Dangerous 3" Super Magnet Unboxing and Safety Testing
Vložit
- čas přidán 18. 04. 2017
- Here is how a 3 inch, 350 pound pulling force Neodymium Magnets is shipped and some different metal, safety test I ran before taking it out in the field or around my kids. The pull force steadily builds to crushing strength.
Here is the magnet used in the video: amzn.to/3lfs9Co
you might be able to find one stronger and cheaper on Amazon by shopping around starting from this link.
Check out my new followup video, 350lb Force Super Magnet? Prove It here:
• Risky Testing of 350 l...
Music: Europa by: / teknoaxe
#supermagnet #unboxing #testing
I'm an Amazon affiliate and clicking on the above link(s) provides a small percentage to the channel via Amazon at no additional cost to you. Thank you for your support.
Guys stop with hate, he’s just a guy that bought a powerful. magnet and thought it was cool
Chace, thanks for the feedback and kind words.
sharp magnetic knife next to a strong magnet. Seems safe
3 year late ratio
@@Javier-kg2ev same
That's awesome. See video of the half a foot block n52 . 5000 pound pull.also if you stick it to real iron or your lawnmower flat surface you won't be able to pull it off I have one half that size and it will pull my 62 inch woods mower with a big metal grasscatcher about 600 pounds of mower. all over the yard with the truck. We finally got it off by beating it with a rubber hammer till we could get it to an edge then we could pull it off. And I'm strong and 61 years old can pick up 200 pounds. These are amazing when attached to pure steel or iron. The hook and screw btw is not pure ferrous metal is why it's got a weak pull..
Gadget, thanks for your comment and feedback. Agree, using the magnet on pure ferrous metal works best.
Yes I've purchased 1 myself haven't had time for magnet fishing yet lol
Im subbing cause your channel is cool keep up this good and cool work!!!
Raspberry production s, thanks for the comment and feedback.
thanks.... worth watching.
Thanks Alison, Eti & Josh
I'm not an arm chair Physicist like some of your commenters. This video is for general CZcamsrs. That being said... I like the rolling metal ball "thingy's" on the tape measure "thingy" test. Good visual reference 👍
Thanks Mike, it wasn't meant to be serious. Always interesting the range of comments a video will get.
Thanks for the info. I'm thinking about getting a 5 hundred pound one.
Lewis Kingsley, thanks for the comment. Good luck with your fishing. I've been thinking about getting another magnet also, although probably not a 500 lb force one.
Looks like the outer layer is a shielding to weaken all but one of the poles, glad you added the grams weight btw (metric)
Jasman35, thanks for the comment. Could very well be on the shielding.
i have the exact same magnet its dope
oh yeah yeah, thanks for the comments. New magnet fishing design coming soon.
Just wanted to say that the diameter of the magnet is inside the black sealer. The outside is the casing. So it's really about a 2 1/2" magnet.
GeneF, Valid point.Thank you for the comment.
magnetic trainwreck ^v^ I subscribed lol
Thanks for that mate you got a thumbs up from me
Keyboard Warrior, thanks for the comment and thumbs up. Much appreciated.
5:51 ooooo that sound
Jed Finds, yeah its a bit scrapey, will now probably use that in one of my Halloween builds. Thanks for the feedback.
No problem! Loved the video by the way. I liked the tape measure part the best haha
Nice video my friend
Doesn't affect phones or watches either. I tried it! All all 👍👍👍
Roy Rice, thanks for the feedback. I'm assuming you are referring to digital watches.
Locktight on threads is helpful
JON Gergeceff, great idea, I think I'll try some Locktight before I go out fishing again. Thanks.
Good job
Thanks Stephanie, appreciate the positive feedback.
I have a giant neodymium magnet to, it is 9cm or 3.5 in wide and 2 cm or 0.75 in tall it’s pull force is 300 kg or 661 lbs !
Win Win, your magnet sounds awesome have you gone fishing with it? Check out my new design: czcams.com/video/sm5dbfpqaVo/video.html
Is there any type of gloves you recommend to wear when handling with these magnets?
