12 3D printed tools you need for your workshop

Sdílet
Vložit
  • čas přidán 18. 05. 2024
  • UPDATE! Part 2: • 12 more 3D printed too...
    3D printing can be incredibly useful! In this video I take you through some amazing workshop tools provided by the community for you to 3D print for free. The next time your non-3D printing maker buddies tease your 3Dbenchy collection, break out some of these gems.
    Please share your favourite 3D printable tools in the comments below!
    0:00 Introduction
    V-roller bearing extractor: www.youmagine.com/designs/bea...
    Bearing extractor video: • How to extract a beari...
    1:09 Centre finding tools
    Centre finder (straight): www.thingiverse.com/thing:672343
    Centre finder (circular): www.thingiverse.com/thing:328...
    Centre finder (drilling): www.thingiverse.com/thing:336...
    4:27 Measurement tools:
    Metric screw measuring device: www.thingiverse.com/thing:463...
    Fillet gauge: www.thingiverse.com/thing:118...
    Angle measuring tool: www.thingiverse.com/thing:214...
    Lockable contour gauge: www.thingiverse.com/thing:472...
    9:22 Sanding and painting:
    Mini sanding block: www.thingiverse.com/thing:463...
    Paint cones: www.thingiverse.com/thing:121...
    11:32 Striking and cutting:
    Thwack: www.thingiverse.com/thing:34404
    Thwack V3 easier print remix: www.thingiverse.com/thing:172...
    Tube cutter: www.thingiverse.com/thing:284...
    13:48 Clamping:
    Mini machine vise: www.thingiverse.com/thing:202...
    Nano vise: www.thingiverse.com/thing:206...
    Kant twist clamp: www.thingiverse.com/thing:283...
    Kant twist assembly video: • Video
    16:06 The next level!:
    Hand held drill press: www.thingiverse.com/thing:358...
    Dremel drill press: www.thingiverse.com/thing:754248
    Transformable Dremel table saw / disc sander / shaper: www.thingiverse.com/thing:236...
    Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
    Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
    3dprintersonline.com.au/
    Take a look around and if you like what you see, please subscribe.
    Support me on Patreon: / teachingtech

Komentáře • 586

  • @MariusHornberger
    @MariusHornberger Před 3 lety +886

    Always nice to see one of my designs making another appearance! Thanks for including it in this video

    • @reinholdu9909
      @reinholdu9909 Před 3 lety +12

      @Marius Hornberger *Center Finder* does it. I gave away 5 as a present now. 2 new subscribers to your channel ;-)

    • @XTACB4
      @XTACB4 Před 3 lety +6

      Thank you for sharing your work!

    • @willemkossen
      @willemkossen Před 3 lety +6

      great to see my favorite youtubers meet. i love the vacuum thing to catch drill dust, used it a lot!. i'm going to print the centerfinder too.

    • @lg3988
      @lg3988 Před 3 lety +5

      @Marius Hornberger when you make great stuff some day someone will notice :)
      Aber wir brauchen mehr Content!

    • @alpachino468
      @alpachino468 Před 3 lety +2

      When he said your name, all I could think was... Mmmm... Burger...

  • @TheRainHarvester
    @TheRainHarvester Před 3 lety +85

    For internal fillets, grab a deck of cards to slide into the curve. Then measure the outside curve of the deck.

    • @Lord_zeel
      @Lord_zeel Před rokem +5

      Essentially a tiny contour gauge. Smart.

    • @scottwillis5434
      @scottwillis5434 Před rokem

      Or, a stepped rod or quarter rod with known diameters.

  • @noahcampbell7835
    @noahcampbell7835 Před 2 lety +3

    I agree. A lot of prints are just random stuff, but I appreciate both this videos usefulness and appropriateness(tools that would actually work if printed instead of being to weak for their purpose)

  • @joefaraone977
    @joefaraone977 Před 2 lety +2

    Thank you Michael! I just assembled my printer today. Watching this several months ago, I couldn't get over the ease with which such useful tools could be printed for use in my shop! I couldn't get your video out of my head, so I pulled the trigger and bought my first printer. Thank you! (I think!)

