Tysm❤ this video helps me a lot. I’ve been looking for this instruction for a long time and see no one talk about the application to change the shortcut! 😢
just stumbled across your channel looking for this exact tutorial - which delivered perfectly, excellent demo of procreate and the 8bitdo - and am delightfully surprised at the quality of it and humour you two have. thank you for making a video on this niche combination!
Helpful tip - In Procreate while it won't increase\decrease brush size by 1% only 5%, the workaround is to adjust your brush settings - properties - Maximum and Minimum sizes. If you play around with this you can reduce the jump in brush sizes. Also like they mentioned for the eyedropper it's in the gestures menu for eyedropper, turn everything off except square + Apple Pencil, then program the M key to the button of your choice.
Hello Aman_Mondal , Yes it is but the zero 2 has to be modified or remapped with software to change the keyboard imputes to conform to the procreate shortcut keys.
the 8bitDo ultimate software has a limited amount of gamepads it works with. The 8BitDo Micro is on of them. sadly it dose not work on all that 8BitDo offers.
I have a problem with the gamepad, maybe you have an idea: I try to set it up with the software all the time, I can operate and synchronize everything in the software, but it won't take over. Unlike your gamepad, mine continues to flash a blue light. The switch is set to “K” as required by the software. The gamepad has also not appeared in my bluetooth device list. Any ideas? My iPad is also set to English (device language and keyboard layout) as I am actually from Germany. Thank you ~
Hello miss_akii , It sounds like you are doing every thing right but in order to sync the micro you have to put it in pairing mode. There is a little button next to the S-D-K switch , hold it down and the flashing blue light will get supper fast thats how you know it is in pairing mode . Keep holding it down and in you're bluetooth setting on the iPad it should be visible. it will say under Other Devices 8BitDo Micro gamepad , select it and now it should connect after all that . the ipad wont see it unless the blue light is flashing rapidly on the micro. We really hope this helps you out . If you have any other questions just let us know .
Hello RHDYTstudio , we really dont think so because if the controller is in keyboard mode it shouldn't conflict with you're gaming config . Gaming and keyboard modes are 2 different internal profiles so it really shouldn't do any thing. We hope we could help .
Hello, I bought the controller and I notice something odd: it randomly turns off when I'm in K mode. Have you had this type of issue? If so do you have a fix for it?
Hello AlphakamiSama, We really haven't had that problem but , we did notes that if we hadn't used it for a little bit of time it would auto shut off. The shutting off, for us was because it wasn't fully charged we hade to really be on top of it because for both of us we have to charge it quite a lot. We hope it gets better for you .
Hello seii791, we really wish we could help, It works for us. The only thing we can say is double check every thing in the Ultimate software and charge it up all the way and re sink it to the iPad? You have already don all of that of course we wish we could do more.
Hello, Good Question. Yes you can in the ultimate software for the micro you can add Alt as an option for a custom option. We found the alt key option in Others submenu . We hope this helps you out and have a great day.
Thank you! Et si des français passent par là, le pad est configuré en qwerty et non en azerty. Remplacez le m par ; et le z par w . Tout le reste fonctionne. Thanks a lot
Hi dorotson337, Since you have don every thing like we did it should work , but it doesn't. Make sure the mini is switched to K and open the Ultimate software . Delete the profile on the Ultimate software .Now create a totally new Profile and use the shortcut key we made to install all the shortcuts. Maybe doing it all over again could fix it? If we were you maybe customize the buttons to you're specific needs in procreate. Dont forget to save it when you are done. We lost profiles by not saving. we hope this helps.
Can this work on clip studio paint on iPad? I was looking into getting the tabmate but there's no way to get it. They only sell it in Japan and it's always sold out everywhere
Hello williammclean6594 . Sorry for the delayed response but yes it will work with CSP shortcuts on the IPAd Pro. Hope this helps you out. WE use to use the tab mate and like the 8BITdo Micri so much more.
@@mosscharmly yeah it's so much more expensive. You can actually get it the Amazon Japan page if you make an account. But yeah if you live in another country it's so much more expensive. Like I live in Canada so like every $100 American it's like 150 Canadian. For some reason American minimum wage is just way better. But I guess we don't have to pay for health insurance. I know a lot of jobs have health insurance in the states, but I'd rather just have universal healthcare
Hello RosalinaRobertson. It really depends on what hand you would hold it in. Check out the pdf we made at ( mosscharmly.gumroad.com/l/uahzj?layout=profile ) We hope this helps you out and everything goes ok. If this doesn't help, let us know.
@@mosscharmly thank you for the pdf. It helps amazingly , do you know how to put the command button and the [ , on the same button so I can increase by 1 size instead of by 5?
Tysm❤ this video helps me a lot. I’ve been looking for this instruction for a long time and see no one talk about the application to change the shortcut! 😢
Glad we could help you out kan9745.
just stumbled across your channel looking for this exact tutorial - which delivered perfectly, excellent demo of procreate and the 8bitdo - and am delightfully surprised at the quality of it and humour you two have. thank you for making a video on this niche combination!
Thank you so much pigoinionsalad! We’re so glad we could help.
That's awesome! I've never thought about doing this before.
this is a great idea. They should sell a proper single hand joystick for this application, like the Wiimote. it could be a bit more ergonomic.
That is a great idea JAFOpty. Especially it being ergonomic. That would be awesome.
Helpful tip - In Procreate while it won't increase\decrease brush size by 1% only 5%, the workaround is to adjust your brush settings - properties - Maximum and Minimum sizes. If you play around with this you can reduce the jump in brush sizes. Also like they mentioned for the eyedropper it's in the gestures menu for eyedropper, turn everything off except square + Apple Pencil, then program the M key to the button of your choice.
