BMW e39 Transmission Range Switch Fix
Vložit
- čas přidán 24. 04. 2020
- This video shows how to fix the Transmission Failsafe Program Error / Limp mode due to a faulty range switch
Part number 24107507818
Tools needed:
Jack and jack stands
13mm and 10mm socket wrenches
Flat screwdriver
Please like and subscribe! - Auta a dopravní prostředky
Thank you so much, this was really helpful.
Nice video! Have a project car and it was not starting and looking under the car there is a torn wire or two at that switch from something impacting/destroying it at the harness. Time to break out the solder gun and do a bit of wiring work. 2001 740i, no crank, no start and the range selector does not move on the dash, just clicks in the top three positions as you move the shifter from park on down and no clicks from neutral to the lowest gear. New battery and the EWS is aligned properly. Until your video it had me stumped!
I'm having the same issue with my Jaguar XK8 that uses a ZF Gearbox and a similar rotary switch - Thanks for your video
Thanks so much I love my 740il too much to get rid of
G’day Mate, thank you for your time such a Great video to watch 👌directly to the point,,, this is what in my Landy Diso2 on ZF transmission we Call XYZ 😉 ,,, thank you mate cheers 👌👍😎
Thanks mate! XYZ! 🤣.. appreciate you watching!
e53 x5 3.0l is in limp mode. what do i do?
Hi im having a similar problem with my 98 740i , car was running fine then it started forcing itself to pick up . Got home let it cool down drove it around the block & just wouldn’t move at all anymore nun of the gears are doing anything & have the same warnings popping up on my dash could it be smiler problem?
Thank you, I save my self 300$
Nice video.
Thanks
Hey this video is awesome! Question: how is it holding up? Did you have to replace the part after a while? Or does it continue to work? Thanks!
i have a e39 540I and i have the same error but for some reson it goes gear 1 then revs up to 3000 rpm then jumps to 3rd and then 2 gear. im going to change the gearbox oil and filter and hope for the best. if enyone knows how to fix it, please help. And in Tiptronic all the gears works smoth so i don't know what to do.
thanks you
Mine doesn’t always only happen in park it sometimes happens in neutral or revers. You think this is the problem ?
ZF trans or GM trans?
Very intermittent on mine and seems to be at least related to battery condition/state of charge. It always happens when the car has not been used for a few days.
Hello sir ! Great video !
I’ve got a 325i 2002 gear box woorks well , except when i sellect R, then it trows error on dash and get into limp mod ! If i put in P , turn off 5-10 sec start again is fine !
Gearbox changes well , sport mode , manual mode ! Everything fine , sometimes when i put in R has this problem !
Do you believe your fix will sort out my problem ?
Thanks a lot
How about when you start in neutral then go to R or D, does it still go to limp mode? It might very well be this range switch.. but i also suggest to read the error code with a scanner.
whats the music at 3.13😅
i also have same problem with my 97 540i and i will be trying this any helpful tips i need to no before proceeding thanks
Well it's pretty straightforward, just prepare your tools first and just get at it.. i hope this solves your problem.
After you sanded with sandpaper you use dielectric grease or different?
Yes, dielectric grease. Sorry forgot to mention that in the video.
Great video. Do you know what the BMW part number is for the range switch module? Thanks
Sure. The part number is 24107507818.
@@omdcarsandairplanes Thanks!
Great video.
I have a 2002 330i the issue is when i move the shifter to D in the dashboard does not show it and it does not drive neither, i have to hold it to show the D so i can drive. You think that it may be the same sensor. Any suggestions.
Thank you
Yes it could be, but try adjusting where the lever and tip of the cable meet like in 1:25 so that it is pulling on the lever more when you put it on D.
@@omdcarsandairplanes i will try to do that hopefully that fix the issue
I have similar problem with audi a6 c5. It has zf 5hp19 gearbox. Now on colder days it won t go in reverse, then it goes into limp mode and don t put it in gear smoothly
Yes, when it's in limp mode it goes in gear harshly. Have it scanned for codes first.
same issue on my X5 07 It it looks the same from the bottom view I will try thanks
How did the work out for you?
not done yet
I sold it! BMW are great machines but not after 100,000 milles 😂🤣
i just got an e39 523i and my transmission started to go in limb mode when i start the car in park and shift to R and N and as soon as it hits R or N the limb mode comes on. i turn off the car and start in N and put to D and no limb mode. but when i have been drving for awile (from work to home) and as i arrive to my home and put D to N and all the way to P, there is no limb mode.
and when the limb mode comes on the car allways shifts the gear harder than usually, its a harder hitting shift.
the limb mode comes only when i start my car (and let it warm up for a little bit) and when im a about to start driving. only then
so im asking if any one has had this problem and is it because of the range switch?
Does the gear indicator show when you start from P? I would suggest to have it scanned for codes first.
@@omdcarsandairplanes i can see the gears when i start from P and when i put it from R to N the the dashboard loses the PRND12345 and the limb mode comes on.
to add to this, today i took off the sencor but i could not get it open so i just cleaned the outside and put it back on.
after that it did not show it again.
even when i left the second i started the car and did not wait for it to warm up.
i just got strait home and we will see if it comes on again tomorrow when i have time to test it more
but for to day it worked with no problems.
and tomorrow i will get the codes checkd
I can keep this comment going and tell if i find the problem or fix it for anyone else thats having the same kind of promlems
(promblem solved and solution)
we checked the codes and i think it was for the sencor or something like that.
but there has not been any lights or limb mode since we tried to open the sensor and failed.
we just put it back on the car and that seems to has done it.
You won’t know till you drive it,👍
Is it all still working. Mines does not go into Sport mode or Steptronic mode. But all other gears drive perfectly fine and no error codes. Same 530i M54
Yes all is working. Try scanning the transmission computer for error codes.
@@omdcarsandairplanes just awaiting the inpa software. As I think the snapon one is not good enough to read the codes.
But so far I've changed the gear lever and transmission switch but still no luck
Avi Bphotography did you ever fix the transmission?
@@shagbabyyeah yep it was the surround the section which shows PRND that surround as under it is a module with a halogen bulb which acts as a circyit. Got that 2nd hand and all working
@@avibphotography mine doesn t show PRND on the dashboard,after i.changed the engine!
👍🏼🙌🏼🙏🏼🤙🏼
Oh Man aren’t you a fucking life saver!!!! Saved me from killing myself and probably a 500-700$ bill. 😂😂😅 this shit worked like a motherfucking charm my guy!!!
This video could be so much better! He didn’t explain what the situation was? How he figured out to remove that part. Which transmission is in the vehicle!
I’m having problems with my 97 528i not shifting properly, and this video was a complete waste of time! Thanks for nothing!