小飛象遙控器ddf 350固件升級視頻帶定速巡航How to upgrade the firmware of Dumborc ddf 350 transmitter cruise control
Vložit
- čas přidán 10. 12. 2023
- 可以訪問小飛象官網,下載最新的固件。2023年12月份後的遙控器,均自帶有定速巡航功能。
With cruise control function #ddf350 #dumborc #transmitter #rchobby #rctransmitter
固件下载地址:www.dumborc.com/?page_id=930
Firmware download link:www.dumborc.com/?page_id=930
固件更新过程中,遥控器电池仓里面不要放电池!!!!!!!!
During the firmware update process, no battery should be placed in the transmitter battery compartment!!!!!!!!!!!! - Jak na to + styl
Спасибо вам огромное. Это самое информативное видео что я только смог найти по этой теме! 😀
Если ещё сделаете виде со ссылкой на инструкцию - будет просто класс!
Я рад, что тебе понравилось видео
С субтитрами, с помощью переводчика, должно быть хорошо понято содержание видео.
In English would help as most country’s speak even just a bit of English
Need these videos in English as well. Also need the updates in the English version of the website. I had to use the translate software in my computer to find the new software.
Just use the translator and follow what he's doing. Where's the problem?
i hope it has english sub.. very informative
this transmitter, connects to the computer via usb, to play a simulator?
Can you please make a English version of this 😊
Hi guys,
My receivers don't seem to match a certain gyro I want to use on my drift RC car.
Maybe you'd know of a different receiver I could use to match the PWM frequency of my high end gyro (333hz).
I'm using a x6fg receiver and even after trying multiple ones it still doesn't steer even if the gyro itself can move the servo just fine.
I haven't yet tried a x6dc, x6yc or x10fg.
If you can find a solution to my problem I'd be greatly grateful.
Cheers
I lost everything can't even use my radio now ugh
What happened? Did you solve it?
How can i plug leds lights of my rc car to x10fg receiver?
You can plug the light into the led port in the upper left corner, and use CH3 to control it on and off. Remember to series a voltage resistor in case the led lights burn out.
Can I downgrade firmware from 1.1.1 back to 1.0.9? I think there is the problem after upgrade firmware. Sometimes signal losses to receiver but in range of 5-10 metres.
Of course you can downgrade.
Instructions in english or with subtitles please?
yes,with subtitles.
@@easthobbyThere’s no English subtitles.
It doesn't work!Update failed and transmitter won't boot up anymore!Don't update this.
If the previous version is a new version after 1.0.9, you only need to download the new firmware, decompress it, and run the decompressed batch file directly, without copying it to the USB drive.