Ditch Temu! 14 Cheap Tools On Amazon
Vložit
- čas přidán 14. 05. 2024
- After making my video on cheap tools from Temu, AliExpress and Wish, people had expressed concerns giving their sensitive info to these services. So I looked for some products that are there but now also sold on amazon. I started with 10 purchased products but Going Make sent me a bunch of items for free and honestly there are a lot of nice ones so I included them (full transparency)
1. Qiguch66 pocket hole clamp - $11.30 - amzn.to/3Tlp3iV
2. Fnicel - Precision pocket rule - $9.99 - amzn.to/4bXLFNT
3. Daydor bench dog clamp - $29.99 for 2 - amzn.to/3T3Wbu9
4. Vonzen Hand Jack - $7.99 - amzn.to/3P583uD
5. Goingmake corner clamps - $29.99 for 2 - amzn.to/49JBXgC
6. Zhonna Manual wire stripper - $26.88 - amzn.to/3P9cftC
7. Going make - concealed hinge jig - $49.98 - amzn.to/3IrwYFd
8. Jaocdoen Countersink Bit With Limiter - $7.49 - amzn.to/3wPz4vS
9. GOINGMAKE Shelf Pin Jig - $32.85 - amzn.to/4a1C86t
10. Yakamoz Self Centering Doweling Jig - $12.99 - amzn.to/4a2da6S
11. JCFANTS 3D Carpenter Square - $13.99 - amzn.to/3PbKzUZ
12. Going Make 3D Carpenter Square - 24.99 - amzn.to/3uZeHvJ
13. Going Make Thing Rip Jig - 28.88 - amzn.to/3P8x9sN
14. Going Make T-Square
12in - $25.98 - amzn.to/49HDqDX
24in - $49.99 - amzn.to/3TnryBs
32in - $59.98 - amzn.to/3V8YJdm
We are a new channel and would eternally appreciate if you like our content to like and subscribe so we can continue to make great content for you! You can subscribe at / bitnerbuiltwoodworking
FIND ALL MY TOOLS HERE! My amazon Influencer store! #Commissions Earned
www.amazon.com/shop/bitnerbui...
As an Amazon Influencer, I earn from qualifying purchases
Contact us for business inquiries at: Justin@bitnerbuilt.com
Like us on Facebook at / bitnerbuilt
Now On Threads @Bitnerbuilt - Jak na to + styl
Justin, my first visit to BBW. Very impressed with your calm, easy to follow descriptions. Your commentary and critiques provided guidance that was easily digested. I’ll be back…
oh that's great to hear thanks mark!
Video quality and sound is great. I did enjoy your comments on the tools that you were showing. For the most part they were decent quality and helpful in the shop. Not all tools have to be expensive, good job showing us the tools of the trade.
Oh great thanks so much!
Video quality is brighter and clear than previous videos.
Ah cool good to know thanks!
At what resolution are you watching, because the 480p and below is a bit grainy and lagging, that could be because of youtube's transcoding though!
Great reviews, straight forward, no nonsense ,not holding back to good , bad, or "ugly " and in-between.
(from the uk)
Thanks!
Video looked good to me. Your reviews are excellent and as a result you are my go to source for guidance on tools I think I need. Thanks
Oh wow thank you so much! Always try and give some good honest feedback
Video was/is fantastic. I love the way you explain quality, price, and functionality. Glad I found your videos
Oh wow, thanks so much!
Video quality is excellent! I bought the Going make concealed hinge jig recently, haven't used it yet, but I was very pleased with the quality of it. Thanks for the excellent tool reviews!
Thanks and good to hear the same on the quality of the jig!
Justin, my only surprise is that you don’t have 100k viewers already! Your presentation is second to none, concise, clearly spoken and always good content! The video quality is as good, if not better, than I have seen any where else on CZcams! I for one hope you will continue to for many years to come! Keep up the good work! Len (Devon 🇬🇧)
Wow thank you Devon! Very kind of you! ✌️🇬🇧
Liked and subscribed. Found your presentation relaxed and refreshing to watch. For some reason no comments box, so jumped on here. 👍
Yo
Ditto!
Just watched and subscribed. Love that you don’t go on and on about yourself and other repetitive stuff. YOU PREPARE. AND companies like woodPECKERS charge ridiculous amounts for their products. I couldn’t comprehend why it should cost so much, now I know it doesn’t have to, and I can afford some gadgets that would be helpful without feeling ripped off and angry. Thank you very much. Woodworking is expensive enough.
