New SCX24 Project? Deadbolt Vs C10 Comparison! What Model Should You Get?
Vložit
- čas přidán 1. 10. 2020
- Checking out my newest addition. Going to start a new project soon with it. What should I do? Comparing it in stock form vs the C10 stock. How do they do?
Contact me at 2fastmattracing@gmail.com
If you’d like to donate to help support the channel & get a shoutout on the channel you can donate by PayPal here!
www.paypal.me/2fmrc
Check out all of the 1.0 tires from RC4WD here!
store.rc4wd.com/10-Tires_c_59...
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~ - Zábava
I got lucky today and found a Deadbolt for $40! 🤩 no battery, but who cares? It’s never even seen dirt!
Rusty’s RC Garage that’s insane!!! Sweet find!
It's really nice to see the Mod community support these so well. It makes it possible for us guys who don't have a 1/10th scale budget.
Yes it does! Very happy to see some companies jump on board with upgrades for these 1/24s
Hey there! Love the Channel ! I just wanted to mention that if you flip the front bumper mounts the HR bumper sits way nicer to the body and also lifts it considerably giving you a way better attack angle. Not sure how that would work with the other models But for the Jeep it’s a great move!
Amazing the difference with tires. I waited until the last upgrade to put beadlocks and rc4wd tires on my jeep (I have the Patagonia and Goodyear) but I couldn't figure out why all my upgrades didn't help that much until the tires then holy crap what a different.
Can you link me to the setup you used ? I’m not sure what tires will fit on my scx24
Thanks for the video
Deadbolt is my favourite just very hard to get also seeing the driver in the machine makes it all better. Stretching springs twice the length and a second front end for the rear for rear steer on ch3. But you could do it to any of the 24's.
Dee and mee hobbies has every variant of these 24th scale beast.
I haven't fully watched the video yet, but will when I get home. I did subscribe to your channel though and looking forward to watching more of your videos. I'm torn between the C10 and the deadbolt. It'll be my first 1/24. I did however buy the JConcepts Creep body.
This will be an interesting series on the Deadbolt. Mine has wheel weights & I lowered the esc 5mm & 80% of the time it will out crawl my C10 that has the same Nitto tires & steel beadlocks. I’ve tried the shocks on the frame & for me it didn’t work. The gain wasn’t enough to over come it being more top heavy. I’m sure your tire comparison will be great when finished.
Gramps Ramblings yeah I’m still not even 100% sure which way I’m going with it yet 😂
wow, those tires are awesome! nice video. are you ever going to do a video on batteries? charging, storing etc. most of my other RC things don't use Lipos, and Lipos need extra care apparently.
Jelly Leggs that’s definitely a good idea. I may try to do that soon. I have sooo many videos I’ve started that I need to finish but I’ll try to get to work on that as well
Just picked up a deadbolt and a green c10 today for me and my wife, got a brass diff, brass wheel weights and front brass wheel hubs. Waiting for the new bronco to get here. I think we all need least 1 of each model lol
Absolutely! That’s how I ended up with 12 of them lol
What is your course molded from, it looks fantastic? And how long did it take you to build? That is a piece of art in my book. Thanks for sharing with us.
The C10 has smaller tires and more overhang vs deadbolt but the longer wheelbase is nice on the c10
I am not surprised to see how much better the thornbird are than stock (they look GREAT BTW!) but i am surprised how much better the c10 tires are than the deadbolts! I would have guessed they would be basically the same compound and softness! Your doing great work bud!
ThePreppersBunkerOutdoors yeah I knew the c10 did a little better on the course in stock from and sort of knew it was the tires but I was surprised they were that much better! I tried a couple climbs over and over with the stock deadbolt tires and it just wouldn’t do anything! The C10s aren’t great but they will at least climb something lol. I see a lot of people using the stock dead bolt tires and i just can’t figure out how?! I’ve never been able to get anything out of them. I mean you can soak them in wd40 and help soften them a tad but they still just don’t compare to a good set.
