Easily 4ws any SCX24! 3 different options and how to! GIVEAWAY explained!!
Vložit
- čas přidán 4. 12. 2020
- HeyOK and Bastens 4ws controller setup.
Adding 4ws to the scx24 is a very simple mod but I’ve seen a lot of questions asked about the different ways to set it up. So now we are gonna cover the easiest and best solutions.
Contact me at 2fastmattracing@gmail.com
If you’d like to donate to help support the channel & get a shoutout on the channel you can donate by PayPal here!
www.paypal.me/2fmrc
White wheels on the C10 found here
bit.ly/35BgFlR
Parts needed for 4ws can be found here!
Scx24 front axle assembly
www.ebay.com/itm/Axial-Racing...
Savox servo 0255
Savox SH-0255MG Micro Metal Gear Digital Servo www.amazon.com/dp/B004WC4JAO/...
Servo extension cable
Haobase 10 Pcs Remote Control Female to Male Servo Extension Cable Wire www.amazon.com/dp/B01DLXG83A/...
Bastens 4ws controller
Bastens QuadSteer 4 Wheel Steering Control Module Works with Either 2Ch or 3Ch transmitters www.amazon.com/dp/B00JQKJ6K0/...
HeyOK 4ws controller
www.rpphobby.com/product_p/he...
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~ - Zábava
Contest is finished!! Just made the drawing and uploading the video of the winner now! Be sure to watch to see if you were the lucky winner! Thanks so much to everyone for commenting and watching. I truly wish I could reward you all!
Cool brother...Sounds good.
The deadbolt of course..I live 40 minutes from the Rubicon Trail there’s a lot of jeeps but the guys who are serious all their shit looks like a deadbolt! Rock On !!
I have a tip for you, rip that sticker off of the motor, Will run cooler !! The sticker is holding in the heat. I noticed your sticker still on, thought I would let you know
Yeah I’ve seen a lot of people say that. I honestly don’t even run this truck yet. I planned to swap the motor cause I never even run the stock normally lol. I’m gonna do some temp checks on it while running the new overdrive gears so maybe I’ll check with and without the sticker also! I’ve also put small heat sinks off of a raspberry pi on them and it helps. Or just stick a magnet on them lol
Very useful video. Thanks! I've been eyeballing the Flysky GT5 for a while and didn't realize it would easily do rear steer like you showed. I'm impressed. Thanks again!
I really like the jeep however I picked up the deadbolt. The looks of the jeep are the best for me. However I do like your buggy with the cage on it. I’ve been wanting to do four wheel steering for some time with my kid. He watches your videos constantly and gets ideas so we appreciate you posting up these. It’s super helpful. And we always watch till the end.
#1
So glad there is someone out there that watches until the end!! 😆 Thats so cool that your son watches. How old is he? It’s so fun to share this hobby with the kids. Mine enjoy it but lose interest pretty quick still. I’m hoping as they get a little older they’ll get more into it. Thank you guys so much for watching! I really appreciate it so much
@@2fmrc my two kids and I have them. One is 10 years old and the other six. My 10-year-old is really into upgrading and modifying. It’s been 20 years since I had been into RC cars. I was really into nitro trucks and 1/8 scale buggies. I lost my site about 15 years ago and couldn’t drive my RC cars until I came across crawlers. Now I can drive them with the kids so it’s pretty awesome. I’ve modified my truck a ton. Honestly I am way more interested in the dig that you set up. I might pick your brain more about that because that something I think I want to do eventually. Not really sure exactly how you did it but I would be interested in a detailed video on that.
@@BlindBikeTrials message me on Facebook or email me and we can talk all you want about it. I’d also like to find out more about your son. I’d love to maybe send him something for Xmas as long as it would be ok with you?
@@2fmrc definitely. I’ll send you a message on Facebook.
Hey man if you’d rather have the jeep I’d swap you, I have the yellow one and prefer the deadbolt body after seeing it in videos. The only changes I’ve done is inverting the bumper so there’s more clearance
Great info. I have 3 scx24, Two Jeep’s & a C10. The C10 is my favorite! I am going to be building indoor track for my family to enjoy these amazing crawlers! Thanks for all your videos!
#20
That’s my favorite thing about these! You can take them anywhere and everyone can join in on the fun! Oh and with an indoor course you don’t have to worry about the weather. You can crawl anytime!
