4AGE 20V AW11 MR2, The Poor Man's Ferrari [EP6] - THE SKID FACTORY
Vložit
- čas přidán 15. 06. 2020
- Support us on Patreon: / theskidfactory
Buy merch here: www.theskidfactory.com
Today on The Skid Factory, AL & Woody drop the fuel tank to replace the standard pump with a Raceworks 265LPH E85 compatible fuel pump and then refit the 20V 4AGE back into the car.
Woody then matches up some radiator hoses from a few different cars to sort out the cooling system.
If you like what you see then Share it with your friends and don't forget to subscribe and hit the bell for Weekly episodes!
For updates keep your eye on The Skid Factory (TSF) here:
woodrigos?...
theskidfact...
/ theskidfactory
turboyodats...
/ theturboyoda
Please note: We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy. - Auta a dopravní prostředky
Want a sweet birthday gift? Send your missus to www.theskidfactory.com to grab our Birthday pack!
www.theskidfactory.com
😂 I couldn't find the birthday pack 😂😂
No, Woody, scratching the rocker cover is NOT "Gay". Happy Pride Month.
19:40 woody,that's questionable behaviour
@@mattgraham1983 It will be up very soon, Woody went off half cocked like the best of us.
@@theskidfactory no worries 😂😂 we are only human.. I'll definitely get one👍👍
Al- "you coulda painted the gearbox"
Woody- "i did..."
Al- "looks shit"
😂😂😂😂
wouldnt it be easier just to buy a corolla and drive it in reverse?
Yes
Sadly, yes. In the case of the later MKIIs like mine, a Camry in reverse will be similar.
Al is a great mentor, mechanic and entertaining commentator.
Thanks guys!
The bit about your missus driving for 3 days with the fuel light on?
I can totally relate.
Had me in stitches! :D
Do what I did last time I had to do her pump because she likes to drive them with no gas in the tank; mount the tank level sender a bit higher and “recalibrate” the needle to where topped of is even at the “F” line.
Seriously not joking. Solved my issue on the second replacement fuel pump. Effectively reduces the useable capacity in the tank by a few gallons but no more rescue missions or burnt out fuel pumps. 🤣
AL: "Make sure you edit out the swearing"
Kinda expected a supercut of all the censored swearing Woody...
Next time.
A beep montage? 🤣
@@David-xl8zf
i remember an episode of "father ted", where they normally say feck, in this one they did not, and used as many f-bombs as they could, if you have never seen it look it up
Watch to the end lol
Al the pirate only goes to see movies that are rated Rrrrrrrrrrrr
Thanks dad!
Avast ye scurvy dogggss
Pirates like the letter "R"...but his real love is for the "C." :-D
and his favourite car ... civic type RRRRRRRRRRRRR
@@aussiebloke609 Groan!!!
Lol, 'expert undercar Slavic squatting'.
Keen as for the bloopers and swearing reel ... like the bad obsession . I wanna hear Al's pisd off rants ..
Nice to see Woody doing the bulk of the work on his car. At least Al's not hating on the MR2 as much.
10/10 effort for Al singing FotC
What a gentleman wood always lubes it up 19:40
Never go in dry. Its hurts lol
I have learned today that Al is a Flight Of The Conchords fan, and I'm pleased to hold this knowledge :D
"Genuine Rotas" had me crackin 😂😂😂
This is a well deserved algorithm bumping comment. Also, mint Simpsons Sea Captain impression. Cheers homies!
Add extra bump
Marge: [laughs rakishly] Does that earring mean you're a pirate? [refers to earring in pirate's right ear]
Pirate: Kinda.
- [1F17] Lisa's Rival - The Simpsons Archive
Love the shots fired from Al with regards to woodies painting skills 😂😂😂😂
The best part of these amazing videos is hearing Alan laugh from behind the camera.
So nice to see father and son working on cars together
Al "under car Slavic squats " for those perfect mechanics legs lol
Classic banter at the end. Woody copping it
Woody mate, you are smashing it. You too Al
Although a part time model, Woody definitely has to keep his normal job.
I feel like this is a flight of the Concorde's joke
With that kind of mustache, you probably have to go incognito on the browser if you want to see his modeling.
99% done... 2 mins later got lots of stuff to do. Cooling system, wiring, fuel system.....
I'm loving Al's sense of humor sneaking in more and more👍
What a good father and son program 😁
This little nugget is going to sound sweet and won’t be a slug I reckon. Can’t wait to hear it fire up 👍😎
Al's voice over is awesome. Hopefully he doesn't hate it so you can convince him to do it more often. 👏
That thing is shaping up really really nice guys. Engine bay looks bloody good. Hope Woody eventually decides to eventually go "full resto" on it! :D
The skid factory should be on NBN. The boys would have half the nation watching!
Turbo Yoda voiceovers stay undefeated!
nice flight of the conchords quote at the end :)
The shot of the engine rising thru the side vent at 12:00 was so good.
I love the look of those ram tubes..
The engine bay looks excellent Woody! Loved Al's voiceover and I was cracking up at his pirate voice.
The narration is now sweet and funny as hell bro. No diss to woody doing it either but this is awesome to watch. Squinty pirate eye.....I'm sure that's a name for something else too.
