You can use any kind of cooling oil..used or new..it will work. After doing the entire process put a small drop of the fuel into water..if it's good you will see rainbow colors appearing in water , just like diesel in water.. of not..then there was not enough reactant.
The vegetable oil will turn into bio diesel when it reacts with the sodium hydroxide and methanol. Then it will saperate out of the solution in 24 hours.
Try using it in some kind of diesel generator or something..some other diesel engine... When poured into water it should form rainbow colored oil films over water just like diesel..if all that checks out you are good to go..to be really sure, may be try it on someone else's car may be..😂😂
😂 will do. My goal is to sell it in large batch One question, my lye doesn't completely dissolve inside methanol, is it normal? Can i keep the lye and methanol mixture somewhere for later use or it got short shelf time?
Hello nice video! helped me a lot! i didnt knew i have to mix the NaOH with alcohol, I will try it out now! I use algae to make the diesel! thank you very much!
@@anonimoqualquer5503 concentrate the algae so the least water possible and when I mixed NaOH and alcohol together and put the solution to the concentrated algae. I had an oily liquid which is flammable as candle.
If there is 10 pounds of oil, you need 1 pound of methanol to fully react with it in the presence of sodium or potassium hydroxide catalist. It is always good to use a bit excess of methanol so that you are sure it is fully reacted.
@@CreativeLabStudio are the proportions any different when using ethanol instead of methanol? I understand this will be estrification instead of transestrification?
The reaction is faster when using methanol. When using ethanol it takes like 48 hours or more to fully react.. I haven't tried making biodiesel using ethanol so I'm not sure about the proportions to be used.
@@CreativeLabStudioand have you tried using sulfuric acid as catalist? It can also be used as, in my case I use it as catalist to produce ethene gas from ethanol, aluminum oxide works as well but it requires to be heated to work
Heating the oil is makes reation go faster. Without a thermometer it is hard to know the exact temperature..but you can heat it till you find it really hot to the touch.
@PushpendraSingh-zi6qr you will have to mix the ingredients in the right quantity and leave it to fully react and settle out for 24 hours..so heating or not heating.. there is only little difference.. By heating you can get a complete reaction with the right proportion of ingredients..without heating you might need to use a bit more of alcohol maybe..
@ZarawarKhan-gs8hr I am no expert in oil related stuff. I just found out about this biodiesel on the internet and tried it myself and it worked so I made a video that's all.
In general, this was invented by sailors when a cargo of vegetable oil and alcohol became so full that there was not enough fuel in the butt due to the oncoming current
it’s better to carry sealed calcium carbide and a huge pressure cooker of acitelen for caravans in the fleet where, when the oncoming current runs out, all the fuel offers experimental options for the operation of the engine and the propulsion of the vessel
Fuel can be made from sugar. It can be fermented with yeast and distilled to make ethanol which is a fuel. But it is better to use just sugar instead of soft drinks. Cellulose are also used to make ethanol by using enzymes to break down cellulose to sugars and fermenting it to make ethanol.
It will be a good video.. but problem is that..it is illegal to distill alchohol at home in the country which I am in.. 🤪🤪 might end up in holidays behind bars.🤣🤣
75 percent alcohol should still work..but the amount of fuel obtained would change..Or you might need to use more of the less concentrated alcohol. 100 percent alcohol is really cheap to buy online.
@@jackmarsh7328 well it will be better if you could get 180 proof or 90% alcohol..as the water content increase the reaction will get really slow...try to get some alcohol with good concentration..
Old diesel engines like 1.9 TDI 90hp can work on clear sunflower oil.
What process takes place behind thi experiment
is the sunflower oil the normal one used for cooking ?
like of the fortune brand ..
You can use any kind of cooling oil..used or new..it will work. After doing the entire process put a small drop of the fuel into water..if it's good you will see rainbow colors appearing in water , just like diesel in water.. of not..then there was not enough reactant.
Hi, did you seperate distilled water and the vegetable oil?
The vegetable oil will turn into bio diesel when it reacts with the sodium hydroxide and methanol. Then it will saperate out of the solution in 24 hours.
@@CreativeLabStudio thank you for answering 👍
Hi, can we make bio fuel from Flowers waste ?
I have heard that bio waste can be converted into sugars using enzymes and then converted into alchohol, which is a fuel.
Hy, i managed to do it but too scared to put it in my car tank, is there any way to test if my biodiesel good to go?
Try using it in some kind of diesel generator or something..some other diesel engine...
When poured into water it should form rainbow colored oil films over water just like diesel..if all that checks out you are good to go..to be really sure, may be try it on someone else's car may be..😂😂
😂 will do. My goal is to sell it in large batch
One question, my lye doesn't completely dissolve inside methanol, is it normal? Can i keep the lye and methanol mixture somewhere for later use or it got short shelf time?
@@auliaalam4860 dissolve as much lye as you can.. I haven't tried tried storing it for long.. probably it is better to use the same day itself.
An old home, furnace burner set it up pump and watch the flame shoot out don’t do it indoors
Sir what alcohol is that .
Is it methanol
Yes. You must use methanol.
Hello nice video! helped me a lot! i didnt knew i have to mix the NaOH with alcohol, I will try it out now! I use algae to make the diesel! thank you very much!
