Nice one! May be you make Part 2 with disassembling the tires / motor / drum brake and the ball-bearings or have a closer look at the electronic parts.
Thank you for awesome video, right now I know what kind of hardware do I need to assemble my max, witch one I got in peaces. Thank you! This video is very helpful!
I love how well maintainable the scooter is. The screws hidden under glued on things is annoying, though. Especially on the front wheel. The bearings sometimes need to be changed very early (not even 120 miles and they make grinding noises on my G30D II) so accessing the front wheel without removing stickers would have been great, but hey, hopefully the soon-to-be installed high-quality bearings will not have any issues anytime soon.
Why does everyone have bearing problems with the front wheel, never rear wheel. My ninebot made these grinding noises after 300 kilometers (around 185 miles) and now after 1700 kilometers it has completly broken
Dope video Bro I bought a storage unit and they had mostly old one but I found 6 of the g30 so thank you very much for the information your very smart hard worker like myself well im trying to be lol.
Great vid! The max looks like a very well constructed scooter! Seems like a lot of thought went into it's over all design. Great engineering! No wonder why it's $650-$800 bucks. well worth it!
I'm badly waiting for a max plus with front shocks and removable battery. Finally this good overall design will get right of this stumped bottom plastic cover.
@@pashko90 You'll be waiting a long time for removable battery, 90% of users don't need it and don't want it (compromises water resistance) as for front shocks, its easy enough to do this yourself if you want them.
@@pashko90 are you going to carry a 20lbs battery around to exchange when one runs out ? Otherwise it's unnecessary to have a removable battery, save for replacement when one goes bad but that is simple enough with the current setup.
As a warning, since this bike is easy to disassemble it's also very easy to steal even when locked behind the wheel with a strong U Lock. A thief took my Max G30 in under 10 minutes and left the lock completely intact.
La meilleur des trotinette que l'ont peu acheté ! Qu'elle plaisir de rouler avec !!!! Le meilleur achat que j'ai fait depuis des années merci à segway et tout ces ingénieurs ! Je suis l'homme le plus heureux sur terre :p
Great job! Can you tell us about all the battery information? Because I would like to buy a spare pack to exchange it, when the main battery is low or dead.
Спасибо за видео, но остались вопросы. Не показано, как было снято кольцо фиксатора рычага складывания рулевой стойки. Ещё более интересно, как его поставить на место, не поломав его. Светоотражательные наклейки лучше снимать при помощи теплового фена, подойдёт даже для сушки волос.
All I want to do is replace the rear tire because I got a nail in it last month and it doesn't retain air anymore.. didn't know id need a PhD in transplanting and cutting wires and shit Jesus this thing alone was expensive enough..
There's a gasket around the wires to help prevent water entry. (Pay attention to 5:13 to the black rubber part once they pull the motor cables) Like the guy said above me, it's not meant to be submerged, only to survive large water splashes, like rain and puddles.
@@Bushcrawler might be suffering from Segway induced trauma. These things are touted as either complete and utter dog shit to back to the future and beyond machine's! What seems like an ordinary task in one realm( cars) completely blows ones mind in Segway e-scooter world. I'm now proficient in: ☑️Control Board Diagnostics. ☑️Firmware script kiddie hacking. ☑️Quality &Control Board Certified. ☑️ DIY Customer Service ☑️ Error Codes'and debugging. Basically we humans simply wanted scooters not another skill set!🦉
This is very helpful for when i need to do stuff to mines. And at the moment, both my tires are slowly deflating and I'm wondering if I need to buy new tires or inner tubes. I don't know how these wheels are.
My ninebot max scooter makes weird noises especially when you ride on a bumpy terrain. The sound is almost like plastic cracking or like something is rattling in it. What should I do?
I‘ve got the same issue, it comes from the upper portion of the stem. I can hear a metal sound when I pull on the brake cable and push it back in. I couldn’t see what it might be in this video though. The part, where the cable gets removed from the stem is missing.
A friend of mine used "Security Torx T15" in his Ninebot G30 Max. Has to be "Security" type for the central hole in the tip to match the central pin in the screw.
I spoke with Segway team because I have error 14, they told me to do The reboot and now my kik scooter doesn't have any power to ride with me, the wheel is spinning only rotated by hand suspended and accelerated arrive at 29km/h but still Powerless when touch The ground...and when press for reboot is coming error 10 and 15. Any toughts???
Error 14 is a brake lever, error 15 is accelerator error. I think what your BLE board is defective. If you in LA I might be able to help you out. 5624999091
Broooo I'm so mad you gotta do all that to take off that rear tire! I gotta do a simple tire change but all those wires have to get disconnected first... 💀
I have! I went to a bike shop and they removed them for me and put new, better ones on. You can also remove the stock clunky bell and replace it with a better one, It looks so much sleeker and stealthy, I love it
Nice one! May be you make Part 2 with disassembling the tires / motor / drum brake and the ball-bearings or have a closer look at the electronic parts.