I believe it's the name for the condition brought on from eating dodgy seafood.
@10m45s: "...backwards Corollas..." OMG, it's the Atoyot Alloroc !!
😅 those last couple of minutes
Very much enjoy watching you work on the aw11
More and more of this build I watch the less bummed I feel about working on my project 70-somethin' chev K20. Most sophisticated thing in it is the radio that doesn't work...
Nice to see it coming along.
Don't ever stop Al! We now and shake with you! Adds your character to the filming :) cheers guys
What about a video on the connector types. Run thru the various ones. How to assemble them in detail and how to identify them. Most importantly what places carry them.
Engine looks brand new! Tidy work!
Genuine rotas! Another great episode, as always
Pirate Al, yaaaaas
The after credits never disappoint 👍
Ilove that ride had one lots of fun 🙌🙌THANX GUYS much love from Detroit 👍
Keep up the good work gents, nice to see some things never change, in a good way. Looking forward to more.
Bit of a lovers tiff at the end, pressure is getting to the boys
"Squinty Pirate Eye for alignment" Is that included in your training video on the mech store?
I read some reports on fuel ageing, actually the octane number is not deteriorating at all, however the light hydrocarbon chains evaporate and makes the fuel harder to ignite and also slows down the flame speed during combustion. :)
Al is the definition of a windup merchant.
You two make a great team. Thanks for the always good content, and the laughs.
Love the idea of using a bent valve to lock the flywheel, Why didn't I ever think of that
Woody bought that one to the table. Genius level.
Best CZcams show.
These series takes me back nearly 20 years when I did this same swap. The stock AW11 came with a factory water oil cooler on the lower right side of the engine bay firewall...thats why it had that factory sandwich plate.
Epic little build I’m loving this series.
You guys are great, keep kickin ass this series is awesome.
been good to drop around again fellas...even if its only via the internets...
Noice. Another golden episode of the skid factory. Cheers. Looking forward to the next vid 👍🏻🙂
Just pure gold!!
Great work guys, always hate to see the video end
I get the impression Al is never any further than 3 lemon squashes away from "annoying 11 year old obnoxious boy" mode.
Another fantastic episode guys, keep them coming!
Great work legends!!!
Didn't realise I could get so envious seeing that mint fresh painted engine and transaxle🤩
That thing is gonna be so much fun!
Thanks for sharing your knowledge with the rest of us 🙏
Coming in July: Al's Greatest Hits
Can't wait!
That looks like one of those on/off clutches , good times.
I say it often but this maybe the best show on CZcams! Keep up the fantastic content.
Hey all quick tec tip, some times you can use a large socket over the clutch plate spigot thing and line them up the the fingers on the Pressure plate
Yes Woody, You have been there before with the fuel tank, You would have seen Marty from MCM struggle with his black MR2 fuel tank.
Al's voice over this go... 👌👌
You're lucky the fuel tank had a drain plug! The early ones didn't. I had a hell of a time doing mine on ramps and jack stands in the driveway, hahaha. So much easier to get all those back lines with the engine out and the car on a lift I imagine.
Looks great boys
I bloody love this channel. not sure why Al is so happy, maybe it was filmed on pay day 😂
favourite quote from this video is "squinty pirate eye" 🤣🤣🤣
Aw that engine and gearbox looks mint! Nice work!
Great job as ever gents. Thankyou for the content the mrpoo is starting to look great
Awesome Flight of the Concords reference at the end JJJ's forever!!!!
They could be a part time comedy folk duo, but they'd probably still have to keep their normal jobs.
cant wait to hear it run!
great progress!
Gold as always boys keep it up
al & woody are legend
Love the show!
Loving the work. Awesome.
The Skid Factory is my favourite chillhop station.
Sturdy safety thongs Al! Skid factory keeping me entertained in Lockdown
Al doing the commentary is cool. I'm digging it.
looks awesome ....great work guys
I always wondered where they managed to fit the fuel tank in those things. Pretty interesting.
How have no idea how perfect this videos timing is for me. Doing the same jobs on a different car that I was hoping for some guidance on haha
THANK YOU FOR OTHER GREAT DETAIL VIDEO
Yeah it's really good to see little tech bits of a build you don't normally see at the machinist etc..
Thanks guys for another slice of awesome viewing 🤙
I hope you respray the whole car after you're finished, the new paint on the engine bay looks great
Thank you I needed this. I just got word this morning that my great grandfather passed and I needed something to take it off my mind for the moment. Thank you for the good content!
Sorry to hear of your Grandfathers passing mate, our condolences.
@@theskidfactory thank you, raise and drink a lemon squash for me for him since I can't drink.
My condolences too. I don't know you but I'm sending my love.
Flashback of Marty wrestling with his mr2 fuel tank
25:42 you guys are like father and son now
I laughed so hard at “backwards Corolla”
Yew!!!!! Been keen as for this!!
That engine looks awesome in there! 😍 Very tidy looking aw11 engine bay indeed. Great work. 👌
This thing is going to sound mint, looking forward to seeing the exhaust system build. No bigger than 2 1/4" I hope.
Keep up the great work.