Secretly building our mates car without his permission
Vložit
- čas přidán 16. 11. 2020
- Our mate Justin owns this Volvo 940GL and had plans to convert it from the original B230 Red block to a Turbo 1UZ for over a year but has never had to opportunity to complete the task.
Justin's Partner Anne contacted Al to see if we could smash out the project in 6 weeks as a surprise birthday present for Him. We said yes and took on the project in between building the Torana.
Ebay Turbo can be found here: ebay.to/3pzA1jO
upgraded waste gate flaps here: ebay.to/3pHwqR4
Support us on Patreon: / theskidfactory
Buy merch here: www.theskidfactory.com
If you like what you see then Share it with your friends and don't forget to subscribe and hit the bell for Weekly episodes!
For updates keep your eye on The Skid Factory (TSF) here:
woodrigos?...
theskidfact...
/ theskidfactory
turboyodats...
/ theturboyoda
#Volvo #940GL #1UZFE
Please note: We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy. - Auta a dopravní prostředky
Ebay Turbo can be found here: ebay.to/3pzA1jO
upgraded waste gate flaps here: ebay.to/3pHwqR4
Legends! Boost to the moon is also enjoyable while it lasts...
Out of curiosity, why not use one of the cheaper ebay turbos that doesn't have the internal wastegate?
@@jonathan7744 I'd say because external gates are expensive and more complex piping requiring more room. Internal gates are good for heaps of power also when ported correctly.
Any links for those clampless exhaust slip joints for Aus, struggling to find em.
@@RAZOR69ER Just type "exhaust slip joint" in Google mate. ecsexhaust appear to be cheaper from their own online store than on their ebay site (2.5" $18 vs $25). I'd think most performance shops or muffler shops would have them also.
absolute legends
energy polarizer, is that some snake oil shit?
@@SloppyMechanics look up Peter Brock energy polarizer. He's an Australian motor racing legend that headed up the performance arm of Holden, in the 80's he wanted to put crystals in the cars to make them faster or something, he got fired around that time.
@@ryantilley-general.shenanigans Have to admit, some one made a bunch off it.
@@SloppyMechanics crystals are used for a lot, lasers diodes, lenses, resonant clocks(worlds smallest clocks built in to computer chips) just to name a few important ones so it’s not that far out there
@@CorruptInfinityOfficial in all those applications the crystals are used as a component with a purpose. where as putting them in a box and screwing them to the firewall serves no purpose more like a lucky rabbit foot or a 4 leaf clover lol
Al's red block comments just triggered all of Sweden
Eh, nah. Those that know how to put power to these engines, those i know personally, and i know a few, are chill people. Kinda like Jamaica Sweeds. I guess you kinda have to be, going 270~285 in that brick kinda leaves other things behind.
The thing is, i am not triggered, here in Sweden there are loads of them, easy to make pretty big power. i don't understand how people don't know how to make them run good. They are the easiest engines to work on.
on a 940, as long as the ignition box is fine, the wires are fine and not rotten, and you have a working coil. and no oxidation in the distributor at the back of the head(its mounted to the cam). This is very simple Bosch stuff from the 70's. If the ignition is fine, fueling is also very easy, you have a fuel box(that is separate from the ignition) if thats fine, check the wiring and injectors(usually never an issue)
If the car is still not running fine, check the Narrowband (its a very basic wideband solenoid that knows rich, lean and in between)and the usual culprit: the MAF.
Wanna make power? as long as the engine has compression(usually 8.5:1 on the NA, 8.0:1 for the turbo on the 900 series and later 700 series). rip all the electronics for the engine, put in a good ECU you know someone can tune. a set of injectors and a turbo that fits T3 and has an internal gate and of you go.
Stock NA engines are good for 200KW if someone is good at tuning, i've seen stock b230FK reach 500HP on a engine dyno(not american hp, rest of the world hp) or about 400KW.
But that is very rare and the tune is going be very wonky to not make to much torque, it kills the stock rods.
Oh and its easy to kill any engine, i've seen people kill volvos on 200 crank hp too if you dont know what you are doing.
A small flinch might have happen as a owner of many of these.