I'm new to this rc sport. A friend is letting me use his c10 to see how I like it. Like the looks of the Jeep. Great work on the video.
Awesome! That’s a good friend lol. Enjoy and let me know which one you end up buying yourself. I know you have to be addicted already lol
@@2fmrc Exactly. The white Jeep will probably be my choice. I was out picking up rocks today to make a rock pile to do living room crawling. These things are a blast. Looks like an extra battery would be a good first add on. Any other must haves you would suggest?
@@brianonthego yeah an extra battery is great. Then you can basically run non stop lol. They really are a blast. They require very little rock etc to crawl and have fun on. One of the best upgrades is definitely weights for the wheels. Or wheels,tires and weights!
Hey man, I've been loving the videos and you convinced me to get some upgrades for my scx24. One of the things that I bought was the +4mm stub axle set from Hot Racing. They seem to wobble when you steer to one side though. I made sure to put the O-ring from the stock axle into the new axle but it still wobbles. If you have any tips or information for me that would be greatly appreciated!
-Daniel
daniel dowd check your steering dual rate. You may have to dial it down a bit. Hold your truck off the ground and turn to one side and give it some throttle. Watch to see if the drive cup is sort of binding. Turn it the other way and do the same. Sometimes when you’re able to turn farther than you really should it binds and causes a wobble. Let me know if that helps! Glad you’re enjoying the videos. I have so many more planned! I just gotta make time to get one project at a time finished lol
O-ring? 🙁 I rebuilt front and rear when I did the aluminum housing swap didn't see any o-rings 😞 shit. Do I gotta take these things apart again? 🤦🤦🤦😫😭
@@99dedbuffoons17 I would take one off at least and check to see if they’re in there. If they aren’t then they might have some unwanted play.
Where’d you get the rock buggy panels?
Thanks for these great videos! I’m sold on getting one of these! As a first time buyer would you recommend I get the deadbolt or the Jeep? They don’t have the Truck at the local RC Shop.
Thanks so much! Really appreciate you watching! Honestly I always tell everyone to get whichever model they like the looks of best because with a little work you can make them all very capable. The deadbolt is probably a little better out of the box and has less body rub etc. Just because the Jeep has a little heavier body with the fenders and stuff. If you like the look of the deadbolt then I’d probably go with it just because once you add longer shocks or bigger tires etc you won’t have any issues with body rub. Or just cut on the Jeep body lol. Overall they share most of the same parts so you can always convert them to whatever!
What do you think of the roc katana compared to these trucks?
Am I mistaken or does the deadbolt have smaller tires from the factory than the other ones
Nice! Love those tires! Where did you get them? I've looked on Google, all I see is the 1.9 size for the 1/10 trucks.
Rc4wd- look at their 1" tire selection.
Yeah just check the rc4wd site in the 1.0 section or eBay sometimes has the rc4wd stuff.
@@2fmrc I found them! Thanks guys!
Greetings Matt, congrats on your new toy...let the mods begin....LOL...I was looking at the RC4WD Raceline Comp Bead locks like you show here. I saw that there was no hex just a slot for the axle pin. How do you like them and do they maintain stock track width? Give us the scoop...LOL....Thanks Much!
Skip Miller I’ll have to measure to check if they stay stock width or not but so far they seem pretty good. I’m not a big fan of the way they mount myself. I would’ve bought them a long time ago if they had a hex. So far I’ve had no issue with it but I sort of like having my hex personally. The little screws that come in them and the racelines suck. The tool they give you for them is horrible and strips out instantly. I made one with a screw that had a head on it that fit them.
@@2fmrc Thanks Matt...did you have the same issues with the screws on the Raceline wheels that are on your CRC that are beadlocks with the patagonias? I have a set of those in the mail to me as we speak. Can't wait!