😄😄..thanks for the support..
how you make diesel with algae? can you recomend a source of study?
www.sciencedirect.com/topics/engineering/biofuels-from-algae
@@anonimoqualquer5503 concentrate the algae so the least water possible and when I mixed NaOH and alcohol together and put the solution to the concentrated algae. I had an oily liquid which is flammable as candle.
@@klompex100 thanks mate
Hey man, I want to produce it at a large scale from used cooking oil and sell it!
Interested in a partnership?
Today you got a good business idea for free mate..the rest is up to you. Thanks for asking though..and good luck. 🤩😇
Yes i am
how much oil can be cleaned with this amount of solution?
If there is 10 pounds of oil, you need 1 pound of methanol to fully react with it in the presence of sodium or potassium hydroxide catalist. It is always good to use a bit excess of methanol so that you are sure it is fully reacted.
@@CreativeLabStudio are the proportions any different when using ethanol instead of methanol? I understand this will be estrification instead of transestrification?
The reaction is faster when using methanol.
When using ethanol it takes like 48 hours or more to fully react.. I haven't tried making biodiesel using ethanol so I'm not sure about the proportions to be used.
@@CreativeLabStudio Can I get your discord? YT is kinda stacky
@@CreativeLabStudioand have you tried using sulfuric acid as catalist? It can also be used as, in my case I use it as catalist to produce ethene gas from ethanol, aluminum oxide works as well but it requires to be heated to work
Should I add ethanol or methanol?
Only Methanol works good. Ethanol need some additional chemical treatment I think.
Hello will u make a biodiesel for me
I have done a detailed video on making biodiesel at home..you can follow that process it is pretty easy. ☺
Is there any way to identify oil is at 70 C without thermometer….is it necessary to heat oil.
Heating the oil is makes reation go faster. Without a thermometer it is hard to know the exact temperature..but you can heat it till you find it really hot to the touch.
@@CreativeLabStudio if I don’t heat it how much long will it take
@PushpendraSingh-zi6qr you will have to mix the ingredients in the right quantity and leave it to fully react and settle out for 24 hours..so heating or not heating.. there is only little difference..
By heating you can get a complete reaction with the right proportion of ingredients..without heating you might need to use a bit more of alcohol maybe..
Hey brother require ur help regarding some projects it is serious matter
Any time.. just ask
@@CreativeLabStudio just want to know about some oil related stuff to isilie agar aapka no WhatsApp wala miljaye to shi ho
@ZarawarKhan-gs8hr I am no expert in oil related stuff. I just found out about this biodiesel on the internet and tried it myself and it worked so I made a video that's all.
@@CreativeLabStudio muze pta aap expert nhi ho lekin kuch aisi chiz hai jiske baare me personally baat Krna zaruri hai bhaisahab
@@CreativeLabStudio bhai kuch zaruri baat biodiesel ki baare me hi krni hai request hai aapse
Made Molotov 😂
😜
Hi bro require ur help
Note:- it's important regarding something related
Any time.😄
Can we use ethanol as alcohol in this exp, pls tell as fast as u can!!?
Yes, you can use alcohol but then the process takes a little bit longer and heating may be required...just try it yourself in a small batch..
Love you
Thanks for instant reply
@@CreativeLabStudiolove you bro ❣️ thanks for your reply❣️😊
Any time.😊😊
Ethanol is better, because itnt deatroying surface od cylinder do much as methanol.
Hey. What is the propotion of alcohol eih NaOH to the cooking oil?
For one liter of veritable oil you need 200ml of methanol and 10 grams of NaOH. Usually more methanol is used..
In general, this was invented by sailors when a cargo of vegetable oil and alcohol became so full that there was not enough fuel in the butt due to the oncoming current
it’s better to carry sealed calcium carbide and a huge pressure cooker of acitelen for caravans in the fleet where, when the oncoming current runs out, all the fuel offers experimental options for the operation of the engine and the propulsion of the vessel
how to separate the fuel from the rest of the solution ?
You can use a small hose to siphon only the fuel out..👍
@@CreativeLabStudio tysmm
Hi i want to ask one thing from you
Yes, what is it..?
@@CreativeLabStudio can a fuel be made from soft drinks like Pepsi 🥤 cola 🥤 any other sugary drinks.
Fuel can be made from sugar. It can be fermented with yeast and distilled to make ethanol which is a fuel.
But it is better to use just sugar instead of soft drinks.
Cellulose are also used to make ethanol by using enzymes to break down cellulose to sugars and fermenting it to make ethanol.
@@CreativeLabStudio why don't make a video on it will be very helpful also add the anti knock agent in the fuel
It will be a good video.. but problem is that..it is illegal to distill alchohol at home in the country which I am in.. 🤪🤪 might end up in holidays behind bars.🤣🤣
What happened if I don't use methanol or 200 proof alcohol. Is there any alternative for it?
75 percent alcohol should still work..but the amount of fuel obtained would change..Or you might need to use more of the less concentrated alcohol. 100 percent alcohol is really cheap to buy online.
@@CreativeLabStudio so I can bought the regular 100 proof alcohol on the dollar store and just mix with sodium hydroxide
@@jackmarsh7328 well it will be better if you could get 180 proof or 90% alcohol..as the water content increase the reaction will get really slow...try to get some alcohol with good concentration..