One of them being a rallycar that’s stock with only a tune and a cam making 151hp at the wheel (they make 131hp at the engine from factory). And there are many turbo bricks that makes good power.
But then I get what he means as well so :P
@@Zesserie in Australia, they are like a perfect storm of do not want.
In a country that mostly hated imports at the time, volvos and saabs were the oddballs of the euros. Not many bothered to understand their workings, the owner were typically weirdos, parts were expensivish and took a while to get in, and at that time, injection was uncommon, finicky and weird. Alot of mechanics didnt want to know about it.
So all that, combined with the reputation of being wonky dull cars, is why most guys have similar comments to Al. He knows full well what they are capable of.
Love the no bullshit advice "You can't choke it up with a smaller housing and call it responsive, it's not how it works" - never change Al.
Hey. My redblock makes plenty of power with its single SU carb and mismatched plug wires. Easy 70hp at the tire.
Probably safer to bounce off the limiter than a 1UZ too
@@Jake_Hamlin Limiter? What's that? Mine just goes till the carb runs out of fuel somewhere around 5000rpm
@@aaronjanzen2818 i had an injected 5 litre commodore that used to do the same thing 😜😅
@@aaronjanzen2818 If you fit a good carb you just peg it until the valves float, it's like nature's rev limiter
I say thank you to Anne, because she got this project started.
Here in Sweden people make really good power with the redblock B230 actually. Not as easy as with a more modern engine of course, but they are often seen delivering over 4-500hp. Seen examples over 700hp as well.
The engine is also very popular in N/A form for competitive use in rally and rallycross, often (with aftermarket cylinder head as that is the biggest stick bottleneck) with over 300hp naturally aspirated.
In Canada too
yeah but in Oz it's not common obviously, being a Volvo
Always love rewatching this channels series. So much knowledge!
I already thought you pair were some top blokes but after this you've been elevated to outstanding human beings. To do that for a mate is just next level guys. Be very proud of yourselves
"as you know we prefer superchargers" THE DEVIL HAD AL'S TONGUE
Nothing better than sitting down once a week with a meal and watching The Skid Factory. Keep up the great content guys definitely improves my week!!
Shared this episode with a mate that lives in Volvo land & has a thing for 940's- thought he might be interested....
Had coniption fits & all I could understand was "RED BLOCK LIFE FITTA!!!"
That & something about rare 1UZ expencive/can't get.....
"LS the world then" & haven't heard back since.....
Love ya Hompe!
And thanks Skid Factory- loving the stop-motion build, it'd make Ray Harryhausen proud! ;)
Yeeessss! Oldskool Volvo! INSTANT LIKE!
About those weights, they are supposed to dampen vibrations and i think they are also used to match the front car weight to the springs. V6, B230turbo, D24TD all weight differently so they use weights to match the springs.
There are 2 MASSIVE additional weights INSIDE the front chasis rails, to extract them you would have to remove the bumper + bumpershocks.
12a in a Vitara!? What a legend! Sounds like a chill fella to hang out with. Good on you Al for doing this build for him, I'm sure he loves it.
I like this style episode, kind of a happy medium between the show every step videos and previous build workaround.
It's really satisfying to watch actually. Some youtubers make compilations when a build is finished, which is kinda nice.
I could listen to Al talk all day about why and how he does things. Loving the build so far mate.
Was rad to see this thing at Lakeside last weekend and have a chat to Woody and Al
I just love Al's no BS approach to explaining things. Straight to the point and shows that experience is king in the real world.
He also knows how to build to a requirement \ spec. Some people will try to go over the top, with no real gain in their use case.
Al is such a great friend for helping out his mate with this build! 😁
Great episode gents, it was fun to see Al a bit more keen again, the Torana was definitely taking its toll in the last couple episodes, though I suppose this was filmed before those. Cheers!
Checking the shed when I get home in case a Secretly building a patron's car without his permission video is in the works. 😏
It’s not a milk factory 😂👌🏻 absolutely spot on.
Al you’re the absolute best! Hahaha that was pretty funny when you pulled out that dump pipe with the crazy flange on the end, first thing that went through my head was that looks like a massive pain in the ass to make. I don’t mind the less intensive cataloging of the builds either. Honestly man it’s your channel do what ever format you like and feel comfortable with. Us audience members are just pumped to learn a little bit and laugh.
