✔ Tutorial how to BSI reset step by step on Citroen and Peugeot
Vložit
- čas přidán 29. 03. 2018
- BSI Problems and reset procedure.
Don't buy a new BSI (Body Systems Interface or Body Control Unit) for your Citroen or Peugeot until you have read this and tried a factory reset first. Very often the reset will solve a multitude of problems especially the ones that suddenly happened after you fitted a new battery to your car or the ones that just 'appeared' form nowhere!
- Economy mode active?
- Wipers stopped working?
- Central locking gone mad?
- Windows stopped working?
- Indicators and lights doing their own thing?
All of the above can be caused by a nutty BSI and often a reset is all it needs so try this....
Put the driver's window down, lift the bonnet and ensure all equipment is switched off (stereo, lights, wiper, etc)
Ensure all doors are closed and remove key from the ignition.
Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds.
Reconnect the vehicle battery, wait a further 10 seconds (do not open doors).
Switch on the side lights through the driver's window.
Switch on the ignition and check system's functionality.
Hold lock button on key down for 10 seconds.
Remove key open & close door test central locking system.
Start the engine and complete the system's check.
Failure to follow this procedure could result in incorrect operation of many BSI related items.
Tutorial how to BSI reset step by step on Citroen and Peugeot.
Tools needed:
rover.ebay.com/rover/1/710-53...
~-~~-~~~-~~-~
Please watch: "Tutorial How to P0325 Knock sensor replacement"
• How to P0325 Knock sen...
~-~~-~~~-~~-~ - Auta a dopravní prostředky
Amazing .. now at 75 years young I will need to view your video a few more times to get the hang of what to do. excellent video .just the right speed for Old thicko's like me .
Thanks very much 👍
And me👴👍
CONGRATULATIONS!!!!!!!! On my Citroen Xsara VTS the central locking works again. Several technicians, proposed various solutions. The final one was to replace the BSI and the ECU!!!!!!!!!!!!!! Thanks again
👍
A big thank you from me for posting this video, my cruise control wouldn’t work properly on my Citroen dispatch and it was driving me crazy, I followed your instructions and now my cruise control is as good as new … thank you 👍👍
Great, thank you for the positive comment.
A few weeks ago, I asked if the BSI reset might cure my Citroen C3 fuel gauge showing 2 bars and Still 2 after putting in £20 of diesel and then it would count down till zero range. I did the reset and IT WORKED!!! Can't thank you enough. Peter
Great! 👍
Thanks very much!
Peugeot 308 1.6 hdi (2013),had problems with radio, Bluetooth, park sensors and power sterring since my last general inspection.
And this worked like a charm!
Thank you
Great 👍
Your dealership obviously didn't do their job properly.
This also works if you can’t lower your window, you can do it with 2 people. 1 outside who disconnects and connects the battery and 1 inside to do the light, ignition etcetera
You're a legend for posting this, it worked like a charm thank you very much!
Great! 👍
What worked? His car could start?
first class-just saved me a lot off cash-mechanic said big job at least £200-central locking stopped working from key fob but locked when key turned in door--------looked at your video-tried it out------central locking 100% working-thank you for posting
Thank you for watching, and I'm happy that fixed your car.
@@WhatTube hi man my car 508 /2013 petrol The problem Eco mode doesn't start engine only. Otherwise all work. Is this procedure helpful. thank you for all
Chevy you did not need BSI reset, your key fob just got unpaired from the car. The manual mentions this may happen and explains how to pair it. The pair procedure was part of this video - turn the ignition on and hold the lock button on your fob for 10s, which is why it fixed your issue.
This looks more like some dark magic ritual, but worth a try.
Thanks for the video.
I just pulled the shunt fuse for a few seconds and it's fixed. Thanks
Great!
😂😂😂😂
Which fuse?
I've just bought a 2015 Peugeot Boxer and info like this is very helpful knowledge thanks very good clear video... thanks
Peugeot Boxer is a Sevel Fiat product with a magnetti marelli BCM, not the PSA BSI, this procedure will do nothing to it.
Thanks for this worked on mine. Wish my engine looked as clean.
alberto ascari, I'm very happy that worked, thanks.
And my engine is not that clean outside (but inside is very clean, check my other video where I changed the engine oil and you will see how clean was the oil).
Thanks again 👍
@@WhatTube My wipers and lights turn on by themselves will restarting help?
Thanks it worked!!! You saved me a stressfull day
Thank you for watching.
This turn off economy mode?
@@zuikispuikis6039 - "Economy mode" automatically turn off the moment you start the engine. BTW "economy mode" is set to safe guard the battery.
So, it turn off interior lights, radio, etc, etc! Just to mention the most obvious things the driver can see/hear.
Really, can't be simpler than that... ;-)
Worked perfectly. Thanks for the simple fool proof step by step video.
Thank you for the comment.