Cameron, leather work gloves or thick water proof gloves are best to use with these magnets. Here's some examples: amzn.to/3fkp1Ey or amzn.to/31lhpcH
I'm subbed already. I would recommend a lock washer between the eye bolt and magnet. I have one on mine.
that's a great idea, I think I'll give the lock washer a shot. Thanks for the suggestion.
yup... thread locker as well.
the hook is a special material. its lightly magnetic and there will be no rust at the hook
The hardware must be somewhat of aluminum. It looks really strong. Cool video. Keep up the good work. Much love from Hawaii. Aloha
Coco Nut, thanks for the feedback. Glad you enjoyed the video.
Stainless
You need to put some "thread locker" on that eye bolt.
Larry, will do. Thanks again for another tip.
I wish it was hung from a good chunk of steel and did a pulling weight test. The entire surface of the magnet attached to steel would be the test of did he get ripped off or not.
Right. I have tested my 480lb magnet with pure steel plate and it is extremely hard to get off.
For the folks who like the metric system? United States, and Belize are the only countries still using the Imperial system of measuring.
Do you know the history of why we measure in feet?
Very funny, take it easy and take care of yourself
Ian Mangham, thanks for the comment. I'm glad you saw this video in the light it was intended.
Hey all you negative people leave him alone. He is doing an awsome job. I bet some of you don’t even know what is like to put a show together knowing jerks like alote of you are out there so give him a brake I thought it was good.
george, thanks for the positive feedback. Agree, putting videos together are not always easy. Always striving to get better.
It was my pleasure. I have subscribed and can’t wait for more videos
george, thanks for subscribing, I strive to post a new video each week. Always have several projects going on in parallel.
I'm guessing that the eye-bolt that came with it is stainless steel. Depending on which alloy of stainless steel could greatly reduce the magnetic attraction making the eye-bolt much easier to remove from the magnet.
John, thanks for your feedback. Agree with your comment, spot on.
Hey dude, you did just fine. I don't mind your mispronunciations one little bit. 9 out of 10 people will mispronounce Neodymium. These are a bunch of armchair critics that don't have the curiosity to even try these things, and a bunch of "I'M MISTER PERFECTS" that have nothing better to do than criticize others. I was a machinist and I applaud your use of a straight blade screwdriver to tighten that screw as a #4 or larger Phillips drivers are relatively uncommon. AS A MACHINIST I would have done the same thing if I didn't have the right tool.
What I like about you is that you are curious, friendly, and will happily share your experiences. You have far more personality than all of the armchair critics that have nothing better to do than piss on others. Good for you!
"Illigitimi Non Carborundum!" That's a mock-Latin aphorism meaning "Don't let the bastards grind you down!" I'll probably end up with 10 of these idiots telling me I got the Latin wrong. They can all clean the slippery end of my dipstick.
Thanks John again for the positive waves, you are a good soul.
Think the eyelet and screw are stainless that's why they don't stick that strong.
Steve, maybe so. Thanks for the suggestion.
Steve Yoshikawa I was gonna say the same thing.
Steve Yoshikawa also they would be somewhat magntized. From sitting with the magnet for so long shipping
Steve Y nah dude this gust is just a fucking idiot
Steve Y yea
Wow..pretty cool. Maybe next vid you go fishing? See what kind of crap you can find chucked in the waters.. my son found a little one but dang if it is powerful..we will try our luck fishing. We'll see what he gets too.. be safe y'all, kind words only to those demonstrating .. unpredictable but fun to watch. Blue
Blue Skeleton, thanks for your comment, you can check out my fishing videos here: czcams.com/video/2QqgeLe8IKc/video.html and here czcams.com/video/9yHPcLiy7_8/video.html and here czcams.com/video/QmBbRYWo49c/video.html
There are different grades of neodymium, but the pull force isn’t 300lbs for everything. It’s pull force over a flat surface that covers the whole face of the magnet is what they measure, not some random small object.
GammaRay326, thanks for the feedback and valid point. Check out my new followup video, 350 lb Force Super Magnet? Prove It here: czcams.com/video/wXmcWn6VT3I/video.html where I do just what you mention above.