Spot on about the welding, Al. My dad had a steel fabrication business, making water purification tanks (with many pipes), for skimming contaminated water, 200ft wide beasts. In the 20 years I was hanging out there at the weekends, never once saw anyone purge weld anything. Equally, never once heard of the stalagmites inside until CZcams! Get the prep right, use the right rods, the right amps and the right gas flow, it'll be just fine. Hell, if you're that bothered, put a scope down it when you're done. Now, chatting to a coded welder, that's a whole different ball-game.
Keep at it al and woody ,dont stress too much about things , I think most of us here because weve had an experience with decent bloke like yourself and a garage with random quirky cars . Literally everyone here feels like they're sitting in the corner ears open coz they acknowledge your wisdom . I wish I could make this funny , but that's what it boils down to.
"This is art Woody, ...." , Al you legend!
As a Swede, awesome seeing another Volvo on the Skid Factory!
The industry/ hobby needs more dudes like Yoda. Thanks for these Al and Woody.
That volvo sounded like an absolute bag of shite as you reversed it into the shop. Its going to leave running like a watch. Noice!.
The B230 is a slow dinosaur, but one tough customer. I was a dispatcher at the local Volvo dealer in the 90's and a woman drove in who had hit a brick on the freeway about 20 miles away. It had wrecked the oil pan and instantly drained all the oil. We replaced the pan, filled it up with oil and sent her on her way. I have massive respect for that.
Best episode ever!
"This is art Woody"
as a swede and redblock hoarder i will say they are good. Supports plenty of boost in stock form when done right!
Damn right projects that sit there are no good for anyone.
Speaking of which, two days in bed sulking with my broken arse spine...
Tomorrow I will get up.
Thanks again fellas.
Thanks for the info re the wastegate sizing, I Googled bigger flaps and ended up on a site that was interesting indeed!
Happy birthday Justin enjoy the boost, great thing to do for your friend, legends 🙌
Al at the end was bloody GOLD 😄😄
I remember the Rotara! It was awesome & embarrassed a lot of quick cars back in the day! Awesome work boys!
I'm totally doing this for one my friends one day. Absolutely epic.
i hope to god that rotary suzuki vitara still exsists.
Unfortunately it does not =(
=(
Ah did you own it,?
I always wanted to build a Zook with a rotary, that would have been a beach weapon!
Shame it's gone 😥
There's like a million rotozukis around. It's a really popular swap for some reason.
Hats off to you Al, a truly awesome thing to do for your buddy.
Keen as to see how this one turns out.
Saw this at Lakeside on Sunday, sounds and goes great. Nice work boys and well done on being loyal mates to a mate!!
You guys are bloody legends, what a great thing to do!!! Turbo yoga gives me so much confidence to just do it!!
V8? Easy fit in a 900 series ;) We managed a transverse V10 in one at Cosworth in the 90s as a prototype for Volvo. There's an SAE paper on it somewhere. Sounded like an F1 car. Great fun.
👌Justin's a lucky boy! Should be a sweet cruiser!
awwwww this is a sick plan. What a good present to give your loved one. She's a keeper for getting the Skid Factory on the job!
Love this style of videos guys! Good to see Al a bit more relaxed. Been lookin and sounding a bit under the pump. Really intetested in this flapper mod 👍
Good on Ya, Mate! Projects like this are why any of us have friends for a life time. You just care, and your care shows. Great project, BTW- it's the kind of "street science" of building with what you have that keeps me coming back to the 'Stralian shops- you lot are big on creating your own answers- something the American car scene has lacked for a while, as well as purist welders who wreck the good enough and possible with the perfect. Don't mistake me- I'm a plumber with specialty certifications for medical gas piping and such- where it is absolutely necessary- and somebody else is paying for the materials and extra time it takes to do it that way. The engine doesn't inhale through this pipe, it sends it's smelly, bad breath out this way! And I agree, that down pipe looked dead simple- until you start working up and shaping all the pieces to fit tightly enough to do a finish welding job- great looking piece, Al!
Great one Al. Good to see you back on form and full of info. Enjoyed the format.
