 Před 7 měsíci

    Thank you for spreading great common knowledge about car care and maintenance. My father passed when I was 22 and I wasn’t able to be taught these things about my future cars.

  • @vipanshu1970
    @vipanshu1970 Před rokem

    thank you so much. i am new driver and this video really gave me lots of things to check so that i can keep my c ar healthy and fine. thank you once again. more such videos on car engine and DIY stuff will be appreciated.

  • @WarrenGarabrandt
    @WarrenGarabrandt Před 5 lety +3

    Another thing you should check is the radiator cap. When the engine is cold, you can remove the cap and check for worn seals around it. A symptom of a worn out radiator cap is soft, squishable radiator hoses when the engine is warmed up fully. Your coolant system is pressurized when it is hot to raise the boiling point of your coolant and minimize evaporation. When your engine is warmed up (after driving it for a while), the radiator hoses should be fairly firm under that pressure. If they are soft and you can squeeze them to flatten them out substantially, then either the radiator cap is worn out, or you have a coolant leak that is letting the pressure out. DO NOT remove that radiator cap when the engine is warmed up, EVEN IF YOU THINK IT IS NOT PRESSURIZED. A very small amount of pressure (less than you could detect by squeezing a hose, for sure) could be raising the boiling point just enough to holding a portion of your coolant in a liquid state (like around cylinder walls or heads), and removing even that little bit of pressure by loosing the cap while hot could cause it to flash to steam. This will force a substantial amount of boiling liquid out of the radiator all over you instantly. Source: I've done it. NOT FUN. [edit: I do my best spell checking after clicking submit]

  • @tpcoachfix
    @tpcoachfix Před 5 lety +3

    Speaking of tires, could please discuss the date codes on a tire and why it's important to pay attention to it?
    I really like your videos.
    Great job.
    Thanks.

  • @bachmannmanuel1562
    @bachmannmanuel1562 Před 5 lety +1

    Love this Channel. i was a former mechanic (Chrysler, Jeep, Dodge) and im looking to go back to this job. God i missing to have dirty hands, hearing the engine noise, the smell aof new tires.....

  • @thephunnyjuan127
    @thephunnyjuan127 Před 5 lety

    Partnering with Progressive that’s great! Now we are seeing the progress! Good job!

  • @copethehagen
    @copethehagen Před 5 lety +14

    Could you do a video about how diesel emissions equipment work? Like diesel particulate filters, urea injection, and exhaust gas recirculation coolers. I feel like this equipment has changed the game for diesel and made them less reliable therefore not as economical of a purchase as they were in the past where you could get 500k miles out of the motor with only wear and tear up keep. I know heavy duty diesel is not your norm but I feel that the explanation is in your wheelhouse. Thank you. Engineering Explained.

  • @iCrimzon
    @iCrimzon Před 5 lety +168

    Teach BMW drivers how to use their blinkers in your next video

    • @Eduardo-mr7bj
      @Eduardo-mr7bj Před 4 lety +2

      Lmao true.

    • @emilepapillon2275
      @emilepapillon2275 Před 4 lety +7

      And teach pt cruisers and corolla drivers what blinkers mean. Or maybe tell them to stop looking at their phone while driving so they can notice my blinkers lmao
      - a BMW driver

    • @christophervanzetta
      @christophervanzetta Před 4 lety +2

      @@emilepapillon2275 I drive blindfolded without my lights at night time ;)

    • @arnoldmonk6381
      @arnoldmonk6381 Před 4 lety +7

      Where’s the dipstick on a BMW? Usually behind the steering wheel😀

    • @RichardKoper
      @RichardKoper Před 4 lety

      These days it's way more important to teach Audi drivers to use them properly, or more important; to use them @ at all!

  • @lazarusblackwell6988
    @lazarusblackwell6988 Před rokem +1

    THANKS FOR THE USEFUL VID MAN!!
    YOUR VID IS AMONG THE BETTER ONES ON TUBE!

  • @coolkitty2075
    @coolkitty2075 Před rokem

    I m starting a mechanics course this video has helped my knowledge and confidence 👍

  • @lask7117
    @lask7117 Před 5 lety +20

    Just to note that brake fluid does not require topping up. The fluid will go down as the brakes wear and the pistons sit further in the calipers. The only other reason the fluid would drop is you have a leak needs servicing.

    • @Ben_Lorentz
      @Ben_Lorentz Před 3 lety +2

      I know people never think to check the pads and rotors when the fluid is low.

  • @davinp
    @davinp Před 5 lety +5

    No matter what make of car you have, the key to keep it running well is preventative maintenance. By doing inspections you can catch something before it turns into a major and expensive repair

  • @the___truth8038
    @the___truth8038 Před 5 lety +1

    I love my car, so i appreciate your uploads, thanks. :)

  • @yauyuso
    @yauyuso Před 4 lety +1

    I like how simple you've kept it.