Did you hang the camera from the ceiling? Is that the swaying I'm seeing?
I did, and have since gone to a whole new camera rig setup.
Now the Stainless steal bolt is high quality. The more pure Stainless steal the less magnetic it is. Number on that thread is pureness value.
Ra Drumba, thanks for the additional info on stainless steel, much appreciated.
Use Loktite (red) to keep threads tightly cinched.
rayluc 100 thanks for the suggestion, I'll try it out.
I was thinking that you will tell about some uses of the magnet and demerits.
Thanks for the feedback. See the Make It or Break It links below for other super magnet videos I've recently made that go into the details you're looking for.
the magnet's hardware is maybe stainless steel which may have no attraction and attraction on different parts of the same piece
Run the rope through a cut plastic pop bottle and doing so will keep the magnet from snagging on logs.
Phil, That's exactly the design used. Thanks for the feedback. Here's the video: czcams.com/video/2QqgeLe8IKc/video.html
Here's a link to the video where I step you through how I made my fishing rig using the magnet you see here. Check it out: czcams.com/video/2QqgeLe8IKc/video.html
Do they break apart easy? Should u sheath it somehow before fishing with it?
Anthony, my magnet has a steel cover on everything but the bottom which has protected it well so far. Check out my magnet fishing setup here which I think will answer all your questions.
czcams.com/video/2QqgeLe8IKc/video.html
good luck. Here's my magnet fishing video where I actually use the rig:
czcams.com/video/9yHPcLiy7_8/video.html
good luck
nice i have a 400kg one i use for magnet fishing
brandon slingsby, how's the bigger magnet working for you? I've seen folks lose larger magnets because they clamp onto to something like a conduit pipe and the rope breaks...
@@MakeItorBreakItNow its sound, if i get the magnet stuck i just chuck a grappling hook in after it
@@MakeItorBreakItNow i use a thicker rope, it is like 3 of them ropes put next to one another
@@southyorkshiretreasurehunt8513 you got some good solutions there, thanks for sharing.
@@MakeItorBreakItNow sound m8
Keep up the good work
thanks Tanner, appreciate the feedback.
Tanner Vlogs I agree
Thanks Teela for the positive feedback.
neoBinium! Carpenter to Physicist!
Recently got a 290lb magnet.. it’s not as powerful as I’d imagined it’s be. I can easily hold metal in palm of bare hand or fingers, with magnet on the other side, without the force being painful (though gotta be careful about skin being pinched) .. I’m really curious about the 600-1200lb monsters .. Would the constant pressure cause serious damage? I know the real danger is from accelerating objects,
Adams Brew, thanks for your comment. Agree the real danger is accelerating objects. But with larger size magnets like what we're talking about here I think long term static (constant) pressure would be a problem because eventually you would shift say your hand the the pinch factor would be high. I'm not willing to take that risk but interesting question.
Check out my new video where I go magnet fishing with this rig in the ice cold waters of the Adirondacks: czcams.com/video/9yHPcLiy7_8/video.html
Trillions like and best comment for you because you are best on Earth and follower respect you,we need videos in Real 120fps or 240fps 4K,8K and Sound in FullHD Surrounded
This video was published at 1080pHD, most all my videos are HD. Thanks for your comment.
Directionally drilling into a barrel and enriching my fishing line
Nestor Galo, thanks for the feedback and comment.
Don't get all the negativity.Thanks for the vid.
J Raymond, thanks for the positive feedback. Some of the comments are surprising, but that's CZcams.
Great video :) ignore negativity
Ra Lu, thanks for the positive feedback. Always appreciated.
I thought he was gonna correct 'neobimium' at the end but I thought wrong.
what can I say, its a trip word for me. In follow on videos I did correct the way I said it. Thanks for you comment, always appreciated.
“Neobinium” that mentally hurt me the whole video
Blake, sorry about that. I'll try to remember to get it right during my future super magnet videos.