  • @chrisbowpiloto
    @chrisbowpiloto Před 3 lety +15

    Good timing. I am visiting a handyman friend the end of this month and I plan to print and bring a few of these things as host gifts for him.

  • @marsgizmo
    @marsgizmo Před 3 lety +97

    great functional designs 👌

  • @H3liosphan
    @H3liosphan Před 3 lety +38

    I've been 3d printing for ages but never saw a lot of these designs. Very cool. You can never have too many clamps.

  • @pnwRC.
    @pnwRC. Před 3 lety +10

    Neat video! I found a most of these tools to be potentially valuable in my tool kit. Now I've got to start printing & assembling them!

  • @hcpookieWorkout
    @hcpookieWorkout Před 3 lety +8

    I never knew I needed all of these neat tools until this vid - thanks!

  • @padoco73
    @padoco73 Před 3 lety +18

    Pretty much anything from Marius is worth getting. Dude is a genius.

  • @LT72884
    @LT72884 Před 3 lety +37

    The radius gauge is the best. I created one a few years back and printed it off. Saved me many tmes haha

    • @MaximilianonMars
      @MaximilianonMars Před 3 lety +1

      It's the next thing I'll print, I hate estimating radii on filets!

    • @LT72884
      @LT72884 Před 3 lety

      @@MaximilianonMars you wont regret it. Tjey are the best

  • @JeanMarieAstrucWorks
    @JeanMarieAstrucWorks Před 3 lety +18

    Many thanks Michael for the featuring. Since your video, the paint cones are downloaded by numbers! I wish people are enjoying them. I'm an early follower (with my home account) of your channel which is pretty interesting everytime. Thanks again and greetings from France ;)

  • @Nifty-Stuff
    @Nifty-Stuff Před 3 lety +45

    Michael, GREAT job as always! Your content continues to be some of the best out there. You clearly put a ton of time in preparation, filming, editing, etc. Keep up the great work!!!

  • @ripper9111
    @ripper9111 Před 3 lety +13

    This is one of the best 3d printing videos I have seen yet. It's one of the reasons why I bought one. Excellent content. Kids learning skills would also really benefit from content like this as well. Terrific job!!!

    • @atmosrepair
      @atmosrepair Před 2 lety +1

      Absolutely! This video is the one that has finally pushed my hand, that's it, I am buying a 3D printer! Whoopi!! :)

  • @Raytenecks
    @Raytenecks Před 3 lety +8

    I've seen so many of these "3d printed tools you need!" videos that were garbage that I very nearly didn't watch this.
    But this was actually a good one. There are a few on here that I'm seriously considering printing.
    Thanks!

  • @patrickm6000
    @patrickm6000 Před 2 lety +3

    I'm just getting into printing. I'm waiting for my first printer to arrive in a few days. I'm blown away with just how much useful things can be printed. Saves so much money over the long haul being able to make these little tools at home that at the box stores can cost a fair amount of money over time.

    • @jacobdillon3635
      @jacobdillon3635 Před rokem

      What printer did u get

    • @patrickm6000
      @patrickm6000 Před rokem

      @@jacobdillon3635 I got the aquila x2. But don't waste the money on it. Get the original aquila. I've done a lot of printing since getting into it. Got my son and son in law an aquila. They love them. They work really well.

  • @dnstech8627
    @dnstech8627 Před 3 lety

    I will be printing most of these I think, I keep meaning to print a few of these but this is a great motivation to get them done. Thank you for the great video, especially showing the devices in use!