Would this work on a 2015 2.2 Pg Boxer? I got a discharged battery a couple of times in the last few months and tried unsuccessfully to start the engine. Would this sort of voltage irregularity cause the problem?
Great video. I have a 308 so have to disconnect positive as negative hidden. Should side lights be turned on 1st before reconnecting in this scenario as someone else suggested?
Worked for citroen c3 that had problem with electrical devices on stearing wheel such as indicators lights and odemeter and fuel gauge. Spot on easy fix
Great! 👍
Thank you so much, just got my first car (Peugeot 2008) And then trunk wouldn't open on my second time driving, tried doing the BSI reset as recommended by you and it WORKED, thanked you so much!
Great 👍
My 2012 508 SW doesn't have a factory reset option in the interface, so is this gonna do it? The GPS and radio started malfunctioning for a few years now and it's almost unusable now, so I am unsure if this will help, but I will try. The systems work sometimes, but not consistently, so it has to be some software issue, and a tiny cleanup should do the trick if the problem's trivial.
is this guaranty BSI thing to work or do you have to do it a couple of times, also if the front window is broken by the BSI am I done for.
Thanks. To paraphrase Arthur C Clarke, "Any sufficiently complicated reset procedure is indistinguishable from voodoo. "
Sufficiently? This is braindead. I had a weak battery and now I probably have to pay a 1000 euros to get someone to fix this pos car that cost 2000, just because of a weak battery wth.
Thanks a lot !
This is indeed a realy helpful video ! 💪🙏
Thank you 👍
Hi got a citroen ds4 where the automatic tilting mirrors when reversing have stopped working. Would this help?
Good video... I have a Pug 508 RXH no sound from the infotainment system. Its also a hybrid with ectric motor for the back wheels ... will it correct my sterso system?
Didn't really believe this but i had a fault with my Expert van, one rear indicator had no power getting to it.
Carried out this and now works perfectly,thanks alot !
Your welcome 👍
How did you access your battery inside with all the doors closed? Did you just stay in the van?
Hi, Great video - will do you know if it will work on a 2004 peugeot 206 cc the central locking has gone haywire!
Any news on your question?
I have a 2013 308 1.6hdi active nav i will be changing the battery soon and wondered should i turn sidelights on before or after reconnecting battery or does it matter.
As i have to reconnect positive last negative is covered by battery cover.
Hi, great video. I'm wondering if this would help me though. I have a 2007 Berlingo Multispace that I have had a couple of months now. However, the fuel pump went today and when it arriveBSI reset work for that? Eco Mode also comes up on display.
Hi, you have to replace or fix the fuel pump first, then you can do the BSI reset.
Excellent video ,seems a very unusual way to reprogram fob but worked a treat . Thank you very much for posting.
👍
It's seems to fix a fob you need a car that can start?
325 Comments on a very helpful video. Kinda cringe worthy that ONLY 5 of those reply's are rightfully thanking the poster for his contribution but the other 320 free loaders have treated him like a Free Peugeot Help Line with no mention of the video whatsoever. You people need to stop taking and start giving. The Comment section is where the content consumers can leave their thoughts about the video not bombard the content creator with your car problems when you can't be bothered googling them yourself. Props to the poster as he's gone above and beyond by answering a huge chunk of your personal car problems, no doubt costing him countless hours of his time. People are so self important these days 😡
Josh Brookes thank you very much.
My car has problems can you help! Lol 😂
Hi thanks for the info my c2 has antitheft message everytime I get in car will this procedure work ? Also do you have to disconnect the negative side of the battery ? Because positive side is just a clip
Hi,
Try to use a different car key.
You can try this reset maybe it will fix the issue.
And yes you can disconnect the positive pole of the battery if you want.
Hey got a question does this work for bad fuel level readout on the dashboard
This was 2018, and it's still good!! Got a Peugeot 308 2015 1.2ltr Allure, one day it would not even turn over, much less start, worked out it was the battery, went and changed the battery, and saw BSI on it render the audio screen frozen, non-communicative, after about five seconds. Would mute, no button pressing, nothing, change the screen. Absolutely peed myself, wondering what it was I had to do, on m own. Got onto YT, searched and found this video, it seemed compatible, gave it a go, followed everything, and it worked a treat!! Thumbs up.
👍
Hi my windscreen wipers on my ds5 have stopped working after them being disconnected to replace front struts would this procedure help get them working again, thanks
Good video. Got couple questions a) Can you disconnect the battery at either the positive or negative terminal. My battery negative is hidden well inside the bonnect, can't reach it without taking out the whole battery.
b) do you think this reset might be fix fault that flag up in the system when you initially start it up. I have had Eco activated, Engine needs repair, gearbox fault and parking brake fault all in space of a week when I start car initially
Hi thank you.
a) yes you can disconnect the positive terminal.
b) the Eco mode might get fixed, for the others you need to check for any faults stored in the ecu.