I just switch out back mudguard watching your video. Thank you so much 😊
Thank you for all the guidance this was really great...
Thank you for awesome video, right now I know what kind of hardware do I need to assemble my max, witch one I got in peaces. Thank you! This video is very helpful!
I love how well maintainable the scooter is. The screws hidden under glued on things is annoying, though. Especially on the front wheel. The bearings sometimes need to be changed very early (not even 120 miles and they make grinding noises on my G30D II) so accessing the front wheel without removing stickers would have been great, but hey, hopefully the soon-to-be installed high-quality bearings will not have any issues anytime soon.
Why does everyone have bearing problems with the front wheel, never rear wheel. My ninebot made these grinding noises after 300 kilometers (around 185 miles) and now after 1700 kilometers it has completly broken
@@markoglibetic8617 The rear wheel bearings are covered by the motor but the front wheel bearings are exposed.
Wow, Awesome video. Will help many people.
Wow! Thanks for posting this. I think it is undeniable that the MAX G30 is an ABSOLUTE UNIT!
did u solve this?
Dope video Bro I bought a storage unit and they had mostly old one but I found 6 of the g30 so thank you very much for the information your very smart hard worker like myself well im trying to be lol.
Great vid! The max looks like a very well constructed scooter! Seems like a lot of thought went into it's over all design. Great engineering! No wonder why it's $650-$800 bucks. well worth it!
Its a big step up from the Xiaomi M365 & the M365 Pro ver as well.
I'm badly waiting for a max plus with front shocks and removable battery. Finally this good overall design will get right of this stumped bottom plastic cover.
@@pashko90 You'll be waiting a long time for removable battery, 90% of users don't need it and don't want it (compromises water resistance) as for front shocks, its easy enough to do this yourself if you want them.
@@pashko90 the battery is removable 6:51. Just not very easily- lol
@@pashko90 are you going to carry a 20lbs battery around to exchange when one runs out ? Otherwise it's unnecessary to have a removable battery, save for replacement when one goes bad but that is simple enough with the current setup.
Brilliant been looking for the type of blossom bit for the deck.
Blossom bit? You mean security bit? Mine was a five point pentagon security bit to remove bottom cover
very informative video specially for me bcz i just got this ele scoti and want to chick this one from inside
I can't even get the darn front tire off!!! The bolt just keeps going around and not even coming loose!!
Now put it back together lol! Do one on the c80 plz!
As a warning, since this bike is easy to disassemble it's also very easy to steal even when locked behind the wheel with a strong U Lock. A thief took my Max G30 in under 10 minutes and left the lock completely intact.
Great video however, can we all stop with the jingle music that's supposed to make us feel up beat, but instead makes us angry haha
La meilleur des trotinette que l'ont peu acheté ! Qu'elle plaisir de rouler avec !!!! Le meilleur achat que j'ai fait depuis des années merci à segway et tout ces ingénieurs ! Je suis l'homme le plus heureux sur terre :p
Great job! Can you tell us about all the battery information? Because I would like to buy a spare pack to exchange it, when the main battery is low or dead.
Nodbot makes battery kits for the max. Even a 48 volt upgrade so you can go faster.
Great construction
Better than 2000 dollars bikes
Спасибо за видео, но остались вопросы. Не показано, как было снято кольцо фиксатора рычага складывания рулевой стойки. Ещё более интересно, как его поставить на место, не поломав его. Светоотражательные наклейки лучше снимать при помощи теплового фена, подойдёт даже для сушки волос.
Решение нашёл при помощи фена. Греем кольцо до температуры пластичности пластмассы и аккуратно снимаем. Ставим также при помощи нагрева кольца феном.
Why is the person dressed like they're doing an autopsy on a coronavirus patient??
The Scooters were made in China.
This is the dust-free workshop, anti-static, dust clothing
It's generally referred to as a bunny suit, and most modern electronics manufacturers will require similar ppe
Maybe he doesn't want to get electrocuted. There is a lot of energy in the battery.
it's like dissecting an cadaver in anatomy class... :P
All I want to do is replace the rear tire because I got a nail in it last month and it doesn't retain air anymore.. didn't know id need a PhD in transplanting and cutting wires and shit Jesus this thing alone was expensive enough..
Lend me an icepick for my eardrums? Great video tho with listed allen sizes...
What tool he use to open the bottom of the ninebot max to access the battery. Please and thanks
99.99% of the Viewers can´t assemble it now
Brakes are different and much harder to remove on my max
Is this like some Chinese version?
The Motor Ring is so huge and the connectors are completely different than my German G30D
Excellent! Now all the thieves know how to quickly turn your scooter into scrap for cash.