  • @Anarasha
    @Anarasha Před 3 lety +50

    The Thwack plastic hammer can also be used for jewellerymaking and stuff like that. But at that point you absolutely need to print it on its side as that is quite a bit of force

    • @atmosrepair
      @atmosrepair Před 2 lety +6

      Yes I agree! Soft hammers/mallets come in very handy when it comes to jewelry making, as well as many other automotive repairs as well! When you're knocking a gear into place, you dont want to smash teeth. Rubber mallets are used often, but they're typically pretty large, and this plastic design gives ability to make a mallet to fit perfect size necessary!

    • @schlomoshekelstein908
      @schlomoshekelstein908 Před 2 lety +3

      @@atmosrepair nobody uses a rubber mallet to knock a gear into place. what the fuck are you smoking?

    • @llamajuice
      @llamajuice Před 2 lety +2

      @@schlomoshekelstein908 Based on that user's name, there's a chance they're talking about gears in a clock.

  • @matthewwyatt7912
    @matthewwyatt7912 Před rokem +1

    Man, I absolutely LOVE your channel. All your videos have helped me so much with my journey into 3D printing. Thank you. Please keep up the amazing vids mate

  • @bretttoynton1982
    @bretttoynton1982 Před 3 lety

    Wow amazing what some people can come up with. Thank you to all the people that put these models up!!!

  • @charlesbeshaw9843
    @charlesbeshaw9843 Před 3 lety +13

    Thank you Michael for an informative video. You would think I would look for tools that I can print instead of buying. Sometimes we need someone like you to point us in the right direction.

  • @WKfpv
    @WKfpv Před 3 lety +1

    I've been using the fillet gauge for years. It's a must have tool if you model things.

  • @americannobody27
    @americannobody27 Před 2 lety

    I'm 42 with many years experience with tools & that very first center finder was badass, and something I've never seen before. I REALLY REALLY want one!

  • @user-dy1tl8hg6t
    @user-dy1tl8hg6t Před 2 lety +1

    as a welder/ fabricator i want to say that these are great. i legit want that centerline tool.

  • @normanperkel139
    @normanperkel139 Před 2 lety +4

    This was EXACTLY the video I needed to see to get me stoked about buying my first printer. Thank you so much for sharing!

    • @almigoshield
      @almigoshield Před 2 lety +1

      Me too. I'm going to be printing for a while!

  • @LordWillyGee
    @LordWillyGee Před 2 lety

    Great stuff to print off of a 3D printer. Oh, more stuff to misplace in the workshop, when looking for them. Can't wait to build these when I get a 3D printer. And a BIG THANKS! To all for their great idea to help hobbyists have a better workshop!

  • @Plugbrooks
    @Plugbrooks Před 3 lety +1

    Thanks for the video Michael! I think I'll be printing that fillet gauge straight away.

  • @edwardfletcher7790
    @edwardfletcher7790 Před 3 lety +9

    That last clamp would make an amazing microphone, camera, Smart phone mount for filming !

  • @eiZnoopS
    @eiZnoopS Před 3 lety

    thanks for taking the time to make this video, was skeptical at first but now i just have a huge list of things i want to print, looking forward to watching your other videos

  • @woodwaker1
    @woodwaker1 Před 3 lety

    Thanks for putting together this collection. A LOT OF USEFUL TOOLS!

  • @lauramarshall6376
    @lauramarshall6376 Před 2 lety +1

    My husband has a 3-D printer and is always looking for something to help me in my wood shop. This is great. Now he has 4-5 things to make for me. Thanks.

  • @morkbov
    @morkbov Před 3 lety

    Impressive. Never thought 3d printed plastic gizmos could be so handy. Thanks for sharing.

  • @avejst
    @avejst Před 3 lety +1

    Great designs!!
    Great video as always
    Thanks for sharing your experience with all of us👍😀

  • @IvanJoel
    @IvanJoel Před 2 lety

    I doubted them seeing plastic tools in the thumbnail but the video surprised me. Now I'm looking forward to printing these. Thanks for sharing!