Skip Miller yes. Those little screws suck. Be very careful with the tool they give you. They will strip very easily. I got about 3 screws in those exact wheels that you are talking about and it was stripped. I had a screw with a head on it that fit over those tiny screws so I epoxied it into a little wrench I had and use it now. Works great
Skip Miller someone said this worked with them but I haven’t tried it.
Nut Driver with Precision Handle, 1.5mm x 5.5" www.amazon.com/dp/B072XVRV86/ref=cm_sw_r_cp_api_fab_aL7DFbJ0NV2JW
@@2fmrc Thank you very much....I have one on it's way...Like you, I like Amazon...They have the, " I want it now feature ".....LOL....Thanks again...my the schwortz be with you!
Rub in some wd-40 on the stock tires and let them sit for a bit. You'd be surprised how good they can be. Softens them up.
Yeah I’ve did the wd40 with a few sets. Still nowhere near as good as the rc4wd tires though.
Just a thought. Do the rc4wd tires have to go on rc4wd rims? Thought about getting some.
do you have a video on moving the shocks to the chassis? New to this platform.
I don’t have one specifically for that but I did cover it in one of my C10 videos. Possibly the stock vs mods or just the C10 Is it any good video. I can totally make a video on it though! It helps on my course for sure. Some people don’t like it but I prefer them moved myself.
Welcome to the platform! Are you loving it?
@@2fmrc I got my son a scx24 deadbolt for Christmas and I've been playing with it and love it while he's not home. I have arrma Sentons so I'm normally a basher.. I cant decide which scx24 to get myself now. I figured we could play with them inside this winter. Leaning towards a C10 I guess even though I'm a Ford guy lol
@@MudMonsterRacing4 that’s awesome! How old is your son? He’ll love running these with you I’m sure. My kids love just running them along the couch and stuff. They are a great winter toy for sure! Honestly you can make any of them into amazing little crawlers so my advice is to pick the one you like the looks of most and go from there.
@@2fmrc my son is 5 but he already has his own arrma senton mega and is pretty good with it. Also got him an ecx brutus for Christmas lol So basically your laying the shocks down to the rear to get more travel? Watched your c10 video
What is your favorite tire for these?
brandon collings honestly on my indoor course the rock creepers seem to be most everyone’s favorite. The new Thornbirds did REALLY well though. Better than I expected honestly. A lot of it depends on how the truck is set up. I run rock creepers on my c10 and they are amazing. I put them on this deadbolt and it wouldn’t climb very well. Mostly because they are a little smaller and the truck just kept hanging the skid and links on everything. Moving the shocks usually fixes that. I’m working on a full tire comparison. Hoping to finish it up soon. It’s just a TON of work lol
@@2fmrc I love the look of the rock creepers and they look like they grip really well. I bought some the other day I'm just waiting for the wheels. I just wish they were a little bigger. I'm thinking about getting the patagonias or the wranglers and see what i think of those.
brandon collings yeah that’s the only reason I don’t run the creepers on my Jeep or yota. They are a bit small. I really like the wranglers and Patagonia’s! Both are really good and have that sort of mid size that works well for a lot of trucks.
Does the deadbolt come with bigger tires than the c10?
Yes they are a tiny bit bigger than the c10 tires but I feel like the c10 tires are slightly better.
What wheels are on the bronco looking one in the back beside the green c10
The Jeep? It has rc4wd competition beadlocks with Patagonia tires.
@@2fmrc the silver bronco on the left side beside the green c10
@@braydonmckay7334 oh ok. That has the rc4wd rage beadlocks on it. Kinetic makes some that look very similar also. Kinetic also make colored rings for theirs. They are both good wheels though.
@@2fmrc ok thank you
There really isn't that big of difference between them. I have and have compared the C10, JLU, and Deadbolt out of the box. If I HAD to rate those three for capability, it would be Deadbolt, JLU, then the C10. And the ONLY reason the C10 comes in last is the body clearance. The tires are definitely better on the C10.
