Russian phone dialler using interesting magnetic memory tech
Vložit
- čas přidán 27. 12. 2021
- Russian "Trill-2" phone dialler using the same magnetic memory tech as used on the Apollo flight computer.
Schematic here : electricstuff.co.uk/trill2.pdf
mikeselectricstuff merchandise : mikeselectricstuff.creator-sp... - Věda a technologie
Before anyone else comments, yes it will be heading to Sam ( Look Mum No Computer)
was just about to comment... :P
hey up it is very intriguing indeed thanks a lot mike!!, for anyone interested it will be available to be seen at this museum is (not) obsolete. :).
and ill be dropping something else off for mike to pull to pieces!!!
@@LOOKMUMNOCOMPUTER Proper job Sam! Cheers!
I wasn't guessing rope memory, that's hilarious and kinda great!
К155 chips are TTL, equivalent to 74 series (not 74S or 74LS yet). 74LS would be К555, and 74S would be К533.
ЛА1, ЛА3, ЛА7, ЛА8 are different configurations of NAND gate with open collector output.
ТМ2 is a dual D-flipflop, equivalent of 74x74.
Russian word for "firmware" and process of updating/flashing a firmware to this day is "прошивка" - "sewing in", exactly for this memory type.
And Soviet philips-like screws were notoriously shittty because lack of real standartisation, wrong alloys, bad manufacturing a were basically only used once. You may even call them anti-tampering screws.
Proper machinery and electronics only used flat-drive screws.
Oh hell this needs to end up in the ‘This museum is not Obsolete’ along with the rest of telephone stuffs, even if it’s just a loan.
YES!
During childhood and school years seen these in my parent workplaces and in other Soviet offices. Knew that these devices are related to dialing, but didn't knew in detail. Thanks about explaining.
How about donating it to Look Mum No Computer on CZcams? He has a small museum and might be interested in displaying it.
This looks like something "Look mum no computer" may enjoy.
you are not wrong haha
@@LOOKMUMNOCOMPUTER Sam!! you should contact Mike for more information! :)
Came to the comments to make sure LMNC had spotted it! Right up his street!
The logic chips are 7474, 7400, 7401, 7422 (none of that 74LSxx rubbish). The transistors are indeed germanium, and quite obsolete for '85 (МП25). In fact the entire design appears to be based on what was available back in ~1975 in Soviet Union.
just what I was thinling
This is how ANI-B used to work in the US; which was used when your local phone switch needed to obtain your phone number and send it forward (as tones) to a centralized billing system (e.g. CAMA). They ran your physical phone line through a series of rungs corresponding to the last 4 or 5 digits of your telephone number; and when your switch connected to the accounting system trunk, a polarity reversal triggered your local switch's register/sender to bring in the ANI-B system, apply a high frequency tone to your line, and detect which digits (in which positions) to register in the marker [IIRC].
These weird mega-jumbo magnetic rings were standard issue in Russian military equipment. That is how they stored parameters in the tube-based missile controller I was fiddling with while in Finnish Army in 1970s.
в приборе много деталей из 70
Probably also quite relieable in harsh conditions 🤔
Have an even older Japanese version that can handle 20 stored numbers of up to 12 digits, using figure 8 shaped ferrite cores, and all discrete transistor logic inside.
It works by running a single sense wire through all the cores in a row, and then generating a current pulse through the digit wire, and having a counter generating the dial pulses, running through the pulses till the sense wire for a digit stops the count. End of number is another core, that does an inhibit of dialling before the first pulse is created, unless you are using all 12 numbers, which automatically does the inhibit on the end of the last digit. Was used for many years in a pharmacy to call suppliers, storing all the common numbers for them, so the pharmacist did not have to look up the numbers, instead having memorised which button was the desired one.
Press the button and press start, and wait for the speaker to have the ringing tone, or a busy tone, and then, if busy, you pressed reset, which dropped the line, or picked up the phone, which also reset the device, but also connected you to the line as if the device was not present.
