Build a DIY RC Car with Steering Under $20
Vložit
- čas přidán 29. 11. 2022
- In this video tutorial we build a basic Remote-controlled Car out of PVC with steering on a budget. This DIY RC Car build is technically the heavily-improved version of the first RC Car I made in a popular video from 2019. A handful of you in that video had good suggestions as to what to improve on the car, so I took note and came out with a completely new Radio-controlled car by my design!
The car operates on these $5 40mHz toy-grade radio communication boards giving it an operating range of 10-20m, has 4 channels of control, and uses a 6V battery pack that'll last the car up to 2.5 hours of run time.
The DIY RC Car chassis/frame is fully handmade out of PVC.
The car achieves a speed of up to ~2.5m/s and is belt-driven by a 180 brushed motor with its 3 pulley wheels, implementing one for added torque and also features the homemade Self-centering steering mechanism unit that returns the wheels back to neutral position every time.
➡️ Before MAKING, please WATCH the previous video about its DIY Steering mechanism: • How to make RC Car Ste...
Previous DIY RC Car (easy) from 2019: • How to make a Simple R...
----------------------------------------------------------------------
TS80P Smart Soldering Iron by Miniware - www.amazon.com/gp/product/B0B...
For more details about the TS80P - www.miniware.com.cn/product/t... Miniware's official site to see the full selection of the quality tools they offer - www.miniware.com.cn/
----------------------------------------------------------------------
👉 Visit my online Storefront: sites.google.com/view/maximag...
----------------------------------------------------------------------
☕ Buy me a coffee: www.buymeacoffee.com/MaxImagi...
----------------------------------------------------------------------
Instagram: @max.imagination - max.imagina...
Instructables page: www.instructables.com/member/...
----------------------------------------------------------------------
Car's Blueprints - drive.google.com/file/d/1-hGo...
Circuit diagrams - drive.google.com/drive/folder...
Disclaimer: Amazon purchase links below are affiliate links. It doesn't cost you extra to buy through those and I just get a tiny commission. Thank you!
Materials and parts needed for this project with links (Cost = $20 USD only including parts used)
RC 40mHz Tx and Rx boards - amzn.to/3VeS5SW
Drive motor 180-type - amzn.to/3JjdJPn
Pulley wheels, Rubber belt/band, and car wheels from Gear Kit - amzn.to/3IeMR35
(x3) Dual AA battery holder trays - amzn.to/3Uizhhl
(x6) AA Alkaline Batteries - amzn.to/3Zqk29t
ON/OFF Rocker switch 3A - amzn.to/3iqzJg1
(x4) Momentary pushbutton switches - amzn.to/3AVJlpH
Micro slide switch SPDT - amzn.to/3Fdfewh
330 Ohm resistor + LED from Kit - amzn.to/3XIlOlR
(x2) Perf Prototyping boards + Soldering Lead, pin headers and more in kit - amzn.to/3ieX2cI
Bicycle steel spoke - amzn.to/3UdEZ40
Lollipop stick tube - amzn.to/3EPIuIn
Ballpoint pen tubes (Be careful with ink!) - amzn.to/3u9PVVI
M3 Bolts and nuts kit - amzn.to/3GZHELS
(x2) Micro screws for drive motor (taken from old laptop)
Car's wheels 2.8" (Slightly bigger) - amzn.to/423WkBN
PVC Drain pipe - Hardware Store
🪛🔧🔨 Tools and extra supplies I used:
➡️ Soldering Iron (Kit) - amzn.to/3X6L5Wq
➡️ Drill - amzn.to/3EDe0u8
➡️ X-Acto Hobby Knife - amzn.to/3XbL7ML
➡️ Screwdriver kit - amzn.to/3V6vgNX
Music credits:
Music from Uppbeat (free for Creators!):
uppbeat.io/t/matrika/overdrive
License code: YGND9NZTFI5CILU0
Music from Uppbeat (free for Creators!):
uppbeat.io/t/pryces/aspire
License code: DE2RRWYHY93V5IDG
Music from Uppbeat (free for Creators!):
uppbeat.io/t/fugu-vibes/spatial
License code: P4IZLPXSCIV2M1LE
Music from Uppbeat (free for Creators!):
uppbeat.io/t/mountaineer/mond...
