RX7 13b (RX8) 6 Port Now BridgePort Turbo - T2 Transmission And Lots of Upgrades
Vložit
- čas přidán 28. 04. 2023
- Well pulled the Old Unknown RX8 Engine Out And Installed The Drift Cars Half Bridge Port Engine In with my new Custom Front cover Coil on plug set up and Electric water Pump and Upgraded To a Borg-Warner S366Sxe turbo
- Auta a dopravní prostředky
This video made my brain melt, there’s way to many things I didn’t know could work the way you are making it work 😂
I make all kinds of things work and. Make all kinds of parts to make things work keep watching. Go check out the bmw z3 rotary swap vids
Thank you for sharing these engines are still around in junkyards and way less than an fd swap or t2
They are and still way cheeper than most rotaries at jdm importers but if you want to do a turbo one 4 port is the way to go super cheep as they can be had for like 1200 or less and way less dicking around with intake valves lol
I love that someone is doing something with the neglected msp engine cheers man.
I built a. Turbo rx8 for a customer along time ago these engines boosted make. Awesome street cars more tq and. Power sooner and was always impressed with the heavy ass rx8 pulling like a train from low rpm to redline. So i was like lets put it in a fc half the weight. And all i can say its this thing is just a blast over a t2 car so much more power and. Tq and. The 10k rpm revs. Over 7500 so the power ban is way bigger people dont understand that aspect you have 3000 more rpm of power ban
Im psyched to drive it 🎉
Yup
Wow dude i just have an 08 rx8 that shit is metal😮
Thanks
Love this build, can't wait to see some more. Keep at it!
Great knowledge , that coil ideas AWESOME!!!
Thanks
Great stuff ! your always doing very interesting work.
Thanks
Wow man you do some awesome fabwork you put alot of fine details into this engine setup i love how simplified you made it looks amazing bro nice jib 💯🙌💪✌️💚
Thanks most people don't. Even notice the fine details on stuff it will get cleaned. Up more and. More as there is a-lot of other things to do on this fc lol most people dont know its a rx8 engine lol there like. How did you swap that manifold ext lol
Stoked
Me too as. I will acutely be able to put the power to the wheels Now And. Not leave it in my slipping clutch and rattly transmission lol. The old na trans took 15 psi of boost for about two days. Then 10 for a few weeks and. Settled at 7 lol
Love the coil on plug setup. What coils? What boots did you use?
I've wanted to do something similar for a while. Although I wasn't sure about mounting them. I guess if you're not using the knock sensors that's a good spot.
They are rx8 coils some random boots. I found. At the auto-parts store and i still have the knock sensor
bad ass
Thanks
On the direct coils, I have a set of Nissan 370z coils I'm gonna experiment with. Nice work on yours.
Fyi they are the same coils just different cop boots
I just went for the shortest option and. Found some boots and springs at the auto-parts store i used to work at 100 years ago so i dug though every box till i found something that would work
how did u get that turbo exhaust manifold do you sell any?
Rx8 Bridgeport 13BMSP Swap To Fc3s rx7 - Building the Turbo manifold
You can watch the video czcams.com/video/Tgjoq6vawqQ/video.html.
And Yes but made to order
Look good just need different intake
Um well its a rx8 engine. So its a rx8 intake manifold and It is very modified as it runs the 5th and 6th ports and ssv valves
@@TheRogueOnes I know I own a FB 6 port Turbo
Dude i need intake manifold work, its Bridgeport, i need to eliminate ssv valve and all unnecessary stuff for turbo.
I run every thing but the vdi
Im in process of my 10thAE RX-7 13BTURBO BRIDGEPORTED engine, and im looking for a few items an fd upper intake &throttle body.. And Engine management ststem. If you have anything Available.. This is my 1st build , ive had the car for 25 years now..
I may have things depending on what you exactly need
I don't have any new intakes avalable as for ecus I can get haltech
@@TheRogueOnes as it says in the post possibly be appropriated!
@@TheRogueOnes mainly the FD UPPER intake manifold and adaptor with throttle body..
What's with the pride colored engine?
It is. Not any more as i said. In the. Vid. Those were all random silicon hoses i had at the moment from leftover projects colored hoses were netter than no hoses as. I was waiting. On other hoses and i only have limited. Time to work on my own shit and. It needed to move all the. Rad hoses are aluminum pipe now
How mush Power do make that engine
Hard to say as. I have not had it on the dyno. But with the 366 at around. 12 psi i would say its close. To 400. With a-lot. More tq than o t2 engine. The big thing is how dig the power ban is as it revs to 10k rpm
Also wheres your shop?
Its in upstate NY 30 mins from albany