Thank you for helping out . We hope you get even more sparkles.
The eyedropper feature was the one I needed the most! I came across this by chance, and I hope others know it.
This video was done very well and super informative. I really like ya’lls vibe! I subscribed, looking forward to more awesome content from ya’ll.
Thank you so much mishaelwardnoahjags! We really appreciate that! And thank you for subscribing to us!
Thank you so much the only video I've seen on a very important device for workflow improvement
Glad it helped HobbesKarate . Thank you
Thank you guys :)
Hello seiji_senpai and we are happy to help. ;)
Is it possible to do this with 8bitdo zero 2 ?? Cuz the micro is not available where I stay
Hello Aman_Mondal , Yes it is but the zero 2 has to be modified or remapped with software to change the keyboard imputes to conform to the procreate shortcut keys.
@@mosscharmly oh okay
You guys rock!
Thank you Sheheryara. You rock too!
Is this only works on 8bitdo "micro" or its aplicable at any controler of them?
the 8bitDo ultimate software has a limited amount of gamepads it works with. The 8BitDo Micro is on of them. sadly it dose not work on all that 8BitDo offers.
I have a problem with the gamepad, maybe you have an idea: I try to set it up with the software all the time, I can operate and synchronize everything in the software, but it won't take over. Unlike your gamepad, mine continues to flash a blue light. The switch is set to “K” as required by the software. The gamepad has also not appeared in my bluetooth device list. Any ideas?
My iPad is also set to English (device language and keyboard layout) as I am actually from Germany.
Thank you ~
Hello miss_akii , It sounds like you are doing every thing right but in order to sync the micro you have to put it in pairing mode. There is a little button next to the S-D-K switch , hold it down and the flashing blue light will get supper fast thats how you know it is in pairing mode . Keep holding it down and in you're bluetooth setting on the iPad it should be visible. it will say under Other Devices 8BitDo Micro gamepad , select it and now it should connect after all that . the ipad wont see it unless the blue light is flashing rapidly on the micro. We really hope this helps you out . If you have any other questions just let us know .
@@mosscharmly omg thank you SO SO MUCH this rly helps me!!! now it's working, thank you!!!!!!
Question: I bought the 8BitDo Lite 2 for gaming purpose on my iPad. If I do this customization, will it mess up the default configuration for gaming?
Hello RHDYTstudio , we really dont think so because if the controller is in keyboard mode it shouldn't conflict with you're gaming config . Gaming and keyboard modes are 2 different internal profiles so it really shouldn't do any thing. We hope we could help .
Hello, I bought the controller and I notice something odd: it randomly turns off when I'm in K mode. Have you had this type of issue? If so do you have a fix for it?
Hello AlphakamiSama, We really haven't had that problem but , we did notes that if we hadn't used it for a little bit of time it would auto shut off. The shutting off, for us was because it wasn't fully charged we hade to really be on top of it because for both of us we have to charge it quite a lot. We hope it gets better for you .
I've tried setting the shorcuts for color picker and increase/decrease brush size but these didn't work for some reason.
Hello seii791, we really wish we could help, It works for us. The only thing we can say is double check every thing in the Ultimate software and charge it up all the way and re sink it to the iPad? You have already don all of that of course we wish we could do more.
Oh hav one question. Is it possible to make one of the buttons as an ALT key for the eye dropper tool?
Hello, Good Question. Yes you can in the ultimate software for the micro you can add Alt as an option for a custom option. We found the alt key option in Others submenu . We hope this helps you out and have a great day.
@@mosscharmly That is awesome to know. I got one coming today, becuase of your in depth guide! I hope you have a great day as well! 🐱
Thank you! Et si des français passent par là, le pad est configuré en qwerty et non en azerty. Remplacez le m par ; et le z par w . Tout le reste fonctionne. Thanks a lot
Merci garrytrooper5880 pou votre aide avec le public francophone.
Hi! I'm trying to use my 8bit on my Ipad, I changed everything as you do but still it's not working. Should I change something more in settings?
Hi dorotson337, Since you have don every thing like we did it should work , but it doesn't. Make sure the mini is switched to K and open the Ultimate software . Delete the profile on the Ultimate software .Now create a totally new Profile and use the shortcut key we made to install all the shortcuts. Maybe doing it all over again could fix it? If we were you maybe customize the buttons to you're specific needs in procreate. Dont forget to save it when you are done. We lost profiles by not saving. we hope this helps.
dont forget to connect the device on bluetooth setting in your ipad.
Can this work on clip studio paint on iPad? I was looking into getting the tabmate but there's no way to get it. They only sell it in Japan and it's always sold out everywhere
Hello williammclean6594 . Sorry for the delayed response but yes it will work with CSP shortcuts on the IPAd Pro. Hope this helps you out. WE use to use the tab mate and like the 8BITdo Micri so much more.
@@mosscharmly yeah it's so much more expensive. You can actually get it the Amazon Japan page if you make an account. But yeah if you live in another country it's so much more expensive. Like I live in Canada so like every $100 American it's like 150 Canadian. For some reason American minimum wage is just way better. But I guess we don't have to pay for health insurance. I know a lot of jobs have health insurance in the states, but I'd rather just have universal healthcare
What did you customize the eye dropper and the quick menu to be on?
Hello RosalinaRobertson. It really depends on what hand you would hold it in. Check out the pdf we made at ( mosscharmly.gumroad.com/l/uahzj?layout=profile ) We hope this helps you out and everything goes ok. If this doesn't help, let us know.
@@mosscharmly thank you for the pdf. It helps amazingly , do you know how to put the command button and the [ , on the same button so I can increase by 1 size instead of by 5?