Old, dates from the 1970's, and all very crusty inside as well, but a fascinating bit of by now very crusty yellowed beige plastic and old SRBP board, with dozens of small separate soldered in daughter boards, some potted, some not, and not an IC anywhere in sight in it. All boards are tinned copper traces.
I dismantled lots of Soviet equipment in early 90s. I'd say this design is somewhat 70s not 80s because of transistor choice. In 80s they would've used KT315/KT361: silicon BJTs and way more compact.
I never expected a dialer to use DIY rope memory programming but now that I've seen this it's actually a really clever implementation, for sure cheaper and way more reliable than the cheapest option for adding digital programmable memory back when it was made. Many thanks for making the video! The weirder the technology and product you take apart, the better the videos!
As a fellow light art installation/hacker I obviously love all your LED related posts - especially since you're doing such large scale installations, but one of my favourite videos is the RAF Sepecat Jaguar gyro. The level of engineering in those gyros are some next level stuff...
Also - love your tea cup! :D
Неожиданно) спасибо за обзор, я прям вспомнил детство, МП39-МП42, к155ла3, схемы в инструкции, все такое родное)
в том и странность что германий вместо кт315, хотя в перемешку со 155
When you could trust your users weren't dummies!
Brilliant solution given the tech constraints they had. I'm impressed.
Such a unique design, you would not expect core memory in this kind of device.
The engineer did a great job bringing his idea to life.
You're right about those chips being 7400 equivalent. There's a fantastic Wikipedia article for the Soviet IC designations: en.wikipedia.org/wiki/Soviet_integrated_circuit_designation - the last digit usually refers to variants of the same logic type.
On there I can see К155ЛА3 and К155ЛА8 (2-input NAND gates with two different pinouts), К155ЛА1 and К155ЛА7 (4-input NAND and a later production version), and the К155ТМ2 is a D-type flip-flop. Be careful when you search for these because "К" is not the same as the Roman character "K", and "ТМ" is not the same as the the Roman characters "TM", even though they look very similar! (and quite literally identical on CZcams's font)
This would be a perfect fit for "This Museum Is (Not) Obsolete" museum!
I was just about to comment the same myself!
I really someone involved in the original design sees this and leaves a comment.
The Soviets always seem to have found a way to solve a problem, often with limited resources and generally very reliable solution as well.
The original design appears to be going back to 1970s, according to the choice of components.
It’s videos like this that make me wish CZcams had something stronger than thumbs up. This is awesome!
Came from Look Mum No Computer. Both are very fascinating vids! Thanks for getting into more of the metal. I loved hearing about it and seeing this clever tech~
u could hook a bunch of xmas lights to it and use the number storage to create different patterns
Love this! Reminds me of the "Tormat" memory used in Seeburg Jukeboxes to remember the song selections. Tormat = toroid matrix.
Look Mum No Computer would love to have this. He actually has the equipment to use it.
Rope memory relay sequencer?
For the first time I actually understand how these cores work. Rather ingenious, actually.
I finally understand how the magnetic core memory worked .. I used to think a lot more magic goes in this
This is the ROM, the RAM is where the true magic begins to unfold :)
Спасибо автору за рассказ, как-то раньше не попадались такие девайсы. Посмотрел, оказывается были и Трель-1, и Трель-3.
Я только видел рекламу в журнале Радио.
Imagine having to "program" these in an office environment 😱
Imagine Karen programming it.
@@electronbox 😂😂 That would triple the time doing it
Your teardowns are the best.
So many interesting devices that you get your hands on.
The descriptions are quite accurate unlike others.
Your pace is quick yet thorough, you don't waste time to teach basic electronics that
everyone knows. It is good that you skip the unscrewing parts
Much appreciated.
when you said core rope memory i imagined some kind of way for you to program the numbers in electrically, i was not expecting instructions on literally wiring the number in by hand in this way, very interesting
On the Apollo computer you will see videos of workers sewing the ROM, which is mind boggling. Every release required the rope memory to be updated.