Yeah none of them will stay stock long. They need too much imo. May as well buy a motor and esc when you purchase the truck or just be let down by the stock ones. I agree the C10s tires are probably best but they all suck compared to a good set of hyrax or most any Rc4wd tire.
The most annoying for me is that i don’t find shocks that holds oil or grease and not taller then stock, really impossible to find, ..... carisma msa-1e are too tall, those scx24 are nice and in the end of the day,tons of everyday stress relief 🤪😎🐒
The lack of 24th scale shocks really is irritating. Even if we couldnt get oil filled shocks, just shocks with more actual travel would be nice!
The first guy doing this will be rich 😎
Bachir Battache the hobbyplus cr24 shocks are about the best all around I’ve found. Not quite as long as the carisma but long enough to give that extra travel. They are hard to find sometimes though. The rc4wd old man emu shocks are a good option also!
I have a torsion chassis for my Scx10 from Billet works designs REALLY WISH SOMEONE would make one for these. GamyRC's Mini Mantis chassis for the Basher ROCKSTA axles is AMAZING so I Know torsion chassis can work in place of shocks at 1/24 scale
Ehhhhh...but That wouldn't help much for anybody that wants better performance But still LOOKS like a truck
What did you use to paint the k10 grill and bumper
Mason Hughes nothing special. Just some white spray paint I had in the garage. Lots of clear over top of that to help it not chip real easily hopefully
@@2fmrc yea I'm thinking about using plasti dip so it won't chip
Mason Hughes I thought about trying that as well. Had a bunch of blue on hand but no white so I went with the spray paint lol
@@2fmrc nice
If I get a Stock SCX24 Which one should I get?
Honestly I would get the one you like the looks of most. They can all be modded to be very good!
what model is that toyota pickup?
It was originally a deadbolt scx24. The body came from a 1/20 amt model kit.
Do 1/18 scale have alot of modification too or not becuse I found one I want it's got full interior hard shell but can't find parts to mod with its called a katana I forgot the brand but it will come up in yt Can u look It up and see if I can mod it or if I can use parts from these on it becuse I can't find a hard plastic full interior RC 1/18 w alot of mods I could do cus I hate the flimsy shells
Most of the 1/18s don’t have many upgrades but you can always make something work lol. The katana looks really cool. The 1/18 stuff is just kind of an odd size for me. It don’t fit my indoor course and I prefer the 1/10s for outdoor stuff so I never really run my 1/18s.
@@2fmrc I know I might just get that and a 1/10 is there Anny full interior 1/10s also what model do I get if I get a scx24 or can I get Anny 1/10 if the mods work for all I'm new so I don't know
People seem to like scx24s alot tho I don't like the shells
@@h.g.almond4600 yeah that’s why I change all of mine lol. I did like the c10 but it gets a bit boring after awhile.
could u please post links for wheels and tyres, where u buy from etc..cheers from Australia
genemaster74 I’ll try to find a link. Usually just buy from eBay. The rc4wd tires you can usually get straight from their site. I’ll put it in the description.
If you want super swampers you can find some on amazon just type in 1/24 rc tires
Edit the supper swampers are a 1.0 id but it si wider then stock rims
antsstudio I always search amazon first because I want my stuff quick lol. Then I usually check eBay for Fast and Free shipping. If not there I go to the rc4wd site. They usually ship pretty quick also though.
genemaster74 I added the rc4wd link to the description. Here it is as well
store.rc4wd.com/10-Tires_c_599.html
@@2fmrc yeah
Dude what wheels are them thorn birds on please
Those are the rc4wd competition beadlock wheels. Only bad thing about them is they don’t use a hex. They mount directly to the pin in the axle. Works fine but it limits weights etc. Not really sure why they did that but I love the wheel overall.
i beg you to sound enthusiastic
This isn’t one of those fake channels. Can’t stand when people are overly chipper for no reason. It’s the real world. Not Disney world.
@@2fmrc i get that, i appreciate you making that clear, love the channel i just subscribed