How to clean and service your FELCO 211 Lopper

What you'll need:
- A allen key nr 4
- A 8 mm wrench
- A dry rag
- Scotch-Brite
- FELCO 990 grease
- FELCO 903 Sharpener
- FELCO 980 protective spray
Instructions:
1- Disassemble your tool
2- Clean all parts with a dry rag
3- Scrub each part carefully with scotch brite
4- Add FELCO 990 grease on to the counter blade
5- Reassemble your tool
6- Adjust your tool
7- Sharpen your tool:
Place the sharpener while maintaining a 30-degree angle on the edge side of the blade and make circular motions from the base of the blade toward the tip.
Place the sharpener on the other side of the blade maintaining a 5-degree angle, to remove the burr
9- Spray FELCO 980 on to your tool