License code: FIL9B5VKRUPAUPJ4
Music from Uppbeat (free for Creators!):
uppbeat.io/t/neozoic/sail-away
License code: 1UFLZTBCXUTIUGPL
Music from Uppbeat (free for Creators!):
uppbeat.io/t/hartzmann/paradi...
License code: 7G07DYNOZC9PJKB9
Music from Uppbeat (free for Creators!):
uppbeat.io/t/ra/let-good-time...
License code: I1X0PXFELEJAMBAM
Music from Uppbeat (free for Creators!):
uppbeat.io/t/hartzmann/bamboo
License code: YQFUFLHDZN5XGVYF
Music from Uppbeat (free for Creators!):
uppbeat.io/t/aavirall/gravity
License code: IBRXAPU95FOCIHP4
Other keywords:
make rc car at home, diy rc car parts, diy rc car from scratch, diy rc car frame, diy rc car drivetrain, diy rc car controller.
#diyrccar #maximagination #remotecontrol - Věda a technologie
He is the only guy to rival the Indian guy on CZcams.
Last
Ya
Hey dude, which one (btw I'm Indian)
@@bardeswati68 maybe he's talking about mini gear
Damn he's right
Im trying to build projects like these to impressive my parents.. one day they will be proud of me
You can do it!
This car is better than many toy cars they sell, it is more durable, and the best thing is that if it stops working, as the mechanism is not so complicated, it can be easily repaired.
Totally! Thanks for your comment.
Looks great, me and my dad will build it, because we don’t have enough money to go rc racing because my dad used to build rcs, and my dad said I have to figure it out myself and he will help me build it like I think it should be, this will really help, love the video!
I'm really glad to hear my video helped you... Thanks for your kind comment! 👍
No problem you deserve it.
Great project Max! Congratulations.
Hey! Thank you! 😀
Brilliant video, Max. Great step-by-step guidance using basic components. Excellent 😊👍
Thanks a lot, James! I appreciate hearing that 😁
@@MaxImaginationremot control car kisi bhi remot se control ho sakta hai kya
what type of spring did you use
Super cool, Max! Great build. Excellent tutorial.
Max hats off 🙇🏼♂️
This is extraordinarily cool
Thank you! 😀
its so nice that you should make a kit that everybody can buy and build and all the parts come in a box with build instructions
😀
Would be my dream type of product! Maybe one day I'll have such a kit...
That was so clean
Finally came across a great diy / creative project ... I do enjoy the simplecity and cleanliness of this project ... This guy never dissapoint to provide with us his good content!!
Loved it!!
Thank you so much!
This guy is just like me. Take a idea and make it a reality. That is a true DIY projects. Looking forward to more great videos keep it up
Thanks a lot! 😃🙌🏻
Awesome project, congratulations for the job, you are the guy 😁🤜🏼🤛🏼
Thank you, Tiago! I appreciate your support 😁🤜🏼🤛🏼
Very inspirational, great job with the project!
Thank you! I appreciate that!
Incredible 🎉,this is amazing ❤❤
Nice video with details, thanks for sharing components and schematic details, most videos don't show schematic,
I appreciate that! Glad you found my video and info helpful... Stay tuned for the upcoming project!
this is sick
Nice Work Man! Especially Chassis work!
Thanks a lot, man! 😀
Clean and crisp explaination
Thanks for your positive feedback!
I love this.
Really creative project, mesmerizing work! Congrats bro.
Thank you! Cheers!
Very good work max 👏🏾
Thanks for watching! :D
Perfect timing. I was just working on a build with your return to center steering method
Sweet. So cool to hear!
Luv this guy 😇
Great job Max!
Thank you!
I'm watching from sri lanka and highly satisfied with the content keep up the great work dude
Thanks so much! Will do! :)))
Wow!! That’s amazing 😍😍
Thank you, buddy! 😃✌🏻
Amazing creation max🎉
Thank you, Astr0! 😃
Pretty cool design🔥
Thanks, Kristoffer! 🙂
Awesome Max!
