I was told the solenoid is just a solenoid that is there to prevent engine backfire at shutoff. I was told by a guy who does some work on my mowers that it doesn't stop running but that might be wrong info bc I have not verified it myself. Just replaced my solenoid with a bolt but now it does backfire sometimes when cut off. After you had the carburetor off, you probably just needed to remove the bowl to clean it and then remove the jets with a small wire that are inside the tube the bowl connects to. I use a wire like you buy at Christmas to hang ornaments or from a bread tie with the paper or plastic removed. Keep your old original carb to clean and use later if needed I think they are probably built better than the ones on Amazon for $20 or $30. Some other jets on the carb also to clean. Mine would only run on choke but after cleaning the jets in the carburetor it ran fine. Hood design is bad.IMO.
Thank you. It’s about that time of year. I did end up buying another “amazon” carb and it immediately did the exact same thing the the first Amazon carb. LoL. I still have the original. I’m just real lazy but it’s time I just get smart.
Před 3 měsíci+1
Where is the idle/ speed adjustment on this carb? Just got this mower and it seems a bit slow
There should be a screw on the side of the carb. It will be a slot or flat head style. It adjusts the amount of fuel going into the carb which changes the idol speed. I hope this helps.
Před 3 měsíci
I will take a look and get back to you thanks so much!
They work just as well as the others. It’s really luck of the draw if you don’t have time to mess with gaskets and jets. Personally I would still prefer to clean and rebuild mine however the price point makes that choice kind moot.
Sitting on the tractor it's above the battery, left inside of the dash panel or steering wheel pedestal. Your battery also kind of sits tucked in underneath this pedestal. I've read from others that the brown wire is usually the problem because of having a bad connection or a worn through wire or being corroded. It's a finned aluminum rectangular block somewhat with rounded ends where the 2 bolts go to mount it.
I have an LX 188 and the hood has been gone for years. That high quality plastic on a riding mower was just genius! (SOURcasm)
Dave Dennis yes. Indeed. I hope to have sometime and make a nice ..... okay rat 🐀 rod style hood. See what I can come up with LoL =] 💜
What pin was seated incorrectly?
Thanks for letting me know what she sounds like turned up LOL WHEELIES YAAAAAa
I was told the solenoid is just a solenoid that is there to prevent engine backfire at shutoff. I was told by a guy who does some work on my mowers that it doesn't stop running but that might be wrong info bc I have not verified it myself. Just replaced my solenoid with a bolt but now it does backfire sometimes when cut off. After you had the carburetor off, you probably just needed to remove the bowl to clean it and then remove the jets with a small wire that are inside the tube the bowl connects to. I use a wire like you buy at Christmas to hang ornaments or from a bread tie with the paper or plastic removed. Keep your old original carb to clean and use later if needed I think they are probably built better than the ones on Amazon for $20 or $30. Some other jets on the carb also to clean. Mine would only run on choke but after cleaning the jets in the carburetor it ran fine. Hood design is bad.IMO.
Thank you. It’s about that time of year. I did end up buying another “amazon” carb and it immediately did the exact same thing the the first Amazon carb. LoL. I still have the original. I’m just real lazy but it’s time I just get smart.
Where is the idle/ speed adjustment on this carb? Just got this mower and it seems a bit slow
There should be a screw on the side of the carb. It will be a slot or flat head style. It adjusts the amount of fuel going into the carb which changes the idol speed. I hope this helps.
I will take a look and get back to you thanks so much!
Can you point it out at 6:52?
Hi, Is the carburetor still working? I bought same carb from carbpro & it started leaking from overflow after a month
Yes. After a month it did the same exact deal. 😡 I figured a gasket went. I haven’t had time to look at it.
Little late sorry but wondering what company did you order the carb from
Carbpro AM128355 Carburetor Carb Replacement with Gasket Kits for John Deere 2317 2718 9330 LX188 LX279 LX289 17HP Lawn Tractor for Kawasaki FD501V Engine Replace 15003-2653 www.amazon.ca/dp/B07C964R4H/ref=cm_sw_r_cp_api_glt_i_G8VJ2AGFKCPVY8BZ5G39
They work just as well as the others. It’s really luck of the draw if you don’t have time to mess with gaskets and jets. Personally I would still prefer to clean and rebuild mine however the price point makes that choice kind moot.
question, you know where the voltage regulator is on that lx188? Can not find it. rgds
I wish I could help but I do not. I am sorry.
Sitting on the tractor it's above the battery, left inside of the dash panel or steering wheel pedestal. Your battery also kind of sits tucked in underneath this pedestal. I've read from others that the brown wire is usually the problem because of having a bad connection or a worn through wire or being corroded. It's a finned aluminum rectangular block somewhat with rounded ends where the 2 bolts go to mount it.
Edit your volume homie, the engine noise is killing people lol
TourStar Productions okay. I’ll do better =]
what pin?
Are you asking about the fuel shit off pin to prevent fuel from leaking out? I may have to rewatch my own video. 🤦🏼