Thanks! Yea I personally “can” afford all the big expensive stuff but honestly you feel that you have to treat them carefully since you spent so much, there are lots of good reasonable options out there!
Video quality great. Very clear, colours awesome and sharp. 5hanks for showing the tools and giving a honest review.
Oh cool thank you!
Another awesome blog... Thx!
The picture is really crisp! 🎉 Audio is also great...
Have a great day... Waiting for the next one 😊
Awesome thanks!
Video quality is excellent. Content even better! I am ordering several items that you reviewed. Very helpful, thanks 👍
Oh thanks very much!
Your video quality was already amazing but yes it is even better now. Thank you for everything you do!
Thanks so much!
Thanks for the tool review, certainly very helpful. Your new camera equipment quality looks really great.
Oh thanks so much!
I think the video quality is great. Thanks for buying and checking out these affordable tools.
Thanks very much!
Lighting is awesome, audio is great, really nice video and enjoyed the content. Thanks Justin!
Oh sweet thank you very much!
Nicely done. Very nicely done. Helping an SIL with some work. Going to purchase some of these and leave them with them. The balance I'll purchase over time, so as to not overwhelm him and/or her. Thank you very much. Would love to see more if you have time.
The quality of the video is top shelf. Thank you for that as well.
Thanks very much!
Everything is very good…video, sound, lighting and content. Thanks so much!
Oh awesome thanks so much!
Brilliant channel and top notch quality! Look forward to more of your stuff. Cheers 🇬🇧
Thanks Brian!
Justin - video quality is very good. Combined with great lighting, it sets a great contrast in your shop. BTW - I like the Going Make brand of tools. A lot of bang for the buck!
Oh, thanks very much. Good to hear! Yeah, I wasn’t familiar with them before and I was hesitant about showing that many tools of theirs in this video because they were provided but honestly you can’t go wrong with milled aluminum stuff. I like their tools as well and some good creative additions to their designs others dont have
Great presentation, very informative & detailed to the pros & cons of each item! Excellent, well done!
Thank you kindly!
Very enjoyable video and I learned several things from it. I like your delivery and pacing. Thanks for sharing.
Glad you enjoyed it!
As always a pleasure watching you. The quality of this video is very good, I enjoy watching it on a 100” projector screen, feels almost as being there in your shop 😅
lol oh wow think I need to loose a few pounds before being on the big screen 😂
Excellent lighting and video quality. Sound is natural. Good job on reviews.
Much appreciated!
This is the first video I watched from your channel. when youtube fed me your video, I immediately noticed how bright and smooth the video is. 60fps is great. content was excellent and I like your soft mellow style. good job!
Oh awesome great to hear! Thanks so much!
Thanks for the tool review. The video quality was great!
Oh awesome thank you!
Great video quality,very helpful and informative as always. I am tempted on some of those options? Thanks and stay safe.
Thanks!
Thanks for the tool overview. I'm glad you included some duds. It's useful info when browsing junk, but also makes it clear that you're being thoughtful. Suggestion: on your amazon page have a list of your video stuff: mic, camera, tripod, lights, etc. Thanks as always.
Thanks! Yea I’m not a rubber stamp guy, even good tool companies have some duds!
Excellent video - concise but very informative. Added to my subscriptions list.
Awesome thanks so much!
Fantastic video quality. As a beginner woodworker, the inexpensive tools will be purchased for "learning." It's always good when someone else does the footwork for ya. I will be going to Going Makes for some of these. Thanks
Thanks! Yea definitely quality for the money
Not the first good review I've heard of GoingMake over the past few months. Definitely going to have to check them out.
Thanks for the reviews. I like your no-nonsense, practical approach to these sorts of videos. I don't feel like I'm being sold something, just told about it.
Thanks! I appreciate that. Yeah I’m always conflicted when company send me stuff to then promote it but honestly you can’t go wrong with mild aluminum for tools with durability and precision and a reduced price so I really have nothing but good things to say about that company honestly
Camera looks good, sound is great too. Keep up the great work, and thank you for the effort!
Oh awesome thanks!
Great picture quality! I appreciate the reviews also.
Thank you!
Thanks for sharing this information. I’ll be looking for other videos of yours👍
Thanks so much!