  • @machgt
    @machgt Před 2 lety

    I printed a dremel adapter that converted the dremel into a small router with a guide for cutting the binding channel on a guitar body and headstock. I have quite a few hold down clamps made on the printer along with enclosures, t-slot nuts, zip tie mounts.... etc (to infinity)

  •  Před 3 lety

    Wow! I will absolutely be printing a good deal of these! Thanks for sharing mate!

  • @basstone18
    @basstone18 Před 3 lety

    I spied the Lowrider2 belt stops, and was hyped to see you have a Jimny!

  • @Sundogz
    @Sundogz Před 2 lety +1

    Very good presentation - you did your homework and showed us some practical toolage that can be custom made for our purposes. I will be printing some of these soon. Thanks!!

  • @Humatra
    @Humatra Před 2 lety

    I love these kind of videos. I think I'll print that tubing cutter tonight. Thanks for the video

  • @IdRatherBeMaking
    @IdRatherBeMaking Před 3 lety +2

    Nice! A lot of great items here. The center finder is excellent, and I need that fillet gauge, badly. Time to preheat!

  • @dedogster
    @dedogster Před 3 lety +1

    Those are some great examples! There are a couple of us at work with printers and we have made a few custom tools that we cant buy but would be crazy expensive it we sent out to have it done, very handy!

  • @Just_Ignorant
    @Just_Ignorant Před 3 lety +1

    Great video, nice to see someone using one of my designs. Thanks for featuring!

  • @majorredbeard
    @majorredbeard Před 2 měsíci

    Kudos for giving visual examples for all of these, even the ones where you didn't have a great use case at the time. That's still a bunch of extra work that you didn't have to do. Thank you, and excellent quality video with lots of good information!

  • @joepeach997
    @joepeach997 Před 3 lety

    Timeless and brilliant!

  • @AliasWilson
    @AliasWilson Před 3 lety +1

    This video goes directly in my favorite list...!!!

  • @lynn6799
    @lynn6799 Před rokem

    These videos are making me want to buy a 3d printer even more. The more I watch, the more things I see I can print and use one for. I have a few ideas for projects that I have yet to see on here, but I seriously want to design and make for myself. Stuff I know I can use and others as well.

  • @bernhardweiger147
    @bernhardweiger147 Před 2 lety

    Great Job. I'm a beginner in case of 3D printing. So this examples are great. I look forward to see more of this stuff.

  • @Ralnarene
    @Ralnarene Před 3 lety

    This seems like perfect timing. I was just wondering what I wanted to print while I'm between projects. I can always go for another hammer!

  • @williamjames9515
    @williamjames9515 Před 3 lety

    Good selection of tools. Well presented! Thank you.

  • @AndrewAHayes
    @AndrewAHayes Před 3 lety

    I printed the contour tool and enabled ironing on the tines to get a nice smooth finish, I am thinking of reducing the width of the tines to increase the resolution as it gives thick castle edges at the moment.

  • @ramalightfoot9943
    @ramalightfoot9943 Před 2 lety

    this is the first 3d printing video where I can't find a single print I don't want to print. This is an incredible video. Thank you for making it!

  • @Boulder_Bill
    @Boulder_Bill Před 3 lety

    Cant wait to print these all out and put them to use.

  • @nickjanowski3200
    @nickjanowski3200 Před rokem

    Thanks for all of your hard work! You have guided and inspired me many times. Thanks for the links!

  • @Comm0ut
    @Comm0ut Před 5 měsíci

    That Kant-Twist style clamp mimics the famous metal versions. That tubing cutter is ideal for square cuts on heat shrink tubing.
    Tube and pipe notching templates for marking saddle cuts would be exceptionally useful.

  • @Orion_Alathorn
    @Orion_Alathorn Před rokem

    thwack is 100% going in my list of first things to print, that looks just super useful

  • @MarketResearchReading114

    I just saw this, and I thought it was a very thoughtful and useful video. Thank you so much for going through the effort of trying to help people :)

  • @Shirden
    @Shirden Před 3 lety

    Awesome stuff! Thank you for this!

