Ninebot MAX G30/G30D/G30LP/G30LE Aluminum mudguard suport instalation SHIFT.LT
Vložit
- čas přidán 21. 11. 2020
- You can buy it at:
www.shift.lt/en/ninebot-max-p...
Mudguard:
www.shift.lt/en/ninebot-max-p...
Toolls you need:
1) 18mm wrench;
2) 2.5mm HEX tool;
3) Knife for pealing the stickers;
4) Hair dryer for heating the glue of the stickers.
If you have questions, you can write:
info@shift.lt
Nice one! This could be a nice addition for my NInebot for my GoPro! :)
Got a brand new bearings from you today.Thanks for shipping!
Thank you for buying! ;)
dear i appriciate u to place nicely without any changing the basics
What's the length and width for the new screws that secure the mudguard support to the fender?
hello, it could be installed on the inside of the wheel axle?
Ordered a pair of bearings for my Ninebot from you. It is also recommended to replace a rubber seals along with bearings, but couldn't t find them at your shop.
Thank you, we will check for ordering them.
Nice one. What's the likelihood of the bolt becoming undone as there is less thread?
it won't be a problem, there is enough of the bolt :)
Supposed to add the bracket first, then the tabbed washer.
Actually no, because the washer has "leg" which is for lock axis not to spin.
@@Shiftlt "Tab", "leg", same thing. The point is: if you place the bracket behind the washer, you cancel out the possibility of damaging the bracket from the turning nut.
hello nice, work i noticed that you used a 3d printed peice is the any chance to have the stl file?
You know the Bracket look's better if mounted inside the frame between the wheel, and not outside the frame
Agree, but im not sure if it will have that stregh, as its not pushed hard by big surface of frame and nut. So in our way the construction is a lot stronger. But for chinease, slim version its probably better to put it inside the frame as you sugest :)
May I know the purpose of the accessory added to the rear?
It tightens the mudguard. Scooters becomes totally solid, no more wobling and noises from the mudguard.
nice vid , do you know if the 5A fast charger works with this model?
It should work
Yes it works :)
Is it the same process on the other side of the wheel, IE heat to remove sticker and cover then replace?
yes, exactly the same :)
Really wanna order this but I’m in the US :(
what is the difference ninebot max g30 lp from le ??
One is for USA other is for EU, lp has 30km/h speed LE has 25km/h.
La llave de que medida es?
18mm, sorry for late reply :) or M10
So I really want to purchase this fender brace from the link you have listed below because it is the only one that is not made of plastic. However I'm a little sceptical of the site as it seems not legit and like a over seas site that will just take my money. Is the site legit and will I receive my package?
Hello, yes as you can pay by PayPal. Scamers use only credit card payments. So you get paypal protection. We have EU company number etc :)
Have you figured out a fix for the gap that is created between the cover after install?
Which gap?
Did you really just test the heat gun by pointing it at your hand!?!! Be careful bro!! :)
Its from distance and for a fraction of a second :)) i do not wanted to melt the plastic so checked if its not too hot :))
@@Shiftlt My friend, just keep a candlestick there... way safer, and you can tell how much heat there is. :)
Bonjour on ne voit rien du tout