I am a 1st time viewer and am very impressed with the content. Thank you Justin
oh thanks so much Bruce! appreciate it!
Excellent sound and video quality. Also good information. I'm a fan!!!
Awesome, thanks so much
Video quality is great, no worries there!
I like those goingmake corner clamps and the concealed hinge jig. Adding those to the arsenal.
Thanks! Yea they are some nice kit!
First time watching, great picture quality and fantastic tool review.
Oh awesome thanks so much!
My 1st viewing & you are explaining things very well !
Oh thanks so much!
Video quality. Rey good and thanks for the info on going make tools.
Awesome thank you!
Nice video. Great content! Thanks for the in-depth reviews.
Thanks very much!
I think the video quality is great. I watch on a 55" computer monitor and you look fine. lol. Another great video, love that cup hinge jig and ordered it. Keep up the great work. Thanks for all your research and information. All the best...
Awesome good to know! Yeah, that really is a nice one, when I took it out of the box I was like yes! The built-in clamp is going to keep me from being lazy lol
Excellent picture, good reviews. Thank you, Justin!
Awesome thanks!
Great tool review! Video and sound quality is great!
Glad you think so!
This is a great video. The picture quality is far better than most and everything is easy to see due to the positioning of the camera. I found the content was very interesting, even though I wouldn’t use many of the tools reviewed. But I did watch it to the end because the presentation was done so well and its an interesting topic - things to look out for when buying such tools And thank you for not using music or trying to be a comedian. 10 out of 10 for this one. It’s only the second one that I have subscribed to though I’ve watched hundreds.
Wow thanks so much for the kind feedback!
You video quality is top notch and so are your videos keep up the good work.
Awesome thank you!
The picture quality and sound are great! Thanks for the info. New subscriber here.
Oh awesome thanks so much!
Video seems sharper, also, great content on this one. Will probably pick up a few of the items to try for myself!
Oh cool, thanks so much!
Enjoyed your video, quality of video (resolution) is sharp, well light, sound quality is excellent.
Glad to hear it! Thank you!
video, lighting and sound were very good. the selection of cheap tools is also very good, several were interesting to me.
Oh that’s good to hear and thanks for the video feedback!
Really great video, first time I’ve seen this in the UK.
Oh awesome thank you! Always appreciate my views from over the pond so I do all my build videos in metric and imperial 😃✌️🇬🇧
Video quality is very good; the tool selection was excellent.
Awesome thank you!
Loved the video. Only one tool caught my attention...the corner clamp. Many times I could have used the ledge feature.
Yea the extra hand that gives you is 👍
First time I’ve seen one of your videos, great video
Oh awesome thanks!
I really like the new camera setup. Makes for a more professional content. I like your not bashing the not so well priced but well known products. Pretty even handed were your assessments. Thank you for your video.
Thanks so much!
Excellent quality and loved your comments
Oh thanks very much!
Great video review (with really good video picture quality)~! ;-) I've been a frequent-flyer buyer from "big red" and I'll definitely be picking up some of the GoingMake products. I'm also a fan of the big blue label, but I like that European hinge jig. Since I don't own one yet, I'll be going for the one you showed. Thanks for this one~!
Oh awesome thank you! Yes that hinge jig is very nice, that company is making a good converted effort to make durable cheaper items but also innovate on the designs so I think they will be a player going forward
Great video Justin I have purchased one goingmakes tee square and it’s a great tool and going to buy the thin Rip jig next they are some great tools glad to hear your opinion on them. As a new woodworker can afford them other Red tools. The video quality looks great and the sound was great too.
Thanks Jim, glad to hear you like it as well, honestly putting them next to my reds (I have a few) there’s no difference
great video. I appreciate the detailed reviews on the bargain tools. The video quality was great.
Thank you!
Nice video quality. I have the three piece ruler set, i agree they very good/useful tools for the shop. I also have the lifts, they are ok. Thank you for sharing. Everyone stay safe, warm, happy and healthy. From Henrico County Virginia.
Oh awesome thanks very much!
Hi Justin first time viewer. very impressed with your video picture is crop and clear,I will be a regular viewer from now on as I tho enjoyed the content.
Best wishes.
Ed
Sorry Crisp and clear Ed
Wow thanks Ed, appreciate it!
Excellent quality video . Great video review . Thanks
Awesome thank you!