Thank you for commenting!
Another great video.
Thanks for watching, John! If you enjoyed this video, then you may like my latest one: czcams.com/video/Ul0h5Maeoeg/video.html
👍👍 I always love all your inventions
Thanks for watching! :D
Very nice work, great thanks
Thank you! Cheers! 😀
Thats amazing, I always wanted to get into something like that, but bigger for kids in my neighborhood to ride! But I have no time to spend years learning, and no clue where to start. My sister has cancer, and she's always wanted her own car, but can't drive because of some other health issues. I promised her I would make a small car for her one day. Its sill a wish I hold onto but struggling with my own mental have failed to complete. Your awesome man, really, I am sure you work hard on all your videos, amazing.
Thanks for your appreciation! Some great channels to watch when starting electronics would be GreatScott and AllAboutElectronics. Cheers.
Superb
One subscriber from India ❤
Glad to have you here! Cheers!
Nice video I was really inspired by you . Cause I've stuck with my own project but thanks step by step guidance I was able pass the difficult stage
Glad you found my video helpful! Thanks.
Very good. Enjoyed the diy base.
Thank you! Cheers!
Great job
I will build this with my dad, this is very cool
Great! Happy making!
I was going down the PicoW route for DIY build for my printed 1:32 scale cars but liking this a whole lot more. Nice work!
Glad you like it! Thanks for watching!
Cograts bro for your video,you are so creative!!!
Thank you! Cheers! 😀
I liked it!. 💪🏻💪🏻💪🏻
Great work and car! Cheers! 😀👍🛠️
Thank you! Cheers!
Awesome bro..I also made this type of car 🚗 when I was in middle school..It's really Awesome 👌🏻
Thank you, Adil! Oh cool, one of the cars we all at least have had fun with as boys 👍
Make a remotecontrolhelicopter
Where did you find the pvc so thin
Bro, I am very inspired by your idea Thank you very much
Thank you for your kind comment!
Dude, amazing.
Thanks a ton!
VERY GOOD
Underrated
Great job. I'm going to try this with the kid's 👍
Enjoy! Thanks for your comment.
I'm your biggest fan
cool car
awesome thoughts & brilliant excution for under 20$, keep it up mate 👊👊
Thanks! Will do!
Your so amazing bro.❤
Good rc car
Just discovered the channel, such a good one!
Thank you for joining!
Fantastic 🎉
Thank you, i will make it too
Excellent video! I'll make one!
Thanks for your comment. Happy making! 👍
Nice a cheap RC car video this helps with my project for class I have to take a item from a video game and see how viable to make one in real life my is the little robot from rainbow 6 and cods rcxd and this helps me alot
Wow great work
Thank you! 👍
@@MaxImagination hi I do work like this but mine alwats use get spoilt fast pls can i jave ur email
Amazing 🎉
Thank you! Cheers!
Nice. I could probably incorporate this into a $2 1-24 scale Audi R8 model I wanted to convert to RC. Perfect option to not blow the budget❤❤
Glad my video has helped... Happy making!
Thank you so much for inspirinf me
It's my pleasure!
Great video
Glad you enjoyed it!
@@MaxImagination bro i think i got your adress isn't it
Print Map
© MapTiler © OpenStreetMap contributors
ZIP Code 37217
Post Office City: Nashville, TN (View All Cities)
Neighborhood: South Hermitage|Antioch
County: Davidson County
Timezone: Central (3:13am)
Area code: 615 (Area Code Map)
Coordinates: 36.11, -86.66
ZIP (~5 mile radius)
??? dont worry im in the middle east but come on
Amazing video Max 😃
You always come up with new methods of making
Would like to share it with my subs 😁
Thanks a lot, Sahil! Your kind gesture would make my day. Thanks :)
Good video,thank you
Glad you enjoyed it. Thanks for watching!
Good brother 💙
Thanks! 🙂
Nice project! :)
Thank you! Cheers!
Amazing build! As always, I'm impressed with your build materials choice, so anyone can repeat your build!
