3D Printed Tools #3 2022
Vložit
- čas přidán 8. 06. 2024
- Get your models 3D printed at: www.pcbway.com/
It's the third video about 3D Printed tools. Some are more useful than others, but all are fun to print and also these tools make some work easier and faster to do. And as usual big thanks to model designers and also to sponsors.
✎STL FILES:
Bowden PTFE tube cutter: www.thingiverse.com/thing:514...
Woodworking ruler: www.thingiverse.com/thing:516...
Ratchet Wrench/Fidget toy: www.prusaprinters.org/prints/...
Nano Vise V2: www.thingiverse.com/thing:517...
Precision Tweezers v2: www.prusaprinters.org/prints/...
Filament Cutter 45°: www.prusaprinters.org/prints/...
Rounded Corner Template: www.thingiverse.com/thing:475...
Spring Factory: www.thingiverse.com/thing:517...
Radiator bleeding tool: www.prusaprinters.org/prints/...
Dial Caliper: www.thingiverse.com/thing:831597
Center Finder+Edge Marker: www.thingiverse.com/thing:360...
Paper Cutter: www.thingiverse.com/thing:516...
✎MUSIC:
*Music Info: Wanderer - by SoulProdMusic.
Music Link: bit.ly/3Iu4MQb
*"Tokyo Music Walker - Way Home" is under a Creative Commons (CC-BY) license.
czcams.com/channels/3lL.html...
Music promoted by BreakingCopyright: bit.ly/way-home-song
*Beach Buggy by Smith The Mister smiththemister.bandcamp.com
Smith The Mister bit.ly/Smith-The-Mister-YT
Free Download / Stream: bit.ly/-beach-buggy
Music promoted by Audio Library • Beach Buggy - Smith Th...
✎3D PRINTER: Creality Ender V2
✎FACEBOOK: / 3d-printsbuilds-101348...
✎INSTAGRAM: @3dprintsbuilds
✎TikTok: @3dprintsbuilds
✎Cults3d: cults3d.com/en/users/3DPrints...
✎THINGIVERSE: www.thingiverse.com/3dprintsb...
#3dPrinting #Timelapse #3DPrintedTools
Content:
0:00 - Intro
0:11 - Bowden PTFE tube cutter
0:58 - Woodworking ruler
1:41 - PCBWay
2:15 - Ratchet Wrench/Fidget toy
2:56 - Nano Vise V2
4:24 - Precision Tweezers v2
5:14 - Filament Cutter 45°
6:53 - Rounded Corner Template
7:24 - Spring Factory
8:47 - Radiator bleeding tool
9:06 - Dial Caliper
10:07 - Center Finder+Edge Marker
10:50 - Paper Cutter - Zábava
I printed the Nano Vise for soldering small parts. It's handy.
Love this, thank you!
Its nice that you showed the print time and filament usage, great video!
Thanks!
Génial vos réalisations
great ideas!
I might try to make this nano vise + filament cutter and mount it close to the filament roll on the printer ...
The filament cutter would be great for weedwhacker line
I was thinking the same thing lol
Weedwacker line works alright as printer filament also ha
@@MR_G92 Beat me too it! I heard that. Haven’t tried it, yet….
@Jack Williams I tried the oregan 1.7mm line and it printed fairly well
Smart little things😌👌🏼
Excelente video!
Thanks!
Very useful tings printed.
make more video like this! Great work! Like It!
Thanks!
hello very very good thank you
Cool Video😌
Thanks!
All these prints look absolutely amazing I'd love to have your profile loaded into the slicer👍👍👌👌
Класс, реально полезные вещи
Did you use PLA for these items? Am trying to determine which brand to buy.
Some prints are printed with PLA and some with PETG. PETG would be better for these prints.
I have problem printing threads. They have the edge bent upwards and I can't figure out why. Tried speed reduction, fine or normal print, different slicers, different PLA roles... Do you have any advice?
There could be cooling problem. Lower the print temp. Watch over your fan settings. Level your bed. Use slower speeds.
Did you calibrate your extrusion? There are plenty of videos on it. What I think might be happening is that the subsequent layers are cooling down, shrinking, and pulling on the layers below it, thereby warping it upwards. Let me know how it goes.
What are the press in threads called at 5:50?
Threaded inserts. You can screw them in, usually in wood, or heat them up to melt into the pla.
so few likes for such a good video!
Thanks!
5:06 thought it was meant to eat as chopsticks
8:47 Looks like a very bad idea; those valves can get pretty stuck and the last thing you want is for your tool to break just as you've opened the valve. There is quite a lot of water in your heater and most of it is going to come out while you frantically look for pliers. A metal tool costs a few bucks and is guanrateed to work.
Some things are better off in metal, and this is one.
The original bleeding tool, which came with a valve is also made of plastic. I haven't had any problems with valve stuck. It could be a problem, when you over tight them. Water amount in heating system is big, but the valve hole is small and it's not coming out very fast. You can also use screwdriver to close the valve.
Hola, buen día, una pregunta, que impresora usas? Y que material de impresión?
In this video Creality Ender 3 V2 and PLA filament
@@3DPrintsBuilds ok, muchas gracias por responder ❤️👍✌️
No audio for 1st 5 mins
Yeah it was probably removed for copyright
Its ok if u need some not accurate work, or u just dont have time or opportunity to buy an instrument, but overall its waste of filament.
Just think;
How do u want to print and check a precise part if u do not fave a precise instrument to check the accuracy like a caliper, but if u fave a caliper u do not need to print one that will be for sure less accurate…
Не понял со штангеном. Чувак не умеет им пользоваться? Предъявляет разные показания
Paper cutter should be taking only one segment from the box cutter knife, it is poorly designed and wastes a lot of blade
срочно звоните доктору!
Pls add some music to your vid it’s so boring w/o it Music happened at the time of typing lol
You got an dislike because of the volume
I hate when videos have loud annoying intro music, for no reason.
As there is nothing important to hear in this video, may I suggest you just mute the video instead?
@KwentiN I do, but when the loud music starts immediately it's hard to mute it.
It's easier just to click 'don't recommend channel'.
It'd be better if the audio levels were normalised or creators didn't just copy each other and did something original.
It's a shame that all the tools out there for printing are so stupid and useless. :(
useless stuff if you use good stainlessteel instruments. And hey without instruments you cant make postprocessing for 3d prints.
Вставка рекламы в ролики и впаривание всякой хрени - это неуважение своих подписчиков и гостей канала.Хватит воровать наше время! Дизлайк!!!
Useless