The PCB material is actually the usual fiberglass soaked in epoxy. What gives it papery feel is the glue that was used to attach the foil that was etched out. And of course having no solder mask is an absolute soviet tradition.
Still to current days.
@@pashko90 still to current days what? :) FR4 as PCB substrate of lack of soldering mask?
@@thelittlebigoneru Some army pcbs i seen without a soldering mask.
@@pashko90 probably, it was transparent mask, it is used to enable visual check of condition of copper layer. Copper, exposed to ambient air, is strictly prohibited by regulations and can't pass military QA, not in soviet era, not today.
This is one fantastic Forgotten Machine! Thanks so much for preserving it and showing it to us!!!!
Handy for those times where you have to call 40 people at the Politburo to get authorisation to requisition a new potato peeler.
The shift bank is the peoples’ bank. ✊
lol! it is particularly funny if you know the subsequent fate of this potato peeler.
When I was a kid I found something similar at a charity shop but it was an electro-mechanical version. It had a plastic film that was driven by a small motor over sprockets. On one side was a sliding pickup with two contacts that rode on the film. You slid it up and down to select the number to dial, then pressed a button to start the film drive. On the film were places to fill in squares with a conductive pencil to "program" the numbers to dial. To dial a three you filled in three squares, etc. As the conductive squares passed over the contacts, it shorted them performing pulse dialing.
My grandfather had one of those. In the late 1970s. It basically was like filling in a scantron test. And as you say instead of writing a 1 or a 3, you filled in consecutive squares. You could hear it go click click click as it dialed. It ran the pulses out at 10/s just like a dial.
Essentially that system didn't store the numbers at all. It didn't even have any idea what it was dialing.
It even looked like this unit in general shape, with the belt on the left where the cores are here. And you have to life the cover to program it like on this, but of course you did it differently. You wrote in the name of the person associated with the number on a piece of paper which was covered by a clear part of the cover when you closed it.
The best was erasable, but I wouldn't push it as it never got completely clean.
I can't remember who made it now.
i guess you could also use a photo transitor to detect the pencil marks
Really interesting, love soviet electronics, I used to repair those little Regonda M, TV sets in the 80s, those top hat transistors are awesome.
Hi Mike, give to Sam to connect to his Strowger PBX. He may well turn it in to a programmable music sequencer too.
DO IT MIKE!!!
This smells a lot more like an array of very small current transformers than actual core memory to me.
There is core rope ROM (this) and core RAM. Entirely different concepts. Both used in Apollo craft.
Happy New Year and thanks for showing how this worked. It give an idea on how a person could make some memory for a science fair or classroom demonstration.
Это не "магнитная память". Это "магнитный дешифратор", позволяющий простой протяжкой провода сквозь кольца задавать набираемые цифры. В последующих реализациях данный узел заменялся в начале рядом "джамперов", а потом вообще всё перенесли в "микроконтроллер"(580ВМ80)
While this is not an example of "core memory", where information is stored in the magnetization of the cores that can be changed (RAM), this device does make use of a "rope memory" much like the ROM that was used in early computer applications for permanently storing (or "encoding", if you prefer) programs and data.
Хотя это не пример «основной памяти», где информация хранится в намагничивании сердечников, которые могут быть изменены (ОЗУ), в этих устройствах действительно используется «веревочная память», как и в ПЗУ, которое использовалось в ранние годы. компьютерные приложения для постоянного хранения (или «кодирования») программ и данных.
ВМ80 -- значился как процессор, а не контроллер, и требовал немало обвязки.
@@Ma_X64 "немало" - для реализации "компьютера". Для работы в роли "контроллера" - не так уж и много. Могу напомнить, что большинство первых АОНов было собрано либо на ВМ80, либо на его "аналоге" Z80. В общей сложности АОН содержал "аж" восемь корпусов микросхем ;) И имел приличный функционал как для самого АОНа, так и в роли "звонильщика"(если память не врёт - до 128 номеров в "записной книжке" с произвольной выборкой и любым временем дозвона).