My JLU is my fav. I Love the look of it w the fenders and all especially w the stamped steelies flipped (deep dish). It was also my 1st, and I just fell in Love w the SCX24’s bcuz of it. Thanks for the opportunity!
#48
C10 is my favorite because of the nostalgic look, I love the blue one with the vintage style door advertisement. Always loved 2nd gen c10 chevys!!
#10
Yeah I’ve always wanted a C10 myself. Maybe someday I’ll end up with one. They’ve always been my favorite truck.
Blake you won!!! Go check out the contest results video!!! Let me know how to get your mailing address so I can get the controller on its way!
Started with the Jeep, added brass, wheels and several sets of tires. Onto a Bolt for the revolver/sidewinder/mudslinger/double barrel mod. Then another Bolt for a dig rig (have parts but haven't built it) Oh and two B-17's on the way (one to use as a tow rig, one to never open) . Just got home from the LHS where they set the end points on the Capra I finished this morning.
Got into RC in July so I think I'm on track for RC rehab any day now lol!
#56
HAHA!! You're just getting started then. Good luck with that! It only gets worse. Let me know if you need any help with the Dig Rig!
Wow this is super cool, appreciate you sharing. I'm just getting into the 1/24, and I'm digging on it. I'll keep watching for more, Love your videos. This is the beauty of the hobby !! Happy trailing
The 1/24 bring an entirely new experience to the hobby. I love them!
My brother got me into the the SCX24 back in January '21. The only thing could find is he Deadbolt and have been having a great time. I've been following and watching all of your posts have been great and very helpful for me this far. I have been watching your posts about the 4WS, and I am considering it at some point.
My favorite is the definitely the C10, it’s always been my dream truck and this is probably the closest I’ll be to having one for the next couple of years. My dad had one and my grandpa had one
#32
That’s a lot of the reason I like it so well. I’ve always wanted a real one lol
Good video man. Helpful for all the folks looking to go 4ws.
Thank you! I wish everyone could win!
I love my Jeep! I had to go with it because I own a jk so of course I wanted a mini. I already got the kenetic double barrel shocks kit after watching your videos but haven’t pulled the trigger on the Holmes revolver motor yet. Thanks for the vids, you have some of the best builds I’ve seen and most information on how and why you built them.
Thanks so much. Really appreciate it! The Holmes revolver is the smoothest option for these things for sure! Love it
The C10 is is my go to but they all are amazing! Thanks for all the info!!
#13
They really are all amazing! Can’t wait to see what a 2.0 could be! These are so good already that they have an awesome platform to expand on.
C-10 is my favorite, you have great content and good luck everyone!!!
#30
Thank you so much!! I really appreciate that. I wish everyone could win!
The C10 I'm a Chevy guy, my very first truck back in the 70s, was a 1970 pick up truck, wish I kept it , had no rest . Although the C10 is a 67, is even better yet, reminds me of my first truck, I got the gun gray . I'm surprised by the performance of this little truck. I love it, this is my passion I love this hobby. Again appreciate you sharing. Happy trailing
#38
It’s definitely my passion as well. I love everything about this hobby. My fav part is meeting others who share the same love for the hobby. That’s one of the main reasons I started the channel!
My favorite and the one I went with has got to be the c10. I just love a good Chevy. I've had a few different chevy trucks over the years, and my dad had a 65 c10 that I now have. I'll be restoring it over the next few years!
#25
Ohhhhhh I’m so jealous!! I want a real C10 someday. So awesome that you have one that’s been part of the family. Hopefully someday I’ll find me one and then I can pass it on to my son someday. Thanks so much for watching and commenting!
Great video and good explanation of options, thank you. My first vehicle was an Harvest Gold 1978 4wd International Scout and I worked and saved for three years as a teenager in order to buy it. So you can maybe guess that my favorite of the Axial scx24's is the Deadbolt. It may come as no surprise to some but just like my scout, I'm always working on my deadbolt. The deadbolt is tons more fun though! Again, great video. Keep them coming.
#29
That’s awesome! I really appreciate the compliment! Hard work pays off for sure. Good to learn at a young age lol. I could do something to one of these things every day! I love messing around with them.
