Big Excavator Rolls Over in Beverly Hills
Vložit
- čas přidán 25. 08. 2024
- Big Excavator Rolls Over in Beverly Hills. Would you believe this happened right in front of Dr. Phil's $30,000,000 Beverly Hills mansion? We didn't find this out until the end when he drove by, but celebrity and TV star sightings are really common up in these areas. This job came in as a referral and I brought along Alex with me to tackle this difficult job.
We took Hulk, my 50 ton rotator, and Big Flipper, the huge 75 ton rotator, to get the job done based on the initial pictures received. Once we got there, I knew it would be impossible to use two trucks. The incline was much too steep to back up on and two trucks side by side at the bottom was not possible either. We decided to just use Big Flipper solo and got to work immediately.
Step one was to bring the unit close to us so it would be within our boom area. This was done with a 5/8" chain and a Bailey's grommet sling. Once it was within our working area we re-rigged using a Bailey's recovery strap and a different chain for the catch. Quite a few issues came up but nothing compared to my recent crane video. This machine was actually able to be started to retract everything and made the job nice and smooth.
Big Flipper is our strongest rotator and this job really showed the strength and power of what a 75ton rotator can do. Of course the key board warriors will say they could've done this in a flatbed. Makes you wonder why no videos of these 1ton and flatbed warriors doing these type of jobs exist anywhere on the internet though, right? :)
Don't forget to head to www.pepestowla.com/shop after the video and grab your cool Pepe's swag and 2024 calendar to represent your favorite tow company!
►All footage was shot with a DJI Pocket 3, Action 4 and Mavic 3 drone. I also edit my own footage using DaVinci Resolve Studio.
►My company logo and intro/outro graphics were created by / sa.creations
►I purchase my rigging equipment from: baileystowingi...
► The wireless headsets that I use on all my rotators:
setcomcorp.com...
► Buy your own Guardian Angel Device just like mine here!
www.guardianan...
►Get your Pepe's Merchandise here: www.pepestowLA.com/shop
►Instagram: @pepestowing
►Facebook: / pepestowingla
#rotator #recovery #heavyrescue #accident #heavywrecker - Auta a dopravní prostředky
As an equipment operator and equipment owner with a construction company with a few rescues under his belt, in Texas. There are few things I would have done differently in this situation. But I don't think this would have been legal in California. The fact you guys did this without cracking the hydraulic pressure on the cylinders and getting this thing up right is super impressive. Respect where it's due. You guys did a great job.
He’s a pro
Зачем такие сложности? Я так понимаю эвакуатор по времени работает? У нас в России это называется, катать вату, чтоб затянуть время и получить более высокую оплату. Можно и аккуратно выкрутить рукава и слить масло не проливая его на грунт.
On the face of it to us laymen this looked an easy peasy job. And when I started watching I thought this isn’t worthy of a CZcams video given your usual standards. But wow ! How wrong was I !! What a recovery. Not as simple as it looked. Great work and great team work. Best wishes from the UK 🇬🇧
The only way that bucket will curl in is if someone moves the control lever as if they are operating and curling the bucket, unless you break open the hydraulic lines.
That's right
Engine has to be running to do that.
Just crack off the hydraulic lines from the bucket
Just asking, doesn't the big SAFETY level on the left side of the seat be in the DOWN position. I thought that was the main control for any function, so the operator is seated. Again does that lever also have to be DOWN to release Hydraulic pressure. Or is that just a safety solenoid control for just starting.
@@rp1645 That lever is just to lockout the pilot controls, older machines it was connected directly to a valve that blocked the pressure from the pilot pump thus not allowing the pilot valves to actuate the main valve bank. Lots of machines will start regardless of the lockout lever position, some newer machines do have the lockout lever tied into the starting circuit.
What a workout!!!! Alex and Josh, the way you work together is an excellent example of how to get the job done......you guys are simply amazing👏👏👏👏
What a job with that steep grade. As usual, a job well done by Josh and Alex. Kinda funny when Alex had to get the dirt out of his shoe😂
Josh and Alex, you two are a fantastic team, and Josh you must have straight A's in trigonometry. Your ability to figure angles and hook ups and where this huge thing was going, just wow. Great video, loved the camaraderie too.
So many skills, and floating ideas, changes, rerigging Content is head and shoulders above some others who also have channels. Safe and sure - Josh and Alex its a pleasure.
Thank you! I love getting these big huge jobs. Nothing wrong with the other channels who post like 95% winch outs and regular tows, but I like doing 95% rollovers and big recovery jobs
3:00 - Damn, some people are just so careless/reckless/clueless!