Great vid fantastic picture quality😊
Awesome thank you!
First time viewer so can say that vid quality was great. I appreciate the attention to safety issues.
Oh great thank you!
One day, when I'm grown up, I'll be able to make videos like yours....👴👴 Great lighting, focus , sound quality, not to mention the excellent planning and narratives...👍👍👍
Haha well thank you very much, very kind!
Video looks great! And thanks for the tool review. Now I'll go spend some money that I hadn't planned on so I can save some money! 😂
Haha always fun buying new tools 😅 thanks!
Camera, personality & presentation are great
Wow thank you very much!
Justin, thanks a lot for good tools review and suggestions. Helpful as usual. About video quality and equipment... Well, not so good quality, but that's not because of bad equipment, but most probably not configured well. For instance, was a little blurry then it was as usual. Play with different configs. Unfortunately don't know which equipment you purchased, so no specific suggestions.
Thanks for the feedback yea I went from a iPhone which will have everything all in focus to a lens that’s going to give some depth and boca behind me, not sure if that’s the right decision but going to play with it a lot 😃
Video quality great, comments, very useful. Only just been offered your site, and considering signing up. now looking at your back video's, which should clinch the deal. Brian in the UK
Thanks Brian! ✌️
Video quality is excellent!
Oh thanks so much!
I already have the small 3D square and the countersink that I bought direct from China. I actually use the 3D square quite a bit as it works well to scribe a perpendicular measurement to an edge that I can use to line up on the crosscut or panel sled. The countersink works well and does a nice job making a clean countersink on laminate. It does clog up a little from time to time, but worth the $37 difference from the pro tool. Never had a problem with a snapped bit. Thanks for the other reviews.
Cool awesome thanks for the feedback!
Video and audio quality is excellent. I think you didn't go long enough. Looking forward to the sequel.
Haha thanks!
Video and audio are excellent very professional
Much appreciated!
Excellent, thank you. I enjoyed your comment on the plastic hinge tool that “the holes have got bigger because I have used them”. 😂 That is where you slipped up - you used them! The tool would have lasted a lot longer if you hadn’t.
😂 I know right how dare I use the tool lol. Glad you enjoyed it!
Good job…video quality was excellent.
Thanks!
I usually watch CZcams on my phone so I've never had a complaint with video quality, it still looks good.
✌️
I love my going make thin rip jig. You can even use it in T tracks.
Yea the additional attachments make it versatile!
Justin, I've never seen this Going Make brand, but after what you told us... It's definitely added on my list of what to buy!
Thanks a bunch for the review! 😊
Stay safe there with your family! 🖖😊
Thanks! Yea I hadn’t either but can’t go wrong with affordable milled aluminum 👍 often the cheaper isn’t better but they have some quality stuff
Very nice picture!
I also liked the edit when cutting the plywood. No micro jig.... poof micro jig :)
Like you said, a safe cut
lol indeed!
I liked the tools and the video equipment is working really good
Oh awesome thank you!
Awesome video, will definitely be adding some of these to my amazon wishlist.
With the self centering dowel jig, wouldn't it be more stable if you had it rotated so that the ball bearing's are held up against the wood in the same direction that the drill bit is spinning?
Thanks, I tried it in both directions, but just adding a ball bearing on there means that it has easy movement any direction. Some people had made the suggestion to use a punch or a Brad drill bit so it has that small little spike, that helps prevent wandering, even in normal drilling situations
Simple solutions to 2 of the tools. First one, the dowel centring jig. Scrap the bearings, they are only complicating the tool, simple friction pegs. Secondly, the 3d square, much like the overlooked scribe on a sliding combination square, the peg could simply thread into a dead space on the tool. Hope this helps. 👍🏼
Thanks Mike yea I said the same to them on the square, needs a home (but one out of the way!)
Thank you for the video. By chance, have you come across a shelf pin jig sized for shelf pin sleeves?
Not specifically but it hasn’t been super on my mind. I’ve used them only one time and know that you have to use a 9/32 inch drill bit (at least the one I used) and I just checked the going make wouldn’t take that. I’ll keep an eye out! I just used the regular jig and then went back and re drilled but obv not the best solution
Very nice video work! Would like if you can make more close up videos of the tools.
Will do. Thanks!
Hey Justin. Thanks for the useful content. Video quality seems fine. I was happy to see you address T squares because I can’t go with the big red company prices but disappointed you cut and ran so quickly. I’m assuming since you gave them a thumbs up the construction and accuracy was spot on ?
