How To Clean Abs Speed Sensor And Ring On Any Car Or Truck !!!
Vložit
- čas přidán 11. 10. 2019
- CLICK HERE FOR THE SHOP TOWELS
amzn.to/31bKuVt
CLICK HERE TO BUY YOUR NEXT FEBI BMW PARTS ON MY AMAZON STORE
www.amazon.com/ideas/amzn1.ac...\
CLICK HERE TO VISIT MY WEBSITE AND BMW FORUM
www.nathansbmwworkshop.com
How To Clean Abs Speed Sensor And Ring On Any Car Or Truck !!! For Business Contact :
Nathan's BMW Workshop
Po Box 115 Altenburg Mo 63732
nathan.youtube@yahoo.com - Auta a dopravní prostředky
Just paid £245 ($320) for my local BMW dealer to spend 2 days for diagnosis and replacement of Speed Sensor and front ABS Pulse transmitter! If that wasn't enough of an insult, my biege carpets are covered in muck and the front seat is marked.
For that price I could have bought a diagnostic tool and the sensors, assuming they needed replacing in the first place.
"It always pays to go to an Authorised Dealer.........................NOT!"
Great video, thank you, I'll forward to the dealership!
Thanks Nathan , I really like your step by step video. Please continue to pass your knowledge to us with your other videos. New BMW owner.
Watching your videos.
Probably the best videos I've seen looking for information very well spoken very well done
Nice video on replacing the wheel speed sensors but you never talked about how to clean the tone ring.I'm quite disappointed in that. Your title says ABS wheel sensor replacement and sensor ring cleaning there is no ring cleaning here at all what happened?
He actually does, said some guys blow air in hole or remove hub if really bad.
@@covidvirus2810 i use a magnet to insert in the hole of the sensor and rotate by hand... it take time! Oh boy!
@@MicPoitrasexactly what im doing and was hoping for a better solution, i have a ton of what looks like wheel bearing grease and metal shavings in mine
@@covidvirus2810 wonder where the muck goes if you blow air in though?
Exactly. I was more interested in seeing the tone ring cleaning than anything to do with the sensor
Nice easy to understand guidance along with helpful hints, Thank you and your assistant 😀
Sometimes I’m very thankful when I’m looking for common failure items on my e39 and one of Nathan’s videos comes up
Exactly what I needed. I had to drill out the sensor and replace it with a new one. The ABS light went off but then my brakes pulsated and the light came back on. I didn't know the sensor was magnets so I most likely left some metal shaving in the slot that caused it to go on and off intermittently.
Brilliant instructions as always Nathan.
Thank you for these videos!!!
Perfect video Nathan.
Thank you for your advice.
Good clear video / bought some towels on the link too!
I must have missed the part where you cleaned the ring ? I had an issue with my E81 where the ring was distorted by rust on the cv joint expanding the circumference that the ring sits on. You can apparently remove and replace just the ring, cleaning the cv outer shell of rust but I decided to change the whole half-shaft instead as I expected rust would return quickly in the UK climate. For a short-term fix I slid a washer under the sensor retaining bolt to position the hall effect probe slightly further from the ring. This worked for me as an expedient.
Yup, no ring cleaning except ' maybe blow it out w air'.
Thanks for the video. Can it be cleaned by CRC electronic cleaning spray?
Good video! Canned air? WD 40? not so sure about that but nice step by step!!!
Ok another great video! Also we use those towels in the house too lol
One of the best on ABS. WTG!
IMHO you should have looked down into the hole were the sensor came out of
and clean all of the teeth on the gear by rotating the rotor around until all have been cleaned.
Thank you for posting the video.
That’s a really nice workshop Nathan. Keep up the good work!
great! Thank you!
Buen trabajo, pero en mi caso tuve que limpiar además del sensor, el anillo magnético. Con imanes redondos de neodimio de 10mm, unidos con cinta americana, lo introduje en el hueco del sensor y giré la rueda para limpiar las birutas magnéticas que quedaron dentro.
Good lesson, though not much would have been lost by cutting the video's first three minutes.
must be for youtube algo
great video
In my E39, rain water in the street disconnects the speedometer and the automatic gearbox stop working properly. I do not have the proper scanner. I need to find out which sensor is bad in order to replace it. Some of the wire connector broke. I repaired it but I hope there is no polarity involved as I do not know which way the pair of wires of the sensor should be connected. Any advise?
Does the ABS light on in the dashboard before cleaning it up?
Hi there. Can this ABS sensor be clean with a can of carburetor spray? Thx
Thanks!
Will this fix speedometer not working as well?
How about cleaning it with a contact spray cleaner?
Please help me, where i can find abs magnetic wheel.ring with 69mm inner and 71mm outer diameter. I searched everywhere but i can't find. 😔
How do you get the sensor light to turn off afterwards? Will it automatically after the sensors are cleaned turn off or do you have to go to a workshop with a reader to reset it? Thanks!
excellent. Admiring you.
I own a bmw e92 320d 2011 and I have the red tyre symbol showing all the time and unable to reset it using the manual. Could it be the sensor requires cleaning to solve the issue?