Very good info. I like them all but the Green C10 seems to be my favorite right now.
#22
I can’t make myself beat my green C10 up! It’s just too clean. Love the look of it. So I kinda use my charcoal C10 to run with mostly lol
My first SCX24 just arrived. Got the gray C10 just because I like the pickup body more than the Rubicon or the Deadbolt. Also chose the gray C10 over the green one because it looks cooler... like a restored car.
#44
I just had to get two too! C10’s Love your stuff, and thank you!
#8
Thank you so much! It’s just too hard to choose! Good thing they aren’t horribly expensive I guess lol
Good to see you show people I had 3 Jeep’s and a c10 when first released, first thing I noticed yep it’s possible but I’m a bit busy building conversions etc so I didn’t bother nice channel bud 👍🏼
#31
Yeah finding time to do these mods is pretty hard for me also. I definitely have to make myself set aside time. Getting more and more busy lately lol
@@2fmrc I hear ya bud I side lined designing parts & making Rc conversions, that’s when I had the Scx24’s now that I did sideline that side of Rc hobby I wish I had my. 24’s again lol. I like the stance of yours w/ with wheels 👍🏼
My favorite scx24 is your Dig Rig. It inspired me to attempt to build one modeled after it. Dig Rig is a beast and hopefully I can get mine performing the same! Keep up the vids man take it easy.
#19
That’s so awesome! I really appreciate the kind words and definitely let me know if you need ANY help with it! Keep me updated on the progress!
@@2fmrc will do bud thank you
Thanks for sharing this with us. I have a C10 for the mild stuff and a Deadbolt for the more challenging obstacles. I like the DB better because it's better designed for crawling than the C10 is plus the tires don't rub on the body like they do on the C10. Rear steer for the DB is the next mod!
#45
I bought the brass and just used 1 set of four to do both fronts of my two trucks, and honestly, the difference even on stock everything is crazy
It makes a huge difference!
Fantastic video! Thank you for posting. Just ordered the Bastens setup since I'm having issue getting my Deadbolt rear steer working as I want. My Fave is the grey C-10 for the good looks and it's my most modded. FYI, the HeyOK shows out of stock.
#24
Thank you so much! The Bastens works really well. I was a little surprised. It was a bit of a bear to get my servos both centered all the time. Just keep playing with it if you have any trouble. Keep me updated on how it goes! Guess the HeyOK has been a hit.
I learned something today, didn’t know about the 4wd controller for the SCX24. I bought the C10 because I used to have a 1:1. Then bought a deadbolt & recently bought the Jeep. They are all modded just a little different except for the Jeep which is stock except for the servo & high clearance links. I think my favorite is the one that I’m driving at the time. My least favorite right now is the C10, I don’t like the shock I have on it. I drive the Jeep more but that might be because it’s the newest. Guess if you get right down to it I don’t have a favorite, they’re like kids, they’re all a little bit different but you love them all.
#39
I could not have said it better. That’s sums it up. Now I know why I can’t ever pick one to get rid of either 😆
I picked the jeep. I really liked the way it looks,and I own a full size jeep. When I can't take that out ,I pull out the rc. I'm really surprised about how capable this scx24 is. Its amazing.
#51
Its crazy how capable they are!!
I can't wait until the rest of my c-10 build is almost done so I can start thinking about a new transmitter and doing 4 wheel steering. The c-10 is my favorite because I just like the stock tires and the way its sits better from the start.
#52
Matt my favorite truck is the charcoal c10, it’s the first one I started with, I have gone though it made many up grades. After watching this video I can feel a four steer mod in my future. Thanks as always review great video!
#21
When I went to get my 1st C10 I really thought I was buying the green one and then I seen the charcoal and had to have it. Then I couldn’t believe I passed on the green so I ended up with it as well 😂. Thanks so much for watching and commenting! Really appreciate it.
I found myself in the same boat! The green truck is next lol.
@@mattowens2674 that’s why I went ahead and preordered the Betty. I knew once it was out I’d end up having to have it also lol
I like this option a lot better than using the ch3 switch to steer! Jeep is my favorite!
Yeah it’s a much better way to get full 4ws capabilities.
Thanks for the video. Deadbolt for base ability but love the c10 grey body.