Make It or Break It don't worry about it. Neodymium is a ridiculous word
BlakeMeyer239 he said allumilum too.
sillynium next XD
BlakeMeyer239 ikr
Yes two 250lb pull magnets slammed together pinching my palm got a welt under my middle finger ouch be careful out there
Michael, Thanks for the tip. Agree, these magnets can really hurt if you're not careful.
They lessen the magnetic property on the eyebolt for easier mounting and unmounting .... just fyi
mousescorp, thanks for the feedback. I'm curious how you found this out.
A little of experience and a smaller amount of common sense :)
I ordered one from AliExpress
Waiting for it to arrive
Interesting, did you get a good price? I'm in the market for another magnet.
@@MakeItorBreakItNow D60MM - 14.10 dollars 112-150KG
D75MM - 160-200KG 23.34 dollrs
@@tricksfun2778 that is a good price. Smart buy.
@@MakeItorBreakItNow thanks I loved your video with the magnetic experiment👍🏻👍🏻👍🏻
@@tricksfun2778 stay tuned for more to come. I use magnets in my builds all the time.
Please post the link for this magnet 👍
Steve, here is the link to the magnet I have: www.amazon.com/gp/product/B01JK20IR8
Thanks for the suggestion. I'll make sure to post the link from here on out on all my super magnet videos.
.
Well on the one hand he's a pretty boy but on the other he is a damn fine actor. So take it as you will. I look like Ozzie myself.
Dano1947, thanks for brightening my day.
Yes let's put something you have to screw with a screwdriver on a magnet.
Manufacturer: "On the most powerful side!"
Proceeds on putting in the instructions "Please screw in with a FLAT screwdriver"
Check out my new followup video, 350 lb Force Super Magnet? Prove It here:
czcams.com/video/wXmcWn6VT3I/video.html
My finger is still healing after receiving my 1,000 lb force magnet. (They did not tell me it would want to close my car door from 1 foot away.) I had an extremely minor incident.
i got 2 x 400kg one silly me they connect 1 blow up set my pant on fire waste $45 so stuck 2 together now super magnet be very careful they hurt finger stuck middle. i found only out side they stick too magnet the middle no stick but get 2 put together they work so much better.
aussieexxy kane, thanks for leaving a comment. Agree these magnets can be very dangerous.
you magnetized the tape measure when you tested the distance.......you will get an accurate distance if you measure when not attached to the magnet
Jeremiah, thanks for the suggestion, I'll remember it for next time.
Probably a good idea to blur out your address when showing stuff that's been shipped to your house man. If I can read your city, state, and Zip....the street name and house number are printed much bolder. Just trying to look out and make ya aware my man. Aldie, VA 20105...blur out the small square "handling label".
Everyone might send em some poop from poopsenders.com. trust me its a thing
“Alunimumm” XD 5:50
Yeah in the first couple seconds. he says Neobymium ... the guy sure is an expert.
Damn dude you look like Gordon Clapp from NYPD BLUE.
Dano1947, thanks for the compliment, I think...
Check out my newest super magnet video: Super Magnet Sculpting Toy, How to Make One, Easy DIY by clicking here:
czcams.com/video/2ygE9TJs2Fo/video.html
I don't know how hevey a 85 Honda big red 3 wheeler 250cc is but I pulled one with all the tires flat and I have the same magnet
Around 400 pounds
you got to get the aluminum magnet
Miguel, thanks for the feedback.
The bubble wrap just keeps the neodenium magnet from bouncing around I guess. What's an inverse square law? It ain't square, it's round. And the law ain't got nothin to do with this!
What grade is the magnet?
G S, good question. Check out the link in the comments section for all the specifics.
Would this stick to a metal filling? That would SUCK
Lil overkill with those gloves
RC Racing Twente, maybe so, that video is several years old.
the rope hole tie and bolt sent supposed to be hard to remove from it lol I make this
Amy, thanks for the feedback. Agree.
+Make It or Break It lol its her son miles lol sorry I didn't see I was longed in on hers
+Make It or Break It this things are very very easy to brake boons with I have one that's 750 lb and I almost lost my toes
Amy Fleming, agree that's not my hand, but nearly was on several occasions. What are you using a 75- lb force magnet for? Where did you get one?