What a top conversion. Never purged my SS turbo manifold I made for my AU 4L, and never had a drama. Liking the sped up format......
its mates like you al and the rest of you that every bloke needs!
"Flip em a fitty and get 'em to sit out the front" Got to be the funniest thing Al has ever said so far on SF :) Well done fella's puttin this together for a mate too!
Thanks heaps for the donor red block Vo engine gentlemen....cheap 4 a box of Lemon squashes & it'll end up a surprise package for one of Rick's future turbo'ed incarnations!
Hands down, one of my favorite episodes!!
Definitely like this style of build. No fluff just work getting done. More please. 👌🏼👍🏼👍🏼
"Snakes and spiders will kill you" - what about the dropbears?
Nice work guys, great to see you helping out a mate.
Good stuff 👌
Imagine him saying “ I really wish you had built my other car instead of this one”
who doesn't love AL's wise words of Turbo wisdom!!
Such a great thing to do for a friend . love the videos guy's keep it up!!!
LOL the last bit of the video is brilliant
Love the content and it's great seeing another Volvo in the shed!
You seem much happier in this video Al. Great to see! #NoMoreToranas
Gold as always guys ... like the mixed up format ... keep up the stella content.
i have mad nostalgia for the old Volvo's spent most of my childhood in the back of them 😍
Such a great channel, you two guys are legends! Thanks for all the content! Greets from switzerland
Juzzy is one lucky guy to have good mates like you blokes... I tip my hat 👌👌👌
Thanks for the info on the Chinese Turbo fix/porting! I had no idea that was required. I better rip mine off and get that sorted.
Bloody good thing you're doing, Al. Such a good mate :D
Pretty cool quick build... well quick in the filmed sense. Cool project.
Nice to see some Swedish steel in the work shop.
Al doing the "air plane guidance" in the end brightened up the morning! :D
Love this sort of stuff! Aussie spirit for sure giving back to ya good mates 👌
A fake Al sitting on the roof would scare many things
fake al!!! 🤣 LMAO He said fake OWL 🦉 as in bird that is known to scare other birds 🐦 away
@@andyplage6590 No shit...
Probably alot better than a fake owl. Got one at work cos pigeons where shitting on products at the warehouse and the f*ckers just built a nest behind it.
@@andyplage6590 insert joke flying over head gif here
Love this. Feels like we’re back to the good old skid factory days of Chinese turbos and budget builds.
so cool!! what great friends!!
Though i love the regular in depth builds, it is pretty nice getting to watch so much get done in one episode.
Would be cool to have more of these while you're in between builds like you are now.
On this week's Underhaulin'...😉👍🏻
Fair play for doing this whilst filming that other car that shouldn't be mentioned. Explains why you were even more fed up with it
There’s some front cross member braces from the 960 that are a direct bolts ons. There’s another that goes across from side to side too. Handy bits to stiffen up the front subframe.
Hey awesome! Own a '91 740 with a B230F, put a turbo on it and everything! This is gonna be a fun video!
You are truly a good mate
Finally a real car on this channel! Love the work youre doing keep it up! ❤️
*happy swedish brick noises*
29:11 Supercharged FTW!!!
dude that downpipe looks absolutely incredible. Love it
Ahhhhhh it's the dog panting, I was worried that woody was humping your leg😂🤣😅
Everyone needs mates like these guys.
Amazing gift for a long time friend!
Thanks Al and Woody with your time constraints
So looking forward to this build 👌👌👌 love als humour 👍👍🤣🤣
This is amazing. Well done 👍
lol it sounded like a bag of old nuts and bolts as you reversed it in...superb stuff ..wish i had m8's like you guys.
Love it guys!!
The Aussie "Pimp my Ride"!!! 😊
Easily my favorite show on CZcams, Thanks for the great free content! Sorry I can't support the channel with merch or Patreon.
I remember that hot house green vitara screaming down the nambour highstreet back in 2003/2004. Think it was frequently visiting PRPerformance.
Yeah Chris at PRP built it for Juzzy.
Loved this episode!
I need mates like you guys ;) nice job guys...
This is art Woody, it takes time.
Golden😂🤘🏻
this is awesome! good on you guys!
Good job lads . love your work.
Great episode as always.
The sleeper volvo, is one of my dream builds :D