Should you apply multi purpose grease to the abs speed sensor before inserting into the hole? Thanks.
Just putting it on the contact surface which will be the mounting flange. That will ensure it is easy to remove but you aren't coating the whole sensor body which would just pick up dirt.
And 3b stall speed monitoring
"don't get stupid with it" love it 😂
can brake cleaner be used for cleaning?
Can ABS speed sensor and abs brake sensor be use visor
Nice shed
👍
"Don't get stupid with it" lol
Can i install an abs sensor on it's opposite side? For example installing a drivers side sensor on the passengers side. Will it have different connectors, or is there anything else that might prevent me from doing so
Check if it says left or right when you buy them.
I don't like any pad that is not aggressive on disc. The OEM metallic type pad is nice and aggressive and is constantly skimming the disc to keep it true. Cast iron always shifts around, the higher quality iron mix and treatments to a lesser extent. Put in a pad that takes nothing or minimal off the disc (like ceramic) and you end up with a pulsing pedal. I usually get two pads per disc and I don't bother skimming inbetween. In regards to the ABS sensors, don't be scared of the cheap chinese ABS sensors. I bought a complete set for $60 from Bapmic and they work perfect.
Could this be the reason my abs and trac lights come on randomly
Clean with brake cleaner?
I’m getting the code 95 wheel speed and 41 gear monitor codes
Any recommendations on a obd2 reader for my 528i?
Thanks!!!!
Buy a KDCAN cable for BMW and use ISTA+.
es posible que cause vibrasiones en frio al estar detenido?
o algo similar?
Creo que es sensores sucios
So Nathan who is your 'Nipper' the apprentice?
How many abs sensors are there?
Hey, I just broke that effing abs sensor screw. Is that screw providers ground for the sensor?
No. The ground is in the wiring. The screw is just for mounting.
I have a 01 bmw 540i I can't the reluctor ring or abs speed senor ring any where
Front end or rear? If it's the front the you might have a tone ring (which is actually a disc configuration) and that is integral to the wheel hub. Does the speed sensor mount parallel to the axis of the wheel? If so then the tone ring is in the wheel hub.
Hi Nathan, I've got a similar problem with e92 330i. The code is showing up on right hand side rear wheel. I've swapped the sensor with a brand new one, but the error still shows up and DSC/ ABS doesnt work. What would be the next step? Changing the bearing?
Kamil
Does your cruisecontrol still work? Diagnose the car and see what fault codes you have.
@@ChangoeMotorsport it doesnt. Im getting a code about faulty speed sensor
kamil Stec whats the code number you see?
Could this be the cause of a dbc malfunction as well?
yes
Bait and switch video? When is the ring cleaned? Otherwise great video. Just take out the "and ring" from the title and you are not click baiting.
I like your video but must I like your shed more
I have a front right pulsar malfunction? Just had a new bearing installed and it came on the way home. ;(
You ever fixed it? I had the same problem , maybe I have a dirty abs sensor?
@@Gm29_mtzcould u help me, how u solved mate
So can we clean that sensor with brake cleaner ?
Yes i did
Liked the information you shared. You could edit this to about 4 minutes instead of 10; I don’t need to watch you Jack up your car from across the shop. BTW, I covet your garage.
ABS and Stabilitrak light are on after somebody used my car to jump off another car. Would the best suggestion be to take it to a shop to do computer diagnostics?
Yes. Jumping incorrectly can destroy the electronics on modern cars. It sounds like it fried something. I hope it's not your ECU.
Those jack stand will injure you or worse they were recalled
And nothing shown about the ring, mine is completely corroded and need s placement
You didn't show how to clean the ring. Bummer.
if i can learn to fix a BMW i can fix anything
That old man looks like he could use a Bologna sandwich! Lol.
This was an informative video which will motivate people to work on their own vehicles but in the world of mechanics we use torque specs. If you do not properly torque a bolt you are liable for a person's life. CYA and at least put a disclaimer such as "Follow your manufacturer's torque specs".
So true. My rack and pinion was changed and things weren't torqued to specs and my upper and lower steering knuckles came off as I was parking.
where is the ring on a x5 e53?, its not on the axle
If it's not on the axle it might be in the wheel hub if it's the front end? My BMW E63 front ring is in the wheel hub. Not so easy to clean and you will probably need a new wheel hub assembly.
@@dc857 yup it part of the wheel bearing, turns out the wheelspeed code I had was related to abs sensor.
@@class2instructor32 Glad to hear that, a much cheaper fix!
Canadian winters will not allow you to gently squiggle anything out...guaranteed it is rusted and seized in there Badly.
Long way to say remove sensor and wipe it clean and blow air into hole!
Nothing new here
God I fucking hate microfiber. That sound just makes my skin crawl, not to mention the way it feels when you touch it. Even thinking about it is awful. Great video though.
The brakes shake because you aren't using OEM or OEM spec rotors or pads. Are you sure they are new?
Friend.....cut the first 3;30 minutes from this video......
Don’t ever never grease your pins on bmw.
Could have lived without first 3:30 minutes of nothing.
Wtf wants a bmw? Oh wait period that think they r something cause of money. My bad
Or the ones that know what a real car feels like