There literally is a giant rig with it's hazard lights on, parked on a hairpin curve on a steep grade, and a dude with a high-viz vest blocking the open lane... And here comes Speed Racer at full throttle like he's the Mayor of Beverly Hills.
Stay safe, Josh and team!
What else would you expect from Beverly Hills.their shit dont stink,oh yea,i forgot,they dont shit there
That was Jack Smith speeding through there because he is the mayor of Beverly hills...
guy's driving an older pick-up with cablights. Not a local.
If that excavator had overturned on the road, who knows what effect it would have on traffic. It would be terrifying. I blame the driver for his carelessness.
Well that was different. Really made Alex and you think about how to do it. Great job guys. I actually don't care about all that rich people things. I could pass by all those famous people and never know who they are or care. My normal day to day is enough for me. Thanks for sharing. Much love. Stay safe and healthy
Josh, I absolutely enjoy your sarcasm. Dr. Phil approved!😅
That engine can be hydrolocked, so you have to pull the injectors to be on the save side. That smoke showed that oil went into the combustionchambers, hopefully it went good.
I put a Case 580- C on its side when the trailer ramp broke. It sat on the roll cage. No full tip over. I rode it over 😊 when we uprighted the backhoe. I checked the fluids and I thought the battery would have leak out. It did not. The old girl STARTED right up. It totally😮 shocked me.
Yes, that could of been a very expensive crank over
only if its a clapped out pos
Fantastic job, Josh and Alex. You guys got a plan for everything!!
That was one heck of a job on a super steep hill. Josh and Alex did a fantastic job getting it up and set where they can now work on it! Great job Pepes Towing!
It is great to see you two guys working. Bouncing ideas off each other, no egos, just professionals getting the job done.
Crazy how those roads are..great job guys..
What's crazy about them?
I guess it's a bit steep, but nowhere near crazy steep.
I guess you could say that the width of the road is crazy. Crazy wide for a residential road (unless that's a through road to another larger residential area)
Alex, Josh and Big Flipper are up to the task! Great video.
Another incredible recovery, you guys are so spot on with the rigging at impossible angles. Very impressive company. 👍👍
The angle of the dangle was just right. 👍 😀😀😀
Amazing! You guys really understand the scale of the risks involved, know what you're doing, take your time, and use your equipment masterfully. And Flipper makes the excavator look like a toy. Thanks for going to the extra effort to record and share this. Cheers!
Great job. You kept working at it with what you brought and you accomplished the task at hand. High marks!
That was recovery ballet! Your skill and experience was on display for everyone to enjoy. Amazing job!
I've seen alot of rotators but just my opinion I think Ron Pratts rotator is the prettiest one of them. And I like that he truly takes really good care of her.
I disagree. Flipper is a little bland, but the Hulk runs rings around the look of Ron's and these guys dont preach to you and thats why I unsubbed from him.
Streets like that would be impossible in any area that ever gets snow.
10000%. Even when it rains people get crazy lol
i know you charge a lot of money for what you do but you worth every penny of it good luck be safe
Good teamwork as always Josh and Alex. Ya you had inconveniences like soft gravel and a 45° incline but at least you didn’t have power lines. I’m sure hulk was sad that he couldn’t help 😂
It was sad at first I couldn't help but still ended up helping since we both thought up the game plan and rigged together. Always good to have help even if it isn't in the form of a 50ton rotator lol
@@PepesTowingService team work makes the dream work and gets the job done ✅. You and Alex make such a good team. 👊🏻
You guys make me laugh ❤ you both. Great team work
من مالک آن هی هوندا هستم 😢😢😢ورشکست شدم بیل را به قیمت زیر فوختم😢😢😢😢
Nice job!
Every time I watch your truck in action I’m astonished by how strong it is. And it’s like the Swiss Army knife of tow trucks.
The boss asked me "Why are you dragging that chain?" I said " Because it's easier than pushing it!"
"You want to help? Climb inside the cab, be ready to stomp on the brakes"
"For Real?"
Classic!
🤣
I really like watching you, Pratt, & Plaza. It seems you all gat in to different situations that have to be figured out.
This is a team that is calm, organized, and never flustered.
Yes, for sure. Josh and Alex make a really good team...always bouncing ideas off of each other with no egos involved.
😢 @@normawade9426
Awesome job, guys. i wonder how many people freak out when they start that machine and let the oil burn out of the exhaust 😂
That's a signal to either shut down a diesel or run 😅
Just having the ignition on wasn't enough to open the valves, he also needed to bring the safety arm down to engage the hydraulics.