I agree. Not having the body rub on the deadbolt helps out a lot! But gotta love the C10s looks
Hey man, Y link Fab from existing links. I did this for my front setup of the longest links in the scx24 for long wb and will be doing the same when i mount the new steer axle in the rear. I found the best way and Most stable is to mount the rear upper links inside the double sheer bracket as they were intended to be on the mount. Must remove the ball joints from the rod ends, then sand the ends to come together like a Y then glue them together, is plenty strong glued, then use a small piece of silicone wire insulation that fits the screw tightly as the new joint mod removes all the slop. I have done this wire insulation mod to replace all those Sloppy ball inserts on the whole rig, way smoother action.
And for the rear steer action, i switched out the 3 way switch on the radio with a self centering thumb dial, i mounted in a more convenient location i can hit with my thumb when let go it centers automatically making it way Faster and user friendly than that setup you described. Could also use a self centering toggle for the rear steer to get faster full throw, just like full size monster trucks use a toggle.
I am pretty impressed by the rig that you have set up with the rear dig. Four wheel steer looks like it could be fun to play around with especially with something like the radio that you have. Definitely will be looking into running a similar set up.
#23
The dig rig is a blast for sure! 4ws is fun as well. Not for everyone or every vehicle imo but I do love it on a rig that I have set up for it.
@@2fmrc mine are pretty much just stock other than the servo at the moment but i do plan to do some mods and upgrades. i tried using a jeep model hard body. but it wasnt even close to being the correct size haha
@@Thiryart the 1/20 models fit best but it’s hard to find them sometimes.
Thanks for explaining hot to do this. My favorite scx24 is the White Jeep. I ordered the b17 truck...still waiting. I like the jeep because my 1/24 model Bigfoot body fit on perfectly.
fav scx 24 mine is the deadbolt, my wife's is the c10.... thanks for showing us these controllers
#16
It’s awesome that your wife enjoys them also! Mine couldn’t care less about my RCs 😂
My favorite scx24 is the c10 in gray because the body style and gray/black color scheme is such a charmer.
#2
When I picked up my 1st C10 I really thought I was gonna get the green and then I seen the gray in person and had to have it! Thanks so much for watching and commenting. Good luck!
I like the jeep, just cause that's the only ones I have lol. I also always liked the look of a well done deadbolt. Thanks
#46
That accessory can come handy
So I’m blaming you for all the mods that I have bought for all of my scx24 rigs LOL just kidding bro. I like the Jeep and C-10. I like all of your videos regardless of how short or long they are because I learn something new every time. Keep up the amazing work bro.
#50
HAHA!!! Gotta have someone to blame! Really appreciate you watching and commenting!
@@2fmrc LOL right LOL. Thank you and your welcome
c10 is my fav, love old school look.
#41
I have the grey C-10. So far it's my favorite small scale Crawler.
#49
Another great video thanks for all the info as farvas the contest thats so cool my favorite of these is the c10 it reminds me so much of my 1969 c20 I'm slowly making it in to that old truck!😂
#27
Thank you so much! Hard to beat a C10 or C20!
Thank you for the great info
Love the video. I bought the c10 but made my own body from a model kit so now it has a 78 ford longbed body on it. It would be badass to have 4 wheel steer !!!
#12
Nice!!! The old Fords are sick looking also!
I actually drive a Ford truck myself lol. I’ve never been biased either way toward Chevy or Ford. I like them both so I just get whatever I like lol
@@2fmrc I also drive a ford. my 2005 f150 has almost 300,000 miles on it lol
@@Hellbilly_74 dang! Killin it!
I like the deadbolt i think it crawls better with minimal upgrades and its not limited by the scale looks (wheel base & tire size) of the the c10 and jeep.
#36
That’s why it was the 1st and 2nd one I owned lol
nice wheels did mine like that. looks sweet
Have the same thing on my venom creeper for aws and works awesome
Great totorial seems to be a good way. My favorite scx24 is the Chevy. I like it because I'm a herd core Chevy guy and we have the same truck but a 70 and I've always loved this body style.
#34
I’m jealous!! I want a real one so bad. Maybe someday!
@@2fmrc yea ours is really rough 1.5 inch of bondo in some places
HERDcore! Sounds like a great name for a genre of whiney liberal protest bands 🤣
Love your show you have helped me alot
Thanks so much for watching!! Glad it’s helped out a bit!