I see the cable going from the rear wheel hub into the main body/batter through an open hole @5:16
Wouldn't that mean easy water damage?
if you put it under water...yes. but at normal conditions like rain...no.
There's a gasket around the wires to help prevent water entry. (Pay attention to 5:13 to the black rubber part once they pull the motor cables) Like the guy said above me, it's not meant to be submerged, only to survive large water splashes, like rain and puddles.
Mine just started to develop a little sideplay on the frontwheel. Can the screws between the fork and wheel untighten during normal usage?
Why not just remove the covers and check for yourself? takes 2 minutes :P
They can also loosen!!
@@Bushcrawler might be suffering from Segway induced trauma. These things are touted as either complete and utter dog shit to back to the future and beyond machine's!
What seems like an ordinary task in one realm( cars) completely blows ones mind in Segway e-scooter world. I'm now proficient in:
☑️Control Board Diagnostics. ☑️Firmware script kiddie hacking. ☑️Quality &Control Board Certified.
☑️ DIY Customer Service
☑️ Error Codes'and debugging.
Basically we humans simply wanted scooters not another skill set!🦉
This is very helpful for when i need to do stuff to mines. And at the moment, both my tires are slowly deflating and I'm wondering if I need to buy new tires or inner tubes. I don't know how these wheels are.
Tubeless tires.
what size spanner wrench I need at 3:05 and 4:40 ?
New max g30, I only have a beeping sound and no Bluetooth logo so I don’t know how to connect! Also how to take off display? What exact tool to use?
nevermind the display my bad, but the bluetooth icon on the scooter does not flash to activate the scooter....Tee "reboot" does not solve the issue.
My ninebot max scooter makes weird noises especially when you ride on a bumpy terrain. The sound is almost like plastic cracking or like something is rattling in it. What should I do?
I‘ve got the same issue, it comes from the upper portion of the stem. I can hear a metal sound when I pull on the brake cable and push it back in. I couldn’t see what it might be in this video though. The part, where the cable gets removed from the stem is missing.
Where can I buy tool like that?
Got a full protection kit then uses a adjustable spanner....
8 months and no one upvoted this. Where's the ring spanner or at least slot ones.
And now assemble it again
Why is my screw right behind and inaccessible to the wrench? Wtf
What tool do you need to unscrew the under panel of the scotter
Video shows T20 hex key.
A friend of mine used "Security Torx T15" in his Ninebot G30 Max. Has to be "Security" type for the central hole in the tip to match the central pin in the screw.
Anyone have a picture of the label on the battery that could be read? 6:51
Which are the tools , please ?
And why I don’t complain about the 600 it cost me. There’s a lot going on
What about the tires?
Fatih K. The tyres Defy logic! you need a Thermic lance to remove these tyres!
I spoke with Segway team because I have error 14, they told me to do The reboot and now my kik scooter doesn't have any power to ride with me, the wheel is spinning only rotated by hand suspended and accelerated arrive at 29km/h but still Powerless when touch The ground...and when press for reboot is coming error 10 and 15. Any toughts???
Error 14 is a brake lever, error 15 is accelerator error. I think what your BLE board is defective. If you in LA I might be able to help you out. 5624999091
Him: brutally murdering a ninebot max
music: ☺☺
Broooo I'm so mad you gotta do all that to take off that rear tire! I gotta do a simple tire change but all those wires have to get disconnected first... 💀
Could have used compressed air to remove that grip lol.
Shit i destroyed a plastic thing and the screws were so tight, that my wrench bendet
Will a Tile tracker fit inside?
Why not something more specific like changing tires.
Same way as on 365, but since a tire wall is bigger, it's gonna be easier to replace a tire.
Everything, except the tires.
This is the level of breakdown IKEA would take to sell scooters
Has anyone taken off their handle grips for G30 to put different ones on?
I have! I went to a bike shop and they removed them for me and put new, better ones on. You can also remove the stock clunky bell and replace it with a better one, It looks so much sleeker and stealthy, I love it
And where is the second part, the assembly video?
Assembly is just disassembly but reversed.
Donde pedir la bateria del Segway NINEBOT KickScooter MAX
Where I can buy a batery of Segway Ninibot KickScooter MAX
and the Motor?
Back wheel is the motor.
Dangerous! I'm not doing any changes to my Ninebot! 8)
I'll do them on mine instead! 😂
It's not a T20 , it's T15 thanks for the false information now I got to go buy another wrench
Phuck the music...😫
Корявые, коврик не прогрели и оторвали
Вот жеж мастера криворуки
7r34
Oh joy, I get to read what a stupid joke
Цыгане самокат разобрали
That was painful to watch.
The worst disassembly ever not heat gun no proper tools
No heat gun for obvious reasons... the huge battery inside is flammable and glued directly onto the metal.