+Make It or Break It I miles Fleming make them so I bought it home
Dad is going to have a good night
I swear I thought he was going to poke his eye out with that flat head.
that metal loop thing that came with it will probs be a cheap stainless so very little iron very weak pull
Simon, the loop is actually stronger than the magnet, check out this video to see: 350 lb Force Super Magnet? Prove It here:
czcams.com/video/wXmcWn6VT3I/video.html
Make It or Break It no I mean it being stainless is why its not getting much of a reaction from the magnet, maybe cheap was the wrong word, but not 100% stainless as the magnet is still trying to grab it
SimonCUnningham. There are many grades and alloys of stainless, each having different properties. In the machine shop my first test of an unknown stainless alloy was a magnet test as stainless alloys are broken down into 2 major groups being "Magnetic" or "Non-Magnetic". And even within both groups there are variations of just how strongly they are attracted to a magnet. And ALL those alloys are considered to be 100% stainless steels as they all have an iron base and then alloyed with other non-corrosive metals and carbon in varying degrees and combinations.
One example of the differences is that if you have an Induction cook-top stove and want to use stainless cookware, the pot or pan MUST be made out of Magnetic Stainless.
Neowhatium?
Just to let you know that that was a Philips head screw not a flat head
Just to let you know I was a professional machinist and if I didn't have a #4 or #5 Phillips bit in my tool box I would have done exactly the same thing he did. What amazes me is that I need to let YOU know that he KNEW he had the wrong kind of screwdriver. And I just need to let YOU know that your "information" was pointlessly condescending. You must be PROUD!
It would seem to me that the "warning label" should have been on the outside of the box rather than on the inside.
Its a bit late to give a warning after the box is open.
Agreed. Never really thought about it that way...
Between "Neobinium" and watching this guy try to put the flat head screwdriver in the phillips screw, I literally wanted to beat the stupid out of my own head because I was afraid it might spread... and then he called his ruler "alubimum"..... Smfh.
Trippy 😀
@Brady Hartsfield Don't be Landon 🤣
Neo🅱️inium
That's one of the sexiest magnets I've ever seen LOL
I mean you did order the magnet through Amazon prime, it's probably gonna ship quick
Deep Bass, thanks for the feedback. Yes, I did say it right in the follow up videos below. Thanks for watching.
Enjoyed it
Good pm ,where.can i.buy the magnet what name store here in manila,.thank you refly pls.
Check the main info section below the video.
Jeez put some positivity in your lives people so what he made some mistakes calm down ;-;
sharp metallic object near very strong magnet? Hmmm
Dang...click baited by the thumb nail lol
for those who have asked here is a link to the magnet I have for all those who have asked: www.amazon.com/gp/product/B01JK20IR8
plants247 you're welcome. Thanks for the reply.
plants247, thanks for subscribing.
Why thumbnail was a scary type ? 😏
lokesh 2229 lol
lokesh 2229 ooooooo
Hi mike I was wondering how many subs you have but it won't show?
you can never have enough, can you...
Mike Meyers You can't
Tell me is neodymium lose it strength
How did you managed to get yourself cut before even open the box?
JoshQun, thanks for the feedback. It's a long story...
Because the eyebolt has more aluminum in it then ball bearings
You would think he would correct his neobinium mistake after reading the box label
DANGER DANGER IS A MAGNET FOR GOD SAKE
William, very much so. Thanks for your comment.
Magnets do nothing to computers. I tried it!! All aok . 👍👍👍
Roy Rice, thanks for the feedback on your computer test, interesting.
I love ,i kom
Could you destroy a phone with this magnet power ?
Strange Amazon should have put a label that it can't ship by air freight just land freight only. A magnet properly shipped should be in Styrofoam not butcher type paper. Amazon is slipping on FAA rules.
Kevin Perry, a very good point, thanks for the comment.
“Alumimum”
Is it lose magnetic power
AK Ke Tadke, thanks for your comment and feedback.