Thanks for the video, very informative. Do you think this will reset the adaptive for the auto transmission? I changed the fluid but had no way to reset the oil counter. Thanks
Hi, for the transmission oil, there isn't any need to reset the interval. There are only few cars that have one, and you can do it only with the diagnostic tool.
Very useful. Used to do this to cure my C5. However, I was told to put the side lights on before reconnecting the battery as they would then absorb any voltage spikes which may be caused if the battery terminal doesn't make a clean contact.
I can see how unclean contact of a battery terminal may lead to voltage dips, but how could it casue voltage spikes?
@@YS_Production as the battery terminal is replaced, the circuits pick up the voltage. If the terminal makes a series of contacts as it slides down the post, the contact will 'make and break' giving dips and spikes which sometimes can be heard as crackles or even seen as sparks. Even if the spikes are less than battery voltage, the processor may be damaged. I was told too that if there is any induction in the cars circuitry, then a falling voltage would produce a back emf which could be larger than battery voltage. I am just going on advice and explanation I was given myself. It always worked for me though!
@@YS_Production.
Sidelight? Blinker, orange light on the side of the car? That is not what he is turning on in the video. He is turning on the original front lights?
Would be nice to know why the BSI unit needed a reset in the first place but very good video all the same
Try to use logic next time. Probably because of malfunction of the BSI...
@@Alonz3 i get
I get that the BSI unit malfunctioned, what i should have said was, what was the fault or problem that caused it to require the reset
Does not matter now, was 2 years ago
I've currently got a fault on my Peugeot 3008 where the BSI has malfunctioned and is causing the battery to drain completely overnight (something isn't being told to power off by the BSI itself). Peugeot want £700 to fix it so I'm going to try a reset of the BSI and see if it fixes the drain. Apparently the BSI can go wrong when you have a battery replacement or even a new key synced to the car!
Thank you sir. Extremely helpful!!!!
👍
Excellent video and information! Will work this in my '00 106 gti?
Thanks!
I think your car doesn't have a BSI but just the immobiliser box, so it will not work for you.
Thanks.
Thank you very much for this video. Followed the steps shown. Am absolutely delighted to find the door locks/unlocks again when I press the remote for my Peugeot 407. Thumbs up and God bless.
Great!
Thank you very much.
Hi, thanks for the video!
On my P5008 (2012, Petrol 1.6THP, Left Hand Drive, 7-seats) I have recently only the following lock/unlock problem and only during winter: while pressing the lock/unlock key button, the car seems to get the signal (because the led [P] on the parking lever turns on) but the locks don't lock/unlock. Everything else works fine and even lock/unlock problems disappear when weather gets warm. So, I assume my lock/unlock problem this is because of cold weather and humidity.
Can you please advise which components or cable connections are prone to humidity or watertightness issues?
Thank you in advance.
Gregory
Hi,
Did you try to replace the battery in the key fob?
@@WhatTube Yes, but with the same results.
Ok, you can start by cleaning the car battery's poles, then clean all the main cables attached to the chassis (negative).
Then remove, check if there is bad connection or corrosion and reinstall all the fuses and reles.
@@WhatTube Ok, I will do.
Besides, I would appreciate much if you could also advise where I should check for any exposed cables or cable connections, regarding cables routing from or to the BSI.
Finally, please let me kindly remind you that the malfunction I have described above happens only when locking/unlocking the car and only during winter.
Thanks again!
Hi Gregory, could you fix it? I have the same problem
Hi, great video! I've got a citeron c4 1.4 2008 and I wanted to ask will this reset work for a ABS light on my dashboard?
I figured if I turn the light off and it comes back then I know there's a problem.
Hi,
No it will not reset the ABS light.
Hi, brilliant video but before I perform what you done, would this fix problems with the ecu? There isn’t really any specific error codes for the ecu it just says that the ecu has a problem as it is cutting my power when the turbo kicks in. My cars a Peugeot 208 GTi 2015
The BSI it's like a second ECU so you can try it and see if it solve the issue.
Thank you for your "how to.." . If the driver door is on the left side, which door and door window will be opened ? the right passenger door or left driver door?
Hi,
The driver side (left in your case)
@@WhatTube wie ist es mit keyless? 😢
Dude, that's my car! 😂 I'm certain of it! It's now got 169k miles and still going
Nice 😄 good to know 👍
Great video. I have a 2007 C4 GP and both rear view mirror electronics don't work including the indicators in the mirror. Going to try this reset to see if it helps
Thanks
did it work?
@@alanlozano6535 Too expensive to repair for me so sold it on.
Hi Thanks for the video Do you know if this would work on mark 1 C5 automatic lights do not come on would it fix that? Thanks
Hi, the best thing is to try and see if it can fix it. 👍
Thanks for video. Problem I have is that the lock button on my key doesn't work (I just lock it manually). Is there any way I can perform the BSI reset without doing