  • @madmachanicest9955
    @madmachanicest9955 Před rokem

    that tube cuter looks amazingly

  • @eulachonfish
    @eulachonfish Před 3 lety +1

    Thanks for sharing, these are all useful tools. The drill press center finder in particular will be very useful. Also, I probably hate sanding just as much as you do.

  • @Itsdirtnaptime
    @Itsdirtnaptime Před 3 lety +4

    There are a few things that I like and will print off, but one stands out to me. I use cantilever clamps quite often for professional use. Kant-Twist being a brand name and the ones I have always used. So I'm curious to see how well the non metal counterparts work.

  • @ChrisBrown-ux8jn
    @ChrisBrown-ux8jn Před rokem

    I must say I think Michael, has the best presentation technique of anyone on youtube.

  • @H4rleyBoy
    @H4rleyBoy Před 3 lety +2

    What great video, it's great to see all these collaborators sharing their designs, I 'don't have a 3D printer, but I feel maybe I should look into it, but one might be enough, I don;t want to become a hoarder.

  • @prince3121
    @prince3121 Před 3 lety

    Thanx for this informative and useful tools video. Definitely going to print a few of these.

  • @jawaring4367
    @jawaring4367 Před 3 lety

    the dremel table saw and cordless drill press are really interesting

  • @diamondsky3530
    @diamondsky3530 Před 2 lety +2

    My boss got me into this and is selling me my first printer tom. I do gotta say from the countless sites I’ve visited these last couple weeks the printing community really is extremely helpful and giving. I look forward to getting in this hobby

  • @torravengael4490
    @torravengael4490 Před 3 lety +1

    Useful stuff. Thank you!

  • @MissionSRX
    @MissionSRX Před 2 lety

    Handy stuff! I've spent a year making vacuum fittings so all of my tools can be attached to the same Festool vac hose. Proprietary bags and fittings no more!

  • @SeamusDunmaggotin
    @SeamusDunmaggotin Před 2 lety

    Wow, thanks so much, my printer just paid for itself, the pipe centering tool just made my life so much easier, and wow...

  • @rodsnyder6020
    @rodsnyder6020 Před 3 lety

    Very nice collection of useful tools! Thanks.

  • @ltemes
    @ltemes Před 3 lety

    Thank you so much for reviewing my tool in the video. :-)

  • @ribeets
    @ribeets Před 7 měsíci

    The last clamp would be great for book binding!

  • @erick2will
    @erick2will Před 3 lety

    Very useful for sure! Thanks for sharing!

  • @bruceyoung1343
    @bruceyoung1343 Před 2 lety

    Thank you for the ideas. Now realy excited to print few on them on my recently Ender extender’d E3 Pro.

  • @RelentlessHomesteading

    Wonderful choices -- I'm just starting and wil be printing a number of these.

  • @Cyan2002
    @Cyan2002 Před 3 lety +1

    Great video! I love the MCM Chopped shirt!

  • @stevecummins324
    @stevecummins324 Před 3 lety +1

    Might try that center finder.
    Sick of breaking 0.254mm bits when I've been trying to drill into 8mm tube.

  • @CyberSyntek
    @CyberSyntek Před 3 lety

    Lovely watch. Very tempted to side tracked from my current projects to print a few of these off. Very handy. :)

  • @CharlieBasta
    @CharlieBasta Před 3 lety

    Always love these videos.

  • @NiSE_Rafter
    @NiSE_Rafter Před rokem

    I printed a smaller and a scaled up Twack. I freaking love them lol. Much bonking to be had.