  • @VinnyXL420
    @VinnyXL420 Před 5 lety +17

    Very nice indepth guide! A must see for a beginner. Great job greg! getting more people back into DIY is important stuff

    • @craystuff9390
      @craystuff9390 Před 5 lety

      Shlomi Vinny i started working on my car with no previous knowledge. First work i did was change the brake pads by myself and it was pretty easy except it was really dirty lol. Next im looking to install some new rotors. Some stuff i wont do by myself is engine stuff since i dont want to mess anything up, ill let a mechanic or the dealer deal with that

    • @VinnyXL420
      @VinnyXL420 Před 5 lety

      Great start!
      Although brake and suspension stuff should ALWAYS be checked out by a 3rd party (friend with knowledge\experience, mechanic, etc.), just like a 2nd opinion from a doctor, sometimes you miss something.
      Stay safe and always torque your nuts! :D

  • @Zain69z
    @Zain69z Před 2 lety +4

    i dont even own a car... yet im watching this

  • @TheKing-jy5jr
    @TheKing-jy5jr Před 5 lety

    Thank you for Educating the Public!

  • @astridnovicky7952
    @astridnovicky7952 Před 4 lety

    Thanks, great video :) I followed your checks and changed my airfilter.

  • @Catrik
    @Catrik Před 5 lety +49

    Tip for checking your lights. When you are parked in front of a building with large windows, you can usually see your car from the reflection.

  • @ag4allgood
    @ag4allgood Před 3 lety +5

    They should have this as a mandatory class in high school. Before you even get a Pink Slip to drive make this part of the Drivers Education Test to pass. Same with changing a flat tire. If you can't pass NO PINK SLIP.

  • @ryanbrunette3870
    @ryanbrunette3870 Před 5 lety

    This video was short and concise. Thank you for that. Don't see too many vids like this on youtube nowadays.

  • @rcguymike
    @rcguymike Před 5 lety +1

    I've used my phone to check my tie rod ends, control arm and trackbar bushings(solid axle vehicles) too. You could probably check U-joints too by switching between drive and reverse, but those are usually a bit more obvious.

  • @manfromnantucket9544
    @manfromnantucket9544 Před 5 lety +38

    Bounce off the limiter at least once per drive cycle (upon reaching operational temperature). Keeps your internals clean and happy. That's my advice

    • @EngineeringExplained
      @EngineeringExplained  Před 5 lety +50

      Haha, I’m actually working on a video about this!

    • @lukeiannello6190
      @lukeiannello6190 Před 5 lety +9

      @@EngineeringExplained the Italian tune-up? I've only heard about this recently, keen to know the science behind it!

    • @harris7695
      @harris7695 Před 5 lety +1

      Man from Nantucket and many smiles come along with that 😂

    • @TheSethxy
      @TheSethxy Před 5 lety +12

      Exactly, my grandma never goes above 2k rpm. It has super low miles and sits a lot, runs like crap.

    • @varolussalsanclar1163
      @varolussalsanclar1163 Před 5 lety +2

      Can u do it neutral tho?

  • @Oceansta
    @Oceansta Před 3 lety +3

    Literally everything he mentioned here is very easy to understand and to do and will save you A LOT of money spent at a workshop if you do it yourself even if you've never done it before. I learnt this the hard way :(

    • @posadist681
      @posadist681 Před 7 měsíci +1

      Me too I just started working on my car, even to change a battery they tried to rip me off

  • @stevenfrazer9423
    @stevenfrazer9423 Před rokem

    Excellent video!
    I am a mechanic and the one pollen/cabin filter I refuse to check are the older Mazdas as they are a pain in the backside to remove and replace. Unless it is dire I replace them but I charge out 30 minutes for is as the glove boxes need to be removed and the kick panel as well to get more access and even then it is in an awkward position to remove the screws for the cabin filter cover - all in all, a pain in the ass

  • @ShawnFX
    @ShawnFX Před 2 lety

    Just got my first car today, I want to take good care of it and have it for a long time :) thank you for this wonderful and detailed video!

  • @HumbleMechanic
    @HumbleMechanic Před 5 lety +419

    How To Make Your Car Last A Long Time - Checks payable to Engineering Explained will do just fine..

    • @BrandenMcNabb
      @BrandenMcNabb Před 5 lety +4

      I use Progressive Insurance.

    • @AHDBification
      @AHDBification Před 5 lety +6

      I'm still not sure. Should the dipstick read L or F? This is so complicated.

    • @rayzt3c425
      @rayzt3c425 Před 5 lety +14

      AHDBification depends on how you drive your car. fill to L if you drive on the left side of the road and to F if you drive in the front of the car.

    • @aundrayperkins9796
      @aundrayperkins9796 Před 5 lety +2

      no insurance suspended license. but I got 200,000 in the bank from savings on no insurance and not paying tickets😉

    • @louarmstrong6128
      @louarmstrong6128 Před 2 lety

      @@AHDBification F

  • @sethglenn9022
    @sethglenn9022 Před 5 lety +10

    Protip: Don't top off brake fluid during normal checks. The level between min and max is a rough indicator for the pad wear level.