Thanx for the info!
I like the C10. It's a truck. It's got the best looking body. I'm going to dress up my Deadbolt with that Proline body though.
#15
I can’t wait to see what people do with that body! I’ll definitely be ordering one. I think with a good paint job it could be bad!
I like the grey c10 the best😂. I like this the best because my dad has a truck just like it and I think it looks the best out of the bunch😎!!
#35
Man I’d love to have a real C10 someday! Awesome!
I picked the Jeep. Growing up my dad had one, and still does. They’re both two doors, but the jku is the closest I could get.
#7
Sweet! That’s part of the reason I had to get the C10. I just really want a real one 😂 always been my favorite truck.
I know it’s is off topic, but any experience with the Exc Barrage Uv Fpv? There’s one left at my hobby shop I’m interested hahah
I now have 10 plus of these darn cool scx24 trucks. But out of all of them my c10 is my absolute favorite one in the bunch. I got a clear body and did a tamiya cooper color on it and did the black chrome look as well. Plus the inner fender setup and white wagon wheels 5+mm GPM shafts and weights and shocks and links and pretty much everything i could to it. Its a amazing looking rig and can crawl or trail outdoors like a 10th scale rig. And i setup a real rock indoors course as well and it just does what i ask it to do. Its great would change one thing on it. But would love to have a good way to do 4ws on it.
#40
Dang! That thing sounds bad! I’m hoping to work on a real rock indoor course this winter. Gotta get a few things lined out for it 1st.
@@2fmrc i dont remember if i showed the copper c10 i did a few weeks ago. I will definitely post ot back up to show the FB group and you Sunday at some point. And show different angles of it and under side and inside. Its a good looking truck to me. Might not be others color choices. But to me its perfect for. A resto modded truck.
Also i will get pics of my indoor rock course. Im in process of moving it to a better spot in my house. So its just not in the way of things but still near windows for natural light and fresh air.
My favorite scx24 would have to be the C10 because the body just looks so damn good!
#14
It’s probably my favorite out of the box just because the body is SOOOO sweet! I’ve always wanted a C10 so that has a little to do with my favoritism lol
My favorite scx24 is my scx24 because I can play with it whenever I want. Y'all have a badass day 🤘
#11
That’s what it’s all about!! Best thing about these smaller trucks too! You can take them anywhere and have a blast! Have a good one!
Gotta love the silver c10. Its the nicest looking body in my opinion. Also in a Chevy driving young man. Who doesn't love a good old straight bed or them beautiful stepsides
Hope this counts for my placement. Nice surprise there! Thanks for the opportunity as well as the great content. You are definitely one of the more honest spoken individuals when it comes to r/c channels and ones opinion and review. I do say it is much appreciated! Keep it up, and ill keep tuned!
#43
It absolutely counts! I would probably do more giveaways if they wasnt so confusing for me to keep up with the comments. I love to help out when I can. Im a pay it forward type for sure. I appreciate the kind words. Thanks so much for watching!!
@@2fmrc have you ever watched @harley designs? He had a giveaway video recently and I recall him using a program that does all the keeping track of contestants, pucking contestants, etc. Ill try to look for the video and let you know at what time in the video he speaks about the program so you can cheack it out.
@@2fmrc it will have to be sometime tomorrow though most likely. I got a football team of kids(feels like a 100 but its only 6) to get bathed and put to bed. So my night will be occupied. But ill send younthe info tomorrow forsure
Love my C10, just love the style
I think all the stock scx24 are cool but I like the hardbody ones the best 😎
#53
C10 Green all the way. The look is so classic.
#4
It really is! So clean! I’d love to have the real thing someday lol
@@2fmrc awesome video. Great for any beginner to follow your instructions
My favorite is my custom deadbolt, now with the hot racing rock racing chassis and every other upgrade possible 🤦🏼♂️ i love it cuz it’s super badass and capable but i hate myself cuz i spent way too much on it😂
I also need a new body but not a lot of options
I like the looks of the dark C10 but for out of the box performance/capability my choice is the deadbolt.
#33
That’s honestly why the deadbolt was my first 2 scx24s I owned. I’m all about some performance lol
@@2fmrc I bought a deadbolt and my Dad has the charcoal C10. The dead bolt is all around better. I've got to get some better tires though for sure!