I don't think the "operator" understood that he didn't actually have to start the machine, just liven the circuit.
I live in an area of the northeast that would not allow construction on any land with land greater than 2%. This is to control stormwater. Once again Peper Towing, and tinman and recoveryman have done it again. I love how professional Your team is!
What , no construction on land above 2% grade?
You should double check your numbers
Rules of the NYC DEP, upstate NY is the watershed for NYC. They don't want the city water contaminated. Conn is similar no steep slopes.
If your on a slope the development will also be very expensive as you have to keep all stormwater on your property with Detention Ponds
I love how Alex loves to troll the keyboard commandos. Y'all have fun and get sh*t done.
It’s the equivalent of a barking dog ready to bite the moment the fence opens very docile . People only talk trash because they are behind a computer screen . Then you write something back and they report it 🤣🤣🤣
Good job bro's, I like watching recovery videos and watch you guy's overcome all of the challenges of the particular recovery, no two recoveries are the same. You use all of the knowledge and skills you have collected from previous jobs.
Very nice towing rig you have to, modifying the rear axle to raise up is really cool and fantastic idea.
Thanks again.
Sometimes it's all about Brute Strength *AND* 42 feet of boom!! You and Alex handled that one VERY well!! At least it wasn't another stupid crane, LOL!! Be safe out there.
Absolutely amazing!
"swimming pools...movie stars!" LOL!
Cement ponds!
@@April8989 Expensive cars!
Incredible job rigging. That seems to be 80 - 90% of the job. You two make a great team, sharing ideas, etc.
Thoroughly enjoyed this video. Maybe Dr. Phill will show the videos he made on his show. I kept looking for Jed Clampet, but didn't see him anywhere. Thanks
I was hoping for Elly May myself.
Wow that was an insane crazy upside-down recovery guys… And on that freaking hillside just added to the fun…! Only on Pepe’s CZcams channel…!!! Good thing you had those wide Baileys straps…!Then 32:14 & up with the drone to get those awesome & fabulous sky shots… Awesome recovery Alex and Josh…!Josh, I googled Davies Dr. then added your shop address and it’s about 21 miles depending on which you go. I like doing that too… LOL
Impressive. Alex is quite the performer.
Damn! You guys have the most amazing equipment!!!
I operate a top-heavy backhoe, and my secret on steep slopes is to never go fast. Stay at idle and pay attention to keeping the machine from getting close to what you already know is the tipping point of your machine. That is a very steep slope though. Good job of getting the machine back on track again.
The Dream Team, Josh and Alex, on the job again. A very awkward job, well executed.
Shit man the real estate reports and pretty funny 😂 but watching yall plan to rig it ! Pretty impressive
josh you and alex are the perfect team,you guys just flow perfect with each other on every job.your dad should be so proud at the amazing jobs that you both get done.serious talent by both of you.are you and alex related?since i found your channel every episode i have seen is awesome.
Unbelievable work! Now you have Flipper doing side mountain work. Stay safe all.
Dam, what a nightmare, I am a contractor in Orange County and Stopped working in Laguna Beach due to the hills just like this, tight corners, no parking sketchy access and code enforcement watches and tickets for everything
I don't blame you. What did you used to drive? The 10min drive from a big street, up to this site, is ridiculous. You have tiny windy streets with cars on BOTH sides ready to sue if you even touch their stuff. That's where the rotator comes in handy vs a big crane. It's right but we can make it work going slow
just f250 but we had dump trailers and they were a nightmare on those hills.@@PepesTowingService
Why you dont pulled to the street is flat ground
Too many not knowing anything about the machine involved makes too much confusion.
Another sketchy job. You make it look like child's play. WOW!!!
Excavator for sale! No delivery, must pick up yourself 😎 Your recovery skills are fantastic!
People coming around the curve see all the lights and think a spaceship had landed. 😳👍😆🤣😂
Could Hulk have lifted back end of flipper high enough and rotate to get it started on hillside and then drive in reverse for distance up hill ?
Or drive forward, uphill?
Looks like another challenging recovery
People are complaining about the operator, he taught the excavator a new trick, roll over and play dead.
Josh and Alex - always getting the interesting calls. At least it was easier than that flipped over crane.
Good afternoon from Southeast South Dakota
Alex, that was art, bro. 🤯👏😌
Always impressive! Wow!
I miss seeing your dad though.
yo Josh 1.2 Million LFG!!
Top team cope with ease despite the problems they faced, well done guys great to watch.
