10 Useful 3D Printed Tools #2
Vložit
- čas přidán 22. 08. 2021
- Get your things 3D printed at: www.pcbway.com/
WIN Prizes at PCBWay 4th PCB Design Contest: www.pcbway.com/activity/4th-p...
10 more 3D printed tools, which could be useful to you. You can buy this kind of tools from store, but why not to 3d print them.
✎STL FILES:
1. Trim/clip popper: www.thingiverse.com/thing:489...
2. Faker Knife: www.thingiverse.com/thing:489...
3. Tire groove measure tool: www.myminifactory.com/object/...
4. Razor scraper handle: www.myminifactory.com/object/...
5. Carparter's square: www.thingiverse.com/thing:434...
6. Oil filter wrench: www.thingiverse.com/thing:217...
7. Spray can handle/trigger: www.thingiverse.com/thing:450...
8. Poloh Brush: www.thingiverse.com/thing:171603
9. Equal space divider: www.thingiverse.com/thing:304...
10. Metric bolt and nut sorter: www.thingiverse.com/thing:465...
Big thanks to models creators!
✎MUSIC:
* Track: Vein - KV [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Vein - KV | Free Backg...
Free Download / Stream: alplus.io/vein
* "Bombora - by Uniq" is under a Creative Commons license (Creative Commons - International Recognition 4.0 - CC BY 4.0)
* "Reverse - by Uniq" is under a Creative Commons license (Creative Commons - International Recognition 4.0 - CC BY 4.0)
✎3D PRINTER: Creality Ender V2
✎FACEBOOK: / 3d-printsbuilds-101348...
✎INSTAGRAM: @3dprintsbuilds
✎TikTok: @3dprintsbuilds
✎Cults3d: cults3d.com/en/users/3DPrints...
✎THINGIVERSE: www.thingiverse.com/3dprintsb...
#3dPrinting #Timelapse #3DPrintedTools - Věda a technologie
Nice stuff. That "equal spacer" could use a wingnut on a small bolt to lock it in place to keep going without error. Thanks for the link!
I enjoy this type of video and appreciate the time and effort you put into it. It's a great way to get ideas for future prints. Thanks!
Thanks!
Did you just super glue what is supposed to be a replaceable boxcutter blade into that "faker knife"?
For the tire tread depth gauge and the bolt&nut sorter you can color the legends a little easier if you switch filaments to black (or other contrasting color) for the last couple layers. That'll save the marker issues that I always have of the ink running down and bleeding across the face of the part. The issue with the marker on the square is probably because the markings were debossed (sunken into the surface) instead of embossed (sticking out of the surface) like the tread depth gauge and bolt&nut sorter. But, since that was printed with the markings on a vertical surface, the color changing trick would be a major pain even on a printer that has decent M600 support.
In #2, how do you change the blade, if it's all glued ?
It appears to lock in the blade out position, but not lock in the safe to carry position. What a stupid overall design flaw
@@jasond9824 I printed one, it locks it into both positions.
It's not supposed to be glued in place. There's a tab by the blade divots (where the blade locks in place) that you can push out of the way to remove the blade and replace it.
U cant.
Thank you for the update.
for the nuts & bolts shorter, you should add the size to the nut side
Spray can handle needs an adjustable end stop so u can just sqeeze handle and set the exact spray volume without the need to hold just the right squeeze to get what u want for spray pattern.
Look so cool that bro
i like the concept very much 💕👌👍
What settings did you have to change on that first print? I’ve had that problem with one of my printers and don’t know how to fix it.
I changed line width from 0.3 to 0.4mm
nice combination of useful tools. keep uploading. good luck .
Thanks!
Awesome video and content 👌 what does R. F on the oil wrench mean?
Thanks! The R. F. are the initials of the designer. Rusty_Fly
On your recessed groves,(like the carpenters square) you should try a wax crayon 🖍 instead of a sharpie. It works great. You can rub off any excess with a paper towel for clean marks.
Thank you for the idea. I will try it someday.
Only spacer and bolts measure tool are useful. The rest are good only in collecting a dust or filling recycle bin.