  • @MirkWoot
    @MirkWoot Před 3 lety +1

    Alot of these are interesting, like the center marker/finder, cutting tool, sanding block... but I think things like contour gauge, angle finder and hammer, are much better bought

  • @Adam-qr4jj
    @Adam-qr4jj Před 3 lety

    Lots of good tools and good design! Cheers and great video btw 👍

  • @madkvideo
    @madkvideo Před 3 lety

    Amazing tools! Thanks!

  • @sathos
    @sathos Před 3 lety +8

    Loving the mighty car mods shirt hehe

  • @feral7094
    @feral7094 Před 2 lety

    That screw measurement gauge is actually super nice

  • @finlandjourney6065
    @finlandjourney6065 Před 3 lety +8

    The 3D printing Terminator strikes again. The clamps are a work of art, really.

  • @geoffwade8144
    @geoffwade8144 Před 3 lety

    I like this video- it's well done and the parts look useful. Thank you.

  • @borjesvensson8661
    @borjesvensson8661 Před 2 lety

    That first centrefinder is handy and quick but the traditional way to find the center is not measuring with a ruler😉
    You simply use a marking gauge, calipers or even place your fingers against the piece as reference to mark an aproximation of the middle of the piece and then transfer that measurement to the other side and mark the point in the middle of your two marks. Thats the centre, just set wathever you used as a marking gauge to that and scribe along the piece.
    Even using your fingers as a gauge produces a suprisingly accurate center line.

  • @hydeane
    @hydeane Před 3 lety

    Very nice, some awesome tools there!

  • @JAYTEEAU
    @JAYTEEAU Před 3 lety

    Fantastic Michael, these were great. Cheers, JAYTEE

  • @mostcom
    @mostcom Před 2 lety +1

    Came here on 10/22/2021 after seeing a shout out from Naomi 'SexyCyborg' Wu and seeing you wearing a Mighty Car Mods chopped tee shirt. I am very impressed with your style knowledge and personality. Your students are truly blessed.

  • @coreymac2381
    @coreymac2381 Před 3 lety

    Nice video! I prefer to print functional rather than decorative items. Thanks for sharing.

  • @avega2792
    @avega2792 Před 2 lety

    That tube cutter is the best of the bunch, especially since I could have really used it to cut the Capricorn tube for my Ender 3 Pro!

  • @PresidentElectLeRoy
    @PresidentElectLeRoy Před 3 lety

    I really like the clamps, all of them.

  • @Wraith-Kryptos
    @Wraith-Kryptos Před 3 lety +5

    I love it that he doesn't just steal other people's design like another 3d printing channel I know (ejem..starts with an m and ends with an o and has a weird SZ in the middle) or just, like, say "I found this on thingiverse!!".
    He actually gives people credit!

  • @zbynekchmela7778
    @zbynekchmela7778 Před 3 lety

    Great list, thanks!

  • @speedhump231
    @speedhump231 Před 3 lety

    Printing the tube cutter. Very nice design.

  • @Jake-mm1cz
    @Jake-mm1cz Před 3 lety

    All of those 3d printed tools can be very useful . I have save & shared this video . Big Thanks

  • @molonlabe5090
    @molonlabe5090 Před 2 lety

    That roundstock center finder is going to come in so handy for ECM barrels..

  • @neilorourke71
    @neilorourke71 Před 2 lety

    A trick you can use when printing objects that have insets to take nuts- if the nuts are shearing the plastic insert, powder some baking soda into the hole. if you want, you can put some paper at the bottom to plug the hole and contain the powder. dust up the nut a bit as well. re-insert the nut. Then take a thin-consistency superglue and apply it around the edge of the nut, making sure it absorbs into the crevices. The powder will act like a sponge and soak up the glue. Once it dries it is rock solid. I used this trick when I made a small Dremel press. Used it for inset on the gear that raises and lowers the dremel. In testing I tried to see how hard I could force it down before it broke. It didn't lol. The rods that the dremel head was riding on popped out of the base first.

  • @1337SJLewis
    @1337SJLewis Před 3 lety

    Great video idea mate.
    Top stuff.