Чуть попозжа, когда в "наш" мир пришёл прогресс - многие открыли для себя контроллер С51(8051) - кол-во корпусов микросхем в АОНах разительно сократилось.
@@chveyk если что, контроллер это по определению процессор+периферия в одном корпусе. И дело тут вообще не в вычислительной мощности.
@@chveyk ВМ80 никак не аналог Z80, ВМ80 аналог говнопроца от интела i80, Z80 имел и частоту больше, и доп инструкции, и работал чуть по другому для более удобного программирования
I just love the look of those transistors. A work of art in itself.
if you file the cap off they become phototransistors
Comrade, almost or probably everything that he has touched was produced in a single country in full cycle: from instruction manual to ICs.
@@pvladi I've got a pile of 2N3055 for that :)
I believe the thing was designed in 1970s and produced so long just because of planned economy. I have 1980s "Виза-32" (Visa-32) which obviously was more modern design and also massively produced at same time. It uses RAM ICs for storing data. But of course if your AC power fails and you forgot to check and replace backup battery before then... well, you just need to program everything again☻
Incredible! Few ferrite cores, tranzistors and TTL chips, and they made ~1kB of memory with their logic function. Simple, clever, a little bit hard to use, but you do it once. As a reward you can feel like 60'-70' computer science doctor.
Cool tech, amazing it still works. Thank you for sharing!
Nice. Fascinating to see rope core memory. I was expecting complex and hard to use system, but actually this is pretty easy implementation, and very easy to program.
I worked with some Bulgarian engineers in the 1980s (here in the UK), each engineer was accompanied by a party member (veiled threat!). They were brilliant (nearly as bright as Michael here :), but held back by inferior technology and political structure! Electronic/trade mags would go missing, and I was asked if I were able to get them something?! After careful and worryingly listening, I discovered it was - record styluses, phew. Back home, they used them as currency? Very sad to experience these brilliant people being paid and respected so lowly. My wife and I accompanied them (on the firm) to nights out in London town - they were completely and overwhelmingly gob-smacked :) Such delicious decadence :) It wasn't long before 'the wall' came down :) A happy, healthy and prosperous new year to you.
True.
Getting a record stylus back then in eastern bloc - pure unobtainium.
"look mum no computer" would love this
You know he acquired it from Mike and now has a few videos about it.
@@Enigma758 😮
love that this required careful thinking just to program the numbers! Fascinating bit of tech!
Awesome, thanks for the upload :)
That was the simplest and clearest illustration of how core memory works that I've ever seen. Thanks Mike!
Note - this isn't core memory like RAM, it's Core rope memory, a type of ROM.
@@djmips Fair point, but still illustrates the point well. I know there's a flux-shift element to the RAM, which makes a good deal more sense with this primer.
I've seen magnetic core memory before but didn't know about this type of read-only programmable memory. It's fascinating! I arrived here from Sam's video - when he mentioned you it was a surprise because we met at Gaussfest recently. I don't know why I haven't been subscribed to your channel since then, but that''s remedied now. Thanks for this.
Yeah magnetic RAM would work, but back to needing a processor again to read and rewrite it.
Simple and beautiful. Thank you for this video.
That is just amazing. Its also amazing that it has a schematic and PCB layout.
Great Video! But could you please upload a scan of the manual too? Didnt find it on the Internet, i also have the same machine.
This was a lot easier to understand than I thought it would be. It's such a simple and smart way of doing it.
Приставка телефонная "Трель-2" выпускалась предположительно с 1983 года. Служит для запоминания и автоматического набора любого из 40 номеров АТС.
The telephone prefix "Trel-2" has been produced presumably since 1983. Serves for memorizing and automatic dialing of any of 40 PBX numbers.
