Audi/Volkswagen EPC Light On At Low 1500 Rpm! Engine Shakes & Rough Idle.Case Study Fixed Problem
Vložit
- čas přidán 9. 06. 2022
- Here the Playlist injoy Audi A5/A6 3.2L Engine (Interminal coolant leaks Diagnose & Replace): • Audi A5/A6 3.2L Engine...
#automotive #cars #car #auto #carsofinstagram #carlifestyle #carporn #bmw #automotivephotography #instacar #carphotography #carswithoutlimits #photography #instacars #automobile #supercars #cargram #supercar #audi #ford #porsche#focused #mechanic #repair #utorepair #technician #carrepair #cars #car #wrench #wrenchlife #toyota #racing #carstagram #mercedes #carlovers #mechanic #s #luxury #diy #ferrari #turbo #carspotting #v #luxurycars #jdm #amazingcars #carcare #honda #autorepair #f #r #motorsport #bhfyp #engine #classiccars #autodetailing #volkswagen #carinstagram #instagood #mk #design #drive #detailing #sportscar #x #amg #otomotif #mercedesbenz #vehicle #technicalskills #automotiveindustry #womeninautomotive #womenwhowrench #womenintrades #womenwhobuild #womenempowerment #women #yesican #bethechangeyouwanttosee #panelbeatersunited #panelbeater #automotive #autobodywork #collision #autobodylife #garage #collisionrepair #automechanic #snapon #autorepair #automotive #auto #mechanic #car #cars #carrepair #autoshop #autoservice #repair #collisionrepair #autobody #autorepairshop #oilchange #autobodyshop #autoparts #bodyshop #carcare #mechaniclife #autobodyrepair #bmw #carservice #brakes #carsofinstagram #automechanic #collision #automotiverepair #tires #autorecycling #service #garage #carmaintenance #mechanics #engine #autodetailing #toyota #junkyard #audi #autorepairs #usedautoparts #vehicles #maintenance #mercedes #carrepairs #autopart #carparts #salvageyard #partsforsale #honda #partsforcars #autocare #performance #autowrecking #usedparts #ford #towing #dentrepair #salvage #mechanical #tools - Auta a dopravní prostředky
Appreciated bro well-done good job
keep it continue
Thank you, I will
I was looking forward the driving test I have the same problem on my 2012 Audi A4 change spark plugs an cylinder coils but p302 keeps coming on
P302 what is that mean?
Im wondering if this fix the problem and I couldn’t find the part 2 .
Blows my mind that the EPC light comes on for pretty much anything, isn't that what the damn CEL is for?
Yap same light as Engine light
hello..i have same issue..just want to confirm with you,when this P0016 failed,your car become hard smoke or not?
Hello, i have a Audi S8 from 2015. We did a valve cover gasket put everything back. Now it makes a metallic noise, I got check engine light 4000 rpm warning light on. Can high fuel pressure cause this noise and these lights ? Or maybe cam follower ?? It’s driving me crazy
Have you found
I’ve changed just the camshaft position sensor and I’m experiencing the same issue. Do you think that if I need to do what you did in order to fix the EPC light from coming back on and for the car not to idle? Also where did you get these parts and tools?
Not sure give it a try. I got the part from the Dealer
I got the tools from Amazon.com
Did you change it, did it fix the problem?
It's your balanceshaft
For me, it was a bad intake camshaft vvt gear. I replaced It with another intake cam. While you're in there, change the oil cooler gasket. If it fails, you will get coolant mixed with oil destroying your new cam. Don't ask me how I know 😅
Gotta do those oil changes regularly with these German cars. Sludge will cause all kinds of craziness with these cars. I’m kind of becoming an expert with my daughter car lol
Would you say it's just needs a new oil change? I'm having this issue too and I haven't gotten an oil change and its already past 10k miles
@@MrSamoannn Check the variable valve timing Solenoid. If the little magnetic part is sticking replace it. It should fall in and out with ease
@@JJJobson turns out it was my spark plugs and coils. Had to get them replaced today 🥲. They were fried
@@MrSamoannn WoW, how much was 4 coils? I did my daughters spark plugs but not coils. It was a booger getting those boots out. The problem was the vvt solenoid but I went ahead and did plugs just bc they were probably original by the looks of them. Glad you got it fixed
@@JJJobson It costed me 930 for all spark plugs and coils. That was my local mechanic while Audi charged me close to 2k for it. And yes sir I am happy
So what’s the point of replacing the cam bracket? Maybe I missed that part but I am also having the same problem on my mk6 gti in first and reverse and I can’t seem to figure it out.