Do you have your print settings displayed anywhere? I just got a ender, and my prints never come out looking that nice.
Cura profile for Ender 3 V2: www.mediafire.com/file/sxlrfx1jiebkcif/Ender_V2_Basic_settings.curaprofile/file
what cura settings are you using for those clean prints?
I have different settings for different prints, but I can share my basic Ender v2 PLA profile: bit.ly/2Zg40Ff
Привет а ты не печатал корректоры в фары для е39. Спс если есть стл скинь плиз. Удачи
I have the same problem witch my 3d prints that you in first print. What did settings you change.
Changed line width back to 0.4mm
Nice .. Can I have the wood burner link and permanent marker link?
Wood burner: s.zbanx.com/r/0oD7Tzj2iDwR
Permanent marker: euro-industry.com/main.php?index=details&cat=8&prod=23201550&lang=de
What did you applied to the spring?
I applied grease.
The nr10 yellow bolt and nut sorter.. you got a link? For the file
Link in the description.
It's more expensive to make these than it is to buy ones that are readily available on Amazon lol
Lol. Most of these prints probably cost less than $1.50.
@@pcerano742 and yet, they aren't even worth $1.00 🤣
Whipping that blade around was freaking me out.
Nr. 1 Trim/Clip popper - what filament is it, please?
PLA
@@3DPrintsBuilds Dude.. what brand / color? xD
@@S.... Gembird Gold Metal PLA
amd why didnt you loosen the oil filter cap that fit perfectly?
Bc the tool would have disintegrated with any amount of load
Print = 'auxiliary handle' for drill machine.
You have a typo in your ad, the word you want is "stuff" not staff
i saw that 3d guns folder, can't stop the signal.
Why would I go through the tedious task of making that brush when I could do the same job with a cheap 25-cent chip brush?
Hi. Which slicer do you use?
Cura
@@3DPrintsBuilds How did you get the numbers printed on top? They look bad to me when printed.
@@granul555 Look over your print settings. Maybe you need to slower down or change layer height.
@@3DPrintsBuilds Can you please share your Cura settings?
@@granul555 I use different settings with different prints and printers. Here is one of my Ender V2 settings: www.mediafire.com/file/v0l8ifqz7seiazs/Ender_v2_0.2mm.curaprofile/file
I will have to get my printer set up so I can utilise it better.
👍 👍 👍 👍
Lol... why did you glue the blade into you knife?
🔥💕👌👍
Полезные инструменты? Ну уж линейку то можно купить в магазине. Как и почти всё остальное
Is everybody just that messed up every one of those things that I see I don’t have the design I don’t have the figure out the way to print it or make it I don’t have to buy the printing material to do it it’s already there all I Gotta do is go to the damn store and buy it and once I figure out the time spent and the printing material it’ll be about 75% cheaperIf I just go buy it
Got a headache reading your comment. No punctuation?
Игрушки и ее более того.
Hii
Jump to 8:43 believe me, watch till the end. Don't waste your time like I did.
If you have to use super glue on a removable part it's not convenient
Or maybe just buy a cutter and save the 6 hour of printing
gdzie na stole kroisz.. matka by Ci zaraz pokazała ciachanie na stole
Самоделки полная хуйня (с) Доктор Дью ((((
☝️ I'm the first person to design "print in place" brooms and brushes about 8 years ago.
Can't you spell?
Useless
Seriously ? What have you done here ? You are not the owner of designs, you just publish timelapses of your printer printing other guys work !
Where does he/she claim that?
Where do they claim its theirs
They don't claim the designs are theirs, and they link the the stuff. It's just to make people aware of the files
So, yes everybody, but where are the credits (in the video) ??? Where is the creativity ? What does this video give more than a search on stl search engines ? I'm just saying that there is no work on this video... I'm here for having more that just that I could by myself
@@MrToufou54 yes u can do it yourself..this just show to people that these file exist..the maker of the file allot them to do this cuz its freeeeeeeeee
I need one of those Faker ꓘnifes.... lol Thanks for the share.. Just stumbled upon your channel!!!