Scx24 C10 ! Whats not to love about a 1967 Chev C10!
#38
Exactly!!!
I have a Devastator and that thing looks crazy, a straight line it can not role
C10 is a cool looking truck
I like my gray C10 because it’s “blacked out” and scale. I am using my c10 more than my 1/10 nowadays.
#55
I love my dead bolt. I night concede doing 4 wheel steering if it that easy thanks for the vid!
#47
Absolutely! Thanks for watching!
ya except the setup he went thru is not simple as he described. There are numerous issues using the same radio. see my comment above for more info on 4ws with the factory radio setup. Dont really need that controller for what it is.
@@Chris-zu8ve not sure how it can get much easier than plugging in a couple wires. Yeah there are many different ways to do it but most people aren’t going to solder a new switch into a transmitter. Most people don’t wanna put batteries in one let alone go soldering on it 😆
Love your videos man🤘 my only rig is the c10. Don't like jeeps, love broncos but not a fan of the deadbolt. The Betty looks cool. My favorite is the c10 for looks. Love that at the beginning your like Matt here with another quick video then 25 minutes later your like sorry guys. Lol 😆 🤣 🤘
#26
That always crosses my mind when I say that but now it’s just natural to say it and run with it 😆 knowing it’s probably not gonna be a quick one lol. Hopefully it don’t annoy people too much. Thanks so much for watching and commenting! I really appreciate it!
To hell with the haters i say
My favorite is the scx 24 Jeep with Deadbolt body
#6
Nice! I haven’t tried the deadbolt body on my Jeep. May have to!
Rock on !
Also my son and i have the deadbolt, my C10 sticking with stock but Deadbolt for experimenting with mods like 4ws.
#42
My favorite scx24 is my white jeep, tho the c10 wins in the looks department.
#5
The Jeep really surprised me when I got mine. I was afraid the weight of the body would kill the performance but it really didn’t hurt it too bad. The Jeep can definitely perform!
Dude i was just chilling the audio went to about 1000 at the end scared the shit out of me
Lol my bad!
How did you re-mount the body after the rear steer installation? It appears you have to remove the back body hinge for clearance of the new servo.
Did you try to unplug the front servo when adjusting the rear & vice versa. also you can drop that goofy servo saver it takes mere seconds to remove it then remove the attachment underneath with pliers etc now your left with a standard servo head in which you can fit a normal servo arm, that or like you said just pick up an Eco power or Emaxx servo.. 👍🏼
Reefs 99 or agfrc all the way! The mofo black label is a really good servo also. I never run the stock setup. Just used it here for instruction cause most people will probably upgrade their front and move it to the rear. There is just no trim for the rear with the stock transmitter so no matter what you’re always off just a hair cause the splines never line up perfectly.
Thanks for showing the different options. I'm interested in 4 wheel just for a tighter turning radius, I wonder if there is enough power from the ESC to directly with a y harness for proportional 4 wheel steering all the time?
Yeah that’ll work also. I’ve seen a few people run that as well.
seems like either a custom linkage, inline servo reverser, or fancier remote are required to complete this setup, making it slightly less easy :)
What is the weight in grams of that 4WS controller please?
You are crushing it again man. 👍 I saw your video on the new motor mount with your channel name on it and bought one. I agree about the other mount. Its almost like it was made to put the motor high up into the air on purpose. My end state Deadbolt isn't end state anymore and won't be until the new mount arrives.
Just picked up yesterday a used DX5C from FB Marketplace, would like to find a way to mod the Deadbolt with 4ws and new electronics...
My favorite scx24 model is the yellow jeep, because Ive always loved jeeps and they are just cool off road vehicles.love the vids and I hope I win the giveaway.
#17
Thanks so much! The Jeep’s are definitely sweet! I actually bought a deadbolt 1st but wanted the Jeep. I was worried the Jeep body may hurt its performance but it really don’t. Good luck in the giveaway!
@@2fmrc Thanks 👍
can you put a y connector in the st location and then put the 2 servos together and boom u got 4 wheel steer. no crab walk but i think that would be better.
Yeah that works also. It’s just always on
I find it hilarious that you call this a quick video. Anyway thanks for the info.