    • @cartere9981
      @cartere9981 Před 5 měsíci

      Good tip, I just had to fill mine up from min to max and I was about to change my pads so will I now be “overfilled” if I replace the pads without taking some fluid out?

    • @sethglenn9022
      @sethglenn9022 Před 5 měsíci +1

      @@cartere9981 if you are changing the pads yourself, you can use a turkey baster to take some fluid out before performing the work. Worst that will happen if you don't, the brake fluid will overflow and run onto some paint. Brake fluid strips paint with ease and will cause rust.

  • @Bajinder0172
    @Bajinder0172 Před 3 lety

    Just logged in to like your video, great information. Respect man 🤟

  • @StankPlanks
    @StankPlanks Před 5 lety

    Thanks mate. You always post great vids.

  • @Gruntsworth
    @Gruntsworth Před 5 lety +24

    Check your tires. Ok... One...two...three....four... Yep, all there! Looks like everything is fine!

  • @x-man4702
    @x-man4702 Před 5 lety +22

    "Hello everyone AND welcome"

  • @lordnormington
    @lordnormington Před 5 lety +2

    Jason, your videos are so helpful and entertaining -- would you consider jumping on some mountain bikes to huck, flow, and send some trail, then suss out the physics of it all? There's design and engineering of the bicycles and components in a spectrum of trail conditions that is totally glossed over by the cycling crowd. Your approach would be a revelation for knowledge hungry dirt surfers.

  • @victorwilliams4403
    @victorwilliams4403 Před 5 měsíci

    Great video. Simple, short, and clear.

  • @Ty4ons
    @Ty4ons Před 5 lety +4

    An easy way to test brake lights is to place some long-ish object (I use a snow brush) between the seat and brake pedal and move the seat forward to jam it in.

  • @vincentsfuntimeworld5007
    @vincentsfuntimeworld5007 Před 5 lety +65

    also if you want your car to last, drive sensibly.

    • @faisal3398
      @faisal3398 Před 5 lety +7

      I guess that means my cars won't be reliable.

    • @EB-dr4dd
      @EB-dr4dd Před 5 lety +3

      Sensible whatever that means. “Same as saying don’t work out you could hurt yourself.”

    • @craystuff9390
      @craystuff9390 Před 5 lety +12

      E85 13B no. Thats a bad analogy. The correct one would be if not running the car in a long time
      You dont workout= bad
      You dont run the car= bad
      Working out pretty often =good
      Running the car pretty often= bad
      Working out too hard with no breaks= bad
      Driving super agressive in higher rpms = bad
      Theres a balance to everything
      If you drive agressive all the time i feel bad for your car. Once a while wont do damage

    • @MaxiiBoii23
      @MaxiiBoii23 Před 5 lety +3

      YUCK I can imagine the carbon buildup in the engine.... REV IT UP

    • @haydenhembree7015
      @haydenhembree7015 Před 4 lety

      E85 13B your car doesn’t recover and get stronger after you do a hard pull lol

  • @Brownyman
    @Brownyman Před 5 lety

    Checking your piston return springs is a bit more difficult but really worth the effort!

  • @garmzai
    @garmzai Před 5 lety +8

    5:55 and finally you wanna make sure to check your blinker fluid level

  • @RobWhittlestone
    @RobWhittlestone Před 5 lety +7

    ChrisFix says to check your Blinker Fluid

  • @leewensheng454
    @leewensheng454 Před 5 lety

    Thanks for the guides. It's useful for my new honda city.

  • @riflebear1711
    @riflebear1711 Před 7 měsíci

    Great audio, and lighting. Thanks man.

  • @lukescheu9566
    @lukescheu9566 Před 5 lety +71

    How high should my oil level be if I upgraded to a short throw dipstick?

    • @EngineeringExplained
      @EngineeringExplained  Před 5 lety +33

      Solid mod! 😂

    • @Dcc357
      @Dcc357 Před 5 lety +17

      Oil has to be filled until it overflows from the valve cover. This allows you to do an oil pump delete for friction reduction.

    • @geoffreyanderson4719
      @geoffreyanderson4719 Před 5 lety +1

      You might be the short throw dipstick.

    • @gregblack8550
      @gregblack8550 Před 5 lety

      Named after you

  • @nickmendens76
    @nickmendens76 Před 5 lety +8

    You had me at millimetres!

  • @Amedeus1756
    @Amedeus1756 Před 3 lety

    Thanks for the tip about checking your tail lights with the camera phone I always used mirrors or a friend, using the phone never crossed my mind.

  • @chenpeng22
    @chenpeng22 Před 4 lety

    The video is very useful. I have a Subaru Forester in China, where our warranty is very strict and the 4S shop is very expensive to repair. There are too many counterfeit motor oils or accessories in China, so it is too difficult to pick. Thank you very much for your video, I can learn a lot.

  • @Sonickrunch
    @Sonickrunch Před 5 lety +5

    Only thing I’d add is to shake each tire if you get it off the ground. It shouldn’t have much play. If it does that indicates some problems with your suspension parts(control arm, tie rod ends, etc)