Prefix - это приставка к слову (грамматика).
Здесь правильное слово appliance.
83? Помоему с начала 70х
That is super fascinating. I love it!
Absolutely beautiful, what a piece of art and history.
I've always wanted one of these. They're are a bunch on ebay at the moment. Nice to see one taken apart.
Thanks Mike, Neat item. Sure got my brain stirring following your great analysis. Also remembering old 60's core memory boards and shipboard magnetic amplifiers for winch control.
Amazing! I'd be interested in more soviet era comparisons in tech. I've never seen anything like this before.
Did you know that in the 80's soviets made their own computer called "kilobyte" and all of the chips inside were clones.
The main board was also 10 layer!
Amazing, thank you for exploring that for us! What a clever bit of engineering!
This is from the sad era of the Soviet shortage of jumper links.
Fascinating! Thanks for sharing this with us. Love the old Cold War era tech.
The No 5 Crossbar Switch used a similar scheme in a device called a ring translator used for billing. I wired those when I worked the frame in my early telephone days.
Was going to announce that core rope isn’t storing anyone’s phone numbers until I see the thing almost sent as a kit you have to weave the damn thing yourself haha top stuff :D not too dissimilar from old ham radio VHF that had the user wire a diode matrix for their channel selection.
That's weird and amazing at the same time. Crazy how behind that tech was for the time, but it worked!
Absolutely amazing. Thanks.
Some thoughts:
I’m really enjoying reading translations of some of the Russian comments on this video, the idioms, especially in an argument are quite funny
Also i was born after the age of pulse dialling, but since the phones of the time used actual dials, I imagine a device like this was a godsend for efficiency and not tearing your fingers up on a busy day like I’m told happened
I wonder how expensive this was at the time, it might be a cultural thing but I can imagine outside the office, housewives and families with things like this for their friends’ numbers
Checked the schematics:
Logic is different NANDs and D-triggers
"Interesting-looking capacitors" at 6:45 are thermistors.
There is also reed/magnetic switches there(don't quite get what for)
Bonus: 0.4434 g of gold (probably in diodes), 0.126 g of silver (contacts)
Reed switches are the reed relays for phone line interface
@@mikeselectricstuff thanks!
Do you by any chance know how this big white thing is named on PCB layout(I don't have it)? Judging that it's near a switch I suppose it's for alternative telephone exchange mode.
*open collector NAND.
>"Interesting-looking capacitors"
Looks like K53-7 niobium capacitor, though I'm not sure why it would be in this civilian product.
You're right, it's thermistor ММТ-4
Interesting tech. Thanks for the video.
Russians made fantastic steam irons i still have one from the early 80s in working order.
Quite amazing look at Soviet tech in 1985. Core memory was practical. Nice to see you have it working too!
it was VERY strange device even from standpoint of 1980 soviet electronics engineers :) kinda pun toward all of the rest of progressive humankind :) 😁
Трель-2, чего только не выпускали, только мало у кого такое было.
Кому было надо, сами паяли в радиокружке, вплоть до компьютеров
даже не знал о таком чуде, хотя и не надо было, телефон появился году в 2008.
но тут явно собрано из ненужных деталей. военное смешано с бытовыми 70 годы с 80.
при этом плата военная, значит делал военный завод из того что было.
для гражданки они бы взяли гетинакс
For me the most unusual thing is the crosshead style screw, all the screws I've seen in soviet kit were flathead with no exceptions!
There are cross thread screws, but they're for flat head screwdrivers. It's possible someone was in this before Mike.
@look mum no computer
might appreciate this
could use it to store notes
Yup he could connect it upto his phone system....
Absolutely fascinating. Mind blown.
My best guess - it would have allowed a secretary, to connect a military commander, to a number, with out them being knowing what the number is. Especially if the phone was screwed down to the base, with tamper proof screws.