I purchased this cam bracket from Amazon and its defective, so i put the original one back on
I replace the Camshaft bridge Original & purchased a new oil actuator valve
Why did u replace cambridge in the first place? And then reuse old oem
Salutations this side from South Africa I really appreciate alot my problem is solved and car is fixed
how did you solve the problem?
I changed the cam bridge as per the instructions on the video and voila problem gone
Good work. Please share and subscribe for more contents
My Leon FR is doing the exact same thing CCZB engine code, only does it when low RPM and when oil it at correct temperature, also makes a rattle sound when you come off the throttle.
Mine does the same. Did you fix it yet?
@@benXtrans turned out to be chain tensioner I left it a couple miles too long and car started misfiring and timing is now out so I suspect it’s slipped a tooth or 2, I still have the car not drove it since I posted this comment or a day or so more lol
Haha, i don't want to think its that because I just changed the whole timing chain set a few months ago
@@pommyrock
@@benXtrans you check the solenoid ?
@@pommyrock mechanic is working on it as we speak im at work.. already changed the magnet... so hoping the valve fixes the issue
Pulling the cambridge off doesn't shift the Cams or jump timing?
No it doesn't
Please i want to buy same car with same engine, is it good, how to check if the engine is good? I heared its bad engine bcz of it's oil consumption?
Before you buy one this kind a engine, make sure to check and look at the server schedule, ask for what been done and worked on. Check the time chain noise see if its been replace or not, check under the engine for oil leaks or coolant leaks. Good luck
To check the timing chain remove the plastic black cover on top of the timing chain for inspection .
What's the part numbers and where did you purchased?
I got it At the Volkswagen dealer it was cheaper compare to Audi
What brand recommendations for Cambridge?
Oem save you a headache later on
Hey, good night, i was watching your video and i was looking for the test drive video…. Did you fix it?
Here the playlist of this build
Audi A4 Turbo 2.0T 2004-14 Engine Rebuild & Swap: czcams.com/play/PLYcI2lvoAa5dz0M79_LuraIAyrKtEwKzz.html
Update: I dont have the final video im sorry it drove nice idle quite and ride awesome after a week later another Audi owner show up and purchased this amazing car after i upload this video. 😀
I replace the Camshaft bridge & purchased a new oil actuator valve save me a headache
Do u think the issue was the cam bridge? Or the solenoid?!
I replace the Camshaft bridge & purchased a new oil actuator valve . Save me a headache
I replace the Camshaft bridge & purchased a new oil actuator valve save me a headache
@@jfGarage4kdoes the oil actuator valve come with the bridge or is it a separate part?
La falla fue p000A o p0011?
I have a Audi q 5 it does this the Epc light comes on and then sometimes has a little problem starting it just keeps trying to start off on I have to press in the accelerator and it starts or just starts normal when it does not start normally it will idle little hard but once I get going it’s smooth the Epc light comes on between 48 mph and lower 😢 and does a small jerk .. this video came up while I was driving and think my car connected to my phone to tell me what was wrong lol
Is the engine light on by chance? Check your spark plugs when was the spark plugs been replace?
@@jfGarage4k I changed the cam shaft position er I was also thinking what about the crankshaft pos sensor
Did u solve this? I have the same problem..
Yap
@@jfGarage4kwas it the crankshaft?
Hello, mine does the same but only when it is very hot, what could it be?
worn camshaft adjuster or solenoid valve can lose pressure on high temperature because oil is thinner at hot
Does yours do a rattle when pulling off the throttle also ?