Yeah, I didn’t want to make it the going make video, you know, since those things were sent to me. Yes, definitely thumbs up, all three squares. When I did set up at the table saw came out perfectly square and flat. I always set those up using the miter slot on the table saw so you can make sure that you’re perfectly square over the long distance, before you torque down the assembly screws.
@@BitnerBuiltgreat! Thanks for the response
Thank you for another excellent video
Glad you enjoyed it
good video, both image and sound, and content
Many thanks!
Video looks excellent! As a gaffer I would say I would love to see a side light somewhere on your left side to help differentiate you from your background-there’s a lot of tan in your shot! Very well lit, just a suggestion ☺️ Great content, great upgrade! 👏🏼👏🏼👏🏼
Oh awesome thank you very much for the feedback, I have 6 ceiling mounted soft boxes around the shop to light the different work station shots, I can definitely rotate one on the left over to cover the left as well 👍 appreciate it!
Video seems fine to me. Thanks for doing this. I often wonder if any of the cheaper off brand tools are worthy.
Great, thanks! Yeah, with the cheaper stuff it’s always a hit or miss as I tried to show in the video, too, I really do feel, though that a lot of the tools that are made out of mill aluminum are really great in precision and quality, and aluminum pretty cheap so it’s hard to go wrong there
Another great video. To be honest, at my age and health, as long as it is focused I really don't notice the difference between high and low quality cameras.
I would like to see more reviews on Goingmake tools. There's a lot of buzz about them and their prices.
Thanks! Sure thing 👍 what I like about them is they aren’t just doing the cheap copycat thing, they are producing a durable product with unique features.
Video quality looks great.
Awesome thank!
O yea, good video and sound, very professional looking.
Much appreciated!
For your doweling Jig, what if you tried to put a rubber pad/ gasket on the wood side of the jig. That might add a better grip/ non-skid while you are pressing down and drilling. love the video, thanks.
Thanks and good suggestion a few others suggested using a Brad tipped drillbit that has a spike on the front of it, which would help with the wander
only one quick note, on the self-centering dowel jig (at least in my experience) it helps to use a center punch, marking knife, etc. to give yourself a dimple to reduce wandering. otherwise great video, definitely subscribing 👌
Great tip 👍
Great video. Always looking for good knock offs. I think you erred on the dowel rod jig. Once you put the clamp on it you can no longer drill your hole because the clamp is in the way. I wonder if a different style clamp would work? If not, this jig is useless. Keep your content coming. I like your style. The video quality was excellent!!
Thanks! Hmm no on the dowel rod jig I clamped it on the side wing and didn’t obscure the metal drill bit collar so works fine (just tried it)
I really, REALLY hate videos like this. Because they make me want to buy more tools! Seriously, a great video, showcasing how those of us not made of money can get quality tools at a bargain price. Just subscribed, and I'll look forward to more content.
Haha my apologies to your wallet! Yea I’m a firm believer that there are great tools at all price points just need to find them!
First time viewer, loved the content and your input on the tools. I was a breath of fresh air not having someone shove expensive tools down our throats. Thanks. Oh, the video quality was great.
Oh awesome, welcome Robert! Yea I’m a bit proponent of every tool brand has some winners and losers, it’s fun to fine the winners that don’t break the bank! Thanks for the video quality feedback!
Looks great lighting clarity video
Awesome thank you!
Thank you for taking a look at these budget friendly tool options. On any of the tools that are meant to act as squares, did you evaluate them for square? Its great that the big t square is more than half of the red tool brand but is it as accurate? Thanks!
Yes it is square! Sorry I kind of tried to run through the last few a little fast because I didn’t want to make it seem like it was the going make show! I always check my square especially long ones with the miter slot on my table saw, they are adjustable with the screws and came out flat and square 👍
@@BitnerBuilt Great! Thanks for the quick reply.
First time viewer. Video quality is very good.
Thank you so much 🙂 and welcome!
The quality of the video was excellent. I was thinking about the centre finding jig. If you were to use a s centre punch with the jig and then drill, would that stop the drill bit slipping?
Hmm prob, you would need to punch first prior to placing the jig, but definitely clamping best. Thanks for the feedback!
I was thinking brad point bit, as they have far less tendencies to wander...