All parts in list form: -Full metal stunts race rails and 12 bar -brembo rcs 16 hand brake master -all steel braided brake lines -r6 mono block hb caliper -brembo p34 foot brake caliper -Dicks customs built tank -ssmoto saggy ass fix -twin stunts 3 caliper bracket (I would get ssmoto because this one gave me issues with the abs sensor) -52 tooth sprocket -rcs one finger clutch lever -big rotor kit for hand brake -ssmoto triple tree -kx high pro taper bars -ignition and kill switch relocation
Love that you call the crappy people out by name so many CZcams’s will get dodgy work or something and never name the people/companies then 100s more get scammed too
i love how u chuck the amazon stuff hey. what got me me into your vids originally was when u chucked the amazon fairings on your 636. before that i just saw u as gixxer brahs mate haha
Hey man, I’m really digging watching your progression! You mentioned a clunk with your new triple tree. Did you ever figure out the culprit? Something is popping in my front end. On my R7.
I don’t think the ss moto triple tree proportions are correct. If my steering stem nut is even slightly loose the whole triple rocks back and forth every time I brake. The only fix really was to tighten tf out of it and locktite it because it kept coming lose. I’ve also heard people say that front he factory the steering stem bearings can be loose so you may be able to fix it by just tightening the nuts under the triple tree
Does the Brembo p34 foot brake caliper work with the stock rear brake master cylinder? New to this stunt life…currently building my R7 right now and definitely will be using some of the things u did😂
Yes. You just connect the brake line right up to it. You can pretty much connect any master to any caliper, because brake lines all connect the same. You might need a new rear brake line though to make sure it’s long enough to get to the caliper, stock might not be enough once you change its position on a bracket
thinking of getting one, should i get the bars? is it fine to just run stock clip ons? looking to just get good enough on this bike to do it on every other bike, like drop backs and stuff
All parts in list form:
-Full metal stunts race rails and 12 bar
-brembo rcs 16 hand brake master
-all steel braided brake lines
-r6 mono block hb caliper
-brembo p34 foot brake caliper
-Dicks customs built tank
-ssmoto saggy ass fix
-twin stunts 3 caliper bracket (I would get ssmoto because this one gave me issues with the abs sensor)
-52 tooth sprocket
-rcs one finger clutch lever
-big rotor kit for hand brake
-ssmoto triple tree
-kx high pro taper bars
-ignition and kill switch relocation
If only someone did that for a 23 636
Do you prefer CR high or kx high bars?
@@lincolnlf23yes for a 2023 636 Zx6r stunt bike build stunt parts list
Love that you call the crappy people out by name so many CZcams’s will get dodgy work or something and never name the people/companies then 100s more get scammed too
dope build, i am totally not jealous right now :c
Thanks for sharing! ❤
Beautiful bike and build!
This is dope, gonna use this to make my fz07
i love how u chuck the amazon stuff hey. what got me me into your vids originally was when u chucked the amazon fairings on your 636. before that i just saw u as gixxer brahs mate haha
Haha amazon is hit or miss. As long as it gets the job done I’m all for saving money!
Nice bike
Cool bike
Ive got the knockoff akra from ebay for dirt cheap and it gets a lot of compliments for the way it sounds
Love the vids man keep it up!
Good bike
that is so sick
My ssmoto triple did the same thing but I pulled it off and put it back on tighter and they seem fine now.
I’ve taken it off many times and still always had problems. My new outlaw stuntparts one is way better
🔥
I just ordered the outlaw triple because of the issues you mentioned on the SS. Hope the outlaw is better!
Yo bro how you liking the outlaw triple?
@@ciinnvmon I got it installed about a week ago, I haven’t gotten any riding in but fit and finish is excellent. There’s a small video on my channel
Hey man, I’m really digging watching your progression! You mentioned a clunk with your new triple tree. Did you ever figure out the culprit? Something is popping in my front end. On my R7.
I don’t think the ss moto triple tree proportions are correct. If my steering stem nut is even slightly loose the whole triple rocks back and forth every time I brake. The only fix really was to tighten tf out of it and locktite it because it kept coming lose. I’ve also heard people say that front he factory the steering stem bearings can be loose so you may be able to fix it by just tightening the nuts under the triple tree
what’re you topping out at w/ the 52 tooth rear sprocket? stock is 42 right?
Yeah like 100-110
What did you use for cutting the windcreen and the white trim?
A dremel and the white trim is door trim stuff on Amazon
godam bro you might have just sold an r7
awesome build !!! is the front sprocket stock ?
Yes
Quick question, why did you go for a brembo p34 and monoblock over a dual monoblock set up on the rear?
I bought the handbrake set up as a whole kit so that’s just what they sent but a 4 piston foot brake is kind of a lot
Does the Brembo p34 foot brake caliper work with the stock rear brake master cylinder? New to this stunt life…currently building my R7 right now and definitely will be using some of the things u did😂
Yes. You just connect the brake line right up to it. You can pretty much connect any master to any caliper, because brake lines all connect the same. You might need a new rear brake line though to make sure it’s long enough to get to the caliper, stock might not be enough once you change its position on a bracket
@@jar7d appreciate the feedback! Did u remove your abs system physically from the bike? Or just the flash tune abs plug in?
What rear tires do you run? I've heard different things about what's good for stunting tires
Whatever I can find for cheap really but gpr 300 is common
Did you have to reroute/replace the throttle cable and clutch line after changing to the pro taper bars?
I re routed the cables but none of them had to be replaced. Some bikes will need longer cables though
thinking of getting one, should i get the bars? is it fine to just run stock clip ons? looking to just get good enough on this bike to do it on every other bike, like drop backs and stuff
Stock clip ons are fine too, I wheelied mine stock for a while
@@jar7d thanks man
do you have a tune on it? or stock ecu?
Stock
What length brake lines did you get?
I think 60cm
Rider mod not included!
This is the one gixxer brah rode?
Yeah
Why not mod a mt07 ?
R7 has better suspension for stoppies and I got it used for almost the same price as used Mt07’s we’re going for
the 07 feels pretty bulky. does the r7 handle better than the 07?@@jar7d
@@noahkiger9788 they pretty much feel the same but the R7 is less bouncy
Nice ass bike