Press the number and lift up the receiver once it started ringing to HQ :)
Likely as not, it would have been on the separate military phone network, hence only 7 digits needed.
I'm sure people back then knew that they could count the relay clicks to learn the number.
No, regular device for reception or secretary in relatively small organisation. 7-digit was maximum local phone number length in USSR (not counting region/town codes).
As a Russian-American, i seen a lot of stuff like so in person. A lot of army/military things are so interesting to take apart to see how things goes.
What a bizarre device. Programming in the full set of numbers must have been quite time consuming. Especially if you miss wired one of the first layers and only found out at the end. I would have thought that plug-in jumpers could have been a lot simpler.
In this case You need 560 jumpers with good contact
Perhaps one could just disconnect the ends and pull out the wire?
In the eyes of a telephony engineer, such a wiring configuration would hardly even be considered a trifle; a run of the mill patch panel could require 100 times as many wires.
Given the era, I’m inclined to believe that in many if not perhaps most cases the average end-user wasn’t configuring the device themselves, but perhaps I’m wrong.
With all due respect sir, clearly you know far more about circuits than I do.
But the pencil pointing at the old schematics was...making me nervous.
Thanks for your video! New Sub!
It's like explaining a Picasso hodling a glass of red wine.
Как трудно выговорить трель)
Fascinating! And to think my grandparents had issues programming phone numbers into their smartphones...
Fascinating bit of kit, 1 number for home and 39 for the Kremlin, love the mug you've got there ! Happy new year to you and and your's....cheers.
In era of transition from analogue to digital phone lines, digital centrals would by default emulate analogue. Star sign was then used to tell it to switch operations to digital mode where numbers could be dialed by tone.
One box to ring them all :) Nice cup by the way, Mike.
I *think* the Cisco/Linksts PAP2T can cope with pulse dial. Happy to send you one over configured to bridge to SIP or have a crack myself at actually getting it to make a call
Amazing device… so clever!
That is really fascinating! 😀
Funn, freaking, fantastic. Thanks for this pice of old and cool stuff.
Apparently it was late 70s. No idea how it remained in production till 95.
It's the fate of most late combloc era utility products. For example, the most popular light-duty truck around in Poland in the 90s was introduced in the 50s, received the last lift in 1970, and was then made until 1998 with basically no further changes.
It might have had to do with the depression and chaos of the 80s. A lot of modernization/development programs were nixed at that time, both in the USSR and in other combloc countries, across various fields.
Indeed, the motto was never change a running system. That was ensured by overboarding bureaucracy, lack of motivation and scarcity of almost everything.
Like in GDR the Trabant car, whose body was cased in phenolic rag and cardboard from 1958 to the end of production in 1991.
This is amazing. I had no idea core memory was in consumer products.
Specifically, it's Core rope memory.
Great content as always, any chance of making the schematic available on-line?
electricstuff.co.uk/trill2.pdf
Literally a piece of space technology (the rope core memory) on your desk, amazing! I wonder if they advertised it as such at the time.
i love how these looked
That's some really clever stuff. Makes me want modern devices that don't need much configuration to do this.
When you think about it, there's really no more reliable or robust memory. In essence unless you physically break it, memory will not change. That's a really difficult task to achieve with any memory, let alone technology this old.
mind blown........
Very interesting, I thankyou
Anyone knows older Siemens Hicom Phones? The standard phone for the lower ranks had 4 or 10 buttons to store numbers. There was an additional boss pad available with 20 or 40 extra buttons to make the owner feel important.
So this soviet device seems to be the equivalent to that, as the owner of a phone in soviet times was already very important, but only the most important people who could afford or were acknowledged to buy this device would be able to dial a number with one fingertip instead of bleeding fingers.
I always said dealing with soviet technology requires a very specific mindset, especially if you are used to western stuff. Living in a post-soviet country I have encountered a lot of their tech as a kid, but only recently came to realise just how different some of it was from the equipment that trickled in from the west in the 90's. Great video!