Also, you can try to add ESP camera from your previous video, but I'm not sure if the video feed latency will be comfortable to use it.
Thank you so much! Love hearing the support from viewers such as yourself, it makes my day.
About making the car First Person Vision (FPV) Geared, sounds like a cool thing an Arduino-based RC Car could have. Cheers!
@@MaxImagination You can mount a stanalone fpv module (camera + vtx), goes for around $30
Nice project 😃 simple and with some quality rc toy. I think it is a good base to upgrade but the goal is doing it cheaper. 5🌟🌟🌟🌟🌟👏👏👏
Many thanks for your comment!
Wow man your going to be the next elon musk I am not joking 🔥🔥🔥
don't insult him like that
nice job
Thank you! Cheers!
Amazing
Thank you! Cheers!
You remind me of Grant from the king of random
R.I.P legend
Awesome video my friend. 🍟🍟🍟🍦🍦🍦
Thanks for the visit!
Yoooo you are soo coooool I always wanted to make my rc car but I don't know where to buy the stuffs . You are great bro. I hope you were my friend
You can do it! Thanks for your comments!
Love your vids Max but could you show us how to use the KY-008 Laser sensor Module
Nice video!
Thanks!
Thanks bro ❤️ 🙏🏿
No problem! 🙂
Cool! 👍🏻👍🏻
Thanks for watching! Stay tuned for the next one.
Nice 👍
Im tryna do this and put a Lexus LS400 shell on it I hope it comes out good looking 💯🔥💪🏻Thanks for the video this really helps‼️
Sounds cool! Good luck with your project 🙌
Thanks for your comment!
It would be great to have a FPV camera and goggles. Plus the range could be made to go further. All in all very cool!!
Would be cool of course, but I didn't want to increase the cost of a project that's intended for budget-level makers. Though I would be happy to do a video of where I make a FPV RC Drift car in the future. Thanks!
Max bhai I am big fan of u
Hi there! Thanks for staying tuned!
OMG! This is amazing Max! Been looking forward to this video for sooo long, Great Job! (thanks for putting my comment in your video, made my day!😄)
So glad to hear you liked it! Thank you for your kind comment 😄
AWESOME ! ...
Thank you! Cheers!
Love it
Great video! Really enjoyed the content. One suggestion for even better performance would be to consider using a rechargeable battery, like the 18650mAh. It can provide a longer-lasting experience and save on the hassle of constantly replacing batteries. Keep up the good work!
I added alkaline batteries to make it more affordable for others to make the car. Not everyone these days can build one of these RC cars with lithium batteries under $20 total. Thanks for your kind comment!
a belt drive motor rc sweet 🙌🏽⚡️🏎️
Thanks for your comment, man! 😀
@@MaxImagination no problem 😉
great video, I 3d print and am going to use the blue print to create a fast print easy assemble version.
Same here. I have a range of 1:32 resin printable models. First one is the Ford Transit Mk1! (UK 😅)
Nice
first actual DIY project that i can afford
Well done 👏👍💯 I've always wanted to know how to build one of these, but never had anyone around willing to teach me as a kid. I couldn't afford a factory built one like the others, but I could afford parts over time if I had only known how to put them together.
Oh well such is life right 🤷♂️, I will have much more fun with it now anyhow so thanks awesome video 👍🤙💯
Thank you so much! 😀
@@MaxImagination You're welcome 🙂!
Glad to have you as a viewer 🙂
If you appreciate what I do and would like to show some support, I'd be grateful if you contribute to my work with a coffee - www.buymeacoffee.com/MaxImagination
Thanks!
Wow very nice,l made this rc car 🎉
Great 👍
Thanks for your comment!
I will make this at home
Ever since I was a kid I liked messing with this remote control cars opening them and do something different on them 😅😁😋
It look like factory made, really you work is very impressive specially for chassis, next time please try to make 4wd rc drift car
Thanks, Jonu! I appreciate that. Will write that down 👍
Thanks bro
Welcome!
Thank you idol, I want try. GOD bless 🙏👍.
Thanks for your comment 😊
I watching every new upload idol, I'm from the Philippines. Thank you 🙏👍