Do not know anything about this kind of machinery. I do know it takes skillful experience to do these kinds of jobs. Love the videos❣️👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Steep Angle on gravel to be hauling up slings, chains, shackles etc and then recovering it down to a distance where you could lift it! Great job guys, well done 👍💕🇮🇪
What I appreciate more than anything else in this video is the total lack of screaming and shouting. Professional riggers take the time to THINK before they speak, and it is refreshing to see a video showing that. Thank you, Pepe.
I loved how there were not eight people at once telling how to fix it.
You guys never seem to amaze me always doing a wonderful job I love it say hello to papi chulo JOE ❤️🌹💯oh yeah no Jeffrey today
Alex, the mountain goat! Climbs it all. Thanks guys.
Mr Josh That one had me sitting on the edge. Awesome video. Stay safe
Amazing, dragging & swinging 33,000lbs off that hill, you guys rock!
Super job on the recovery. I was worried that when you got it up righted it would roll down the hill. But as usual you guys handled it.
Excellent job fellers! I was a little nervous about that man who kept standing on the down hill but I'm sure it was just the camera angle😊
I’m glued to your channel, I’ve learned so much, thank you
That was a really difficult recovery....As i always say Josh and Alex can do it...great video guys... stay safe and see you on the next one
Gotta give these guys credit, they know what they are doing. Good job guys!
That's a great job of rigging and working toghter. Amazing
Thank you for sharing this God bless and much love and respect 🎉😮😅
Found that exact spot on google earth!! Excellent equipment excellent videos!!
Nice job. That was a complicated bunch or work. You men work well together.
Geographically, that isn't Beverly Hills. About 300' NW of the Beverly Hills border. If the house was in Beverly Hills proper, add another 20% to the already crazy house value.
Interesting, Google Maps had that intersection as Beverly Hills. Still crazy crazy expensive for what I did see. Not even kidding, I was curious and a smaller 3 bed run down "fixer upper" was going for 3 MILLION!
About ten years ago I was an operator of a 200 Excavator that was delivered to a very special site that supplied drinking water to a BC city with over 1 million population. The driver who delivered it while unloading it did it very wrong and dumped it upside down spilling diesel, hydraulic and motor oil. Not a very pretty scene . This video hits close to home .
Well done. Again, I'm totally impressed. Very fun to watch. Thanks.
That slope is going to be a disaster in the next storm
Mudslides fire
The excavator needed a belly rub.😂😂😂.❤
Great Technical Recovery! Awesome job guys...
Owner: "Hey. Please don't scratch it!"
Too bad the tracks couldn't have been squared up with the cab.
Y'all have been getting some challenging calls here lately great work
Buen trabajo, el terreno estaba muy inestable, buen video, JOSE, ALEGANDRO, buen royo.💪👍🇪🇦🖐️👏
gracias tio
way to go Alex. good job boys
Professional work,great job!
Extra care to prevent further damage, … that’s how it should be done!
That was incredible to watch.
Great job boys!
Awesome rescue. Top-notch service men & equipment. Congrats! 👍
Thank you
Now, THAT was a recovery. A mechanic can check the fluids, grease the pivots & back to work!
Josh I do love your videos ! Been watching for the last 3 years ! There's no job that is impossible for you guys ! Peace Out !
Ok I'm in put some oil in the machine and started up or disconnect the two boom lines I love the show😂😂😂😂😂😂
Said it once, & will say it again...best damn recovery team EVER!
Thank you
for those who dont know big flippr pivots at the drive axel to the rear all other axels before or after are subject to massive side ways forces during sharp turns r thats why big flipper has an air lift rear it reuces the sideward forces when turning tight corners making it easier to turn it has no effect in a straight line except to reduce the weight per sxel the tag will help reduce tonnage per axel slightly its a mathematical and physics bit of maths as the greater number of axels the lower you can get each axel weight in tons alot is done in the vehicle build because you have the service lockers tools and equipment the rotator itself all this has to be calculated by the body builder to allow even loading of the axels / antway god going lads on s difficult job
Great recovery, that machine could have slipped any time ,the right tools the right crew job achieved ❤love from Ireland 🇮🇪
you guys have a complete understanding of your gear and the cause and effect of every move you make ...amazing to watch ...well done Alex and Josha , a great recovery to watch.
To move any part of that arm, it would be best to have someone at the controls to open the right valve. The pressure from the winch or gravity will force the fluid out letting the bucket close.
Great job guys and the rigging was fantastic.
Wow, amazing job under really tough conditions. you guys are the best.
You can tell that those guises take pride in their trucks absolutely beautiful prices of machinery
I just found your channel today, AMAZING!! I’m addicited.
poor hulk, just sat there, looking Pretty