@@pommyrock hola tengo el mismo problema ruido y epc a bajas rpm , árbol de levas nuevo , tapa nueva puente de levas nuevo y distribución . No cambie selenios y válvula aun
Is the problem fix now?
Ya its fixed and daily driving it now.
czcams.com/play/PLYcI2lvoAa5dz0M79_LuraIAyrKtEwKzz.html
@@jfGarage4k what was the problem
Some vehicles have different problem but same symptoms are same in this case my problem was the Cam bridge
I have EPC on please assist
Did the car ever turn off on you ?
Ya it shutdown on me while driving
Mine does.
Hello, what was the fix for the engine stalling out while accelerating. I have the same issue it driving me crazy
Does the car does this after oil tem is like 90c+190F+
I have this problem after the warmup. any idea whatnit is?
Check Cam bridge make sure the oil screen not blown off or Plugged.
Cam actuator Solenoid been replace? This might be your problem
@@geeess958you fix it?
same as mine, in high temperatures, it does , you fix it?
What faults
Vvt oil solenoid & Cam bridge
Hi
Check the Discreption for the Full Playlist Videos
Will this cause ours not to start
Hmmm what was the code that came up?
@@jfGarage4k p0341 and p068A-00. Car died on the highway. Will only crank now with a boost and won’t start. Something went bad.
@@tylerseabook9423 A5 is doing the exact same thing
@@danielbanks8606 our engine is shot. Complete garbage design of a car. Will never own another one.
I have change my alternator and I still get the epc light on
Scan the light see what codes come up
Sell it to me pleeeeaaseeee I could use it
I had the same issue I replaced the bridge and removed the new screen on the new bridge
Did it fix the issue?
@@jfGarage4k yep it did
Im glad to hear. Awesome work
@@damnitdanielsondid you experience ball and spring falling in, I fear the screen may have blown out for mine but just had someone stat the ball and spring fell into the lower timing portion
@@jameshinged3002 luckily for me it was just the screen, if the ball has come out of yours I would definitely try to dig around to find it
Update problem fixed no Engine light came back 👍 Cam Bridge and Vvt Valve was replaced
What was the issue?? I am having the same issue
If you watch the video 10:00 i replace the part and it solved the problem
You have a video of the flend results?
It does it from the beginning when it is cold or only when it is already at temperature??
@@jfGarage4kcould you tell me problem in the camshaft bridge or the valve actuator?
I already fixed the cam sensor
Awesome glad you got it fix
I have this exact problem at times. My car can just cut off power. But once I start her up again. She drives just fine. Am really looking forward to the drive test and getting to see the final results did this fix the epc light and and power lag problem for you sir. I am interested to know the final result.
I add more info Check the discreption playlist link for this D.i.y.
I have the same symptoms as your video, I have replaced the parts you indicate but the symptoms still continue
May i ask what part did you replace on your vehicle
Camshaft bridge, the same of this video
What about the vvt valve
So is your problem fixed now? What was the problem in the end?
You wont believe what i found, Here my playlist for the Audi A4 czcams.com/play/PLYcI2lvoAa5dz0M79_LuraIAyrKtEwKzz.html
I replace the Camshaft bridge & purchased a new oil actuator valve save me a headache
Hello, Thanks for the video, I have 2013 Quattro 2.0 tfsi and sometimes I have issue with iddle, it is not stable(on cluster RPM is stable). Do you know what the issue might be?
czcams.com/users/shortsdHzqmXGxAcg
I do not have that issue always, sometimes some reason, I have that, than I go home, car cools down, after that no issue.
Start by cleaning the inside throttle body
@@jfGarage4kThank you so much for the answer, if I touch the butterfly valve by hand while cleaning, can it harm the throttle body? and after cleaning, should I do adaptation?
No. Just use a intake cleaner spray and a clean towel, best result try seafoam cleaner ( it cleans the throttle, intake and the valves)
U did not even fix the problem
Yes we did fixed it! Check the discreption below for following videos and people comments really good ideas helps alot