Waste ink kit installation Epson ET-2750

Instruction video showing how to install the Printer Potty external waste ink kit on an Epson Ecotank ET-2750. The instructions will likely be useful for other printer models although some aspects of the process may be different.
You can find the kit shown in the video, via this link:
printerpotty.com/kit/lx2
... and also WICReset key(s) via:
printerpotty.com/keys
Please remember to like and share this video if you found it useful and share if you know someone looking for a solution to the waste ink error on their printer.

[@KalSze]

Two comments:
1. there should actually be one more screw at the bottom side of the printer; if you don't remove that, the side cover will not completely come out - instead it will only pivot to the back of the printer.
2. it's possible to completely remove the "exit piece" (it's grey in my unit) onto which the waste ink tube was originally attached; there are two screws that secure it. So you can completely remove the "exist piece", instead of making a cut in it to allow the waste ink tube to pass underneath. I've removed the "exit piece" from my unit and stored it together with the original waste ink box.

[@octoinkjet]

EDITED: You were right... Our mangled donor machine was missing the screw in the rear underside. I've got the same machine in better condition on my workbench and will be doing an updated video this to incorporate your points in and just improve the video overall..
Thanks for pointing those bits out!

[@bowdybuoy8773]

Any ideas on Cleaning a broken tank nozzle? i cant refill black. its stuck. ive tried to put in a needle to see if its clogged but it didnt work

[@octoinkjet]

Would need to pull our unit apart to see how it works and as it’s already a condemned unit I’ll schedule that when we’ve some time spare.

[@bowdybuoy8773]

@@octoinkjet c ool!