Haha! I mean compared to the rest of our day it is pretty quick 🤷🏻♂️
Would the servo extension cables work to extend the factory led lighting cables?
Yes it will! I would suggest this switch though if you aren’t already using the aux/ch3 port. It allows you to turn your lights off and on with the ch3 switch and it serves as the extension you need to move the lights up to the light socket in the grill.
Apex RC Products RC Remote Electronic AUX Channel On/Off Switch #9025 www.amazon.com/dp/B07BKSGW3D/ref=cm_sw_r_cp_api_glc_fabc_Qx9YFbDFMV09Q?_encoding=UTF8&psc=1
I have a fs-gt5 with an extra receiver. I like your 3rd option. What's the rest of the requirements? Please and thank you.
Brah the best scx body wise is the C10. I haven't gotten to try other body styles other that a jeep though :/
It is the best looking out of the box imo. Love the C10s honestly!
Hey I’m wondering what mil stone Windeners your running since they work with the stamped steel wheels. Also wondering what wheels those are. Great videos and keep up the good work👍
Thanks so much! On this truck I’m just running some cheap brass hex I found on amazon. The wider stance comes from the wheels. They are the rc4wd stamped steel beadlocks with the hex flipped. So you mount the hex on what’s normally the outside of the wheel. It gives them the deep dish look and makes the truck sit wider. I love how they look like that.
Did you make a video about rear steer with the V2 electronics? I was thinkin of doing this but i get what your saying about having full control with the rear steer vs switch with full turn.
What’s the better motor and esc combo to go with? I’m working with the barrage and emaxx right now but I kinda feel restricted with the barrage motor.
Well I wish the Holmes revolver was still readily available. It’s a beast! The best setup in my opinion is it with the castle micro sidewinder. I love that setup in my silver rig. They discontinued that motor but are supposed to be working on an upgrade for the scx24 so hopefully it’ll be out sooner than later!
C10 all the way I’ve always been a truck guy
They are soooo sweet! Hard to pass up!
I like the switch idea but then I'd lose led lights to be turned on/off so until I get a esc for my flysky if I can offer another idea is all time 3WS..just a Y cable and reverse cable cable in Ch 1
I should’ve showed that option as well! I have several y cables laying around lol
@@2fmrc idk but might be alittle cheaper then switch but always 4ws may not be option for everyone just trying to help lol...oh and my favorite scx24s are your dig and white rigs and mine🤣
#3
@@stevedoerr1511 I’ve did that on 1/10 scale before but not these. It works 🤷🏻♂️
Deadbolt. It works the best.
#37
Yeah it don’t have all the body rub etc straight out of the box. Gives it a little advantage for sure!
Love my jeep and red deadbolt have you ever tested bbs in the tires to see if they actually work ?
Also have you tried a bigger body clip on the rear of the vehicle at the hinge so you don’t have to use a screwdriver to completely remove the body
@@bibleminute8325 I haven’t tried the bbs. I usually run some wheel weights so hate to add any more weight to the wheels. On my silver 4ws rig I used a couple pins in the rear. I drilled two small holes in the chassis rails and clipped it through there. It just worked out perfect that way. Haven’t did it on any of the others though.
It says hey ok and bastens, on the hey ok website it doesn't show rear steering only Feature I would like to get theirs due to the trim adjustment but I want all 4 modes do you know if this is possible
I'm just going to do the cheap and easy one with a stock servo on the rear for hopefully less strength and an Emax on the front.
Edit: Nevermind I bought the controller LOL
you vids are the most helpful, thanks for sharing, I have been looking for a set of mudslinger, but no go , do you have a spare set , or a contact ? cheers , Dan
I sure wish I did have an extra set or a contact. Or even an idea when more will be posted lol. So many people wanting them! I think they had a very few posted the other day to their site but they were gone within mins. They could make a killing if they could keep them in stock. Guess they are either way but man it sucks for us consumers!
thanks a bunch brother, cheers , keep up the great vids
What motor is that you are running in the grey rock bouncer??
I can see tho 4w steer would give you a tight turn radius
Yeah it definitely does!
have you turned the rims so that it is low-bed rims?
I mounted the hex on the opposite side that you normally do. That way the hex is technically on the outside of the wheel. Then when you mount them it gives them the deep dish look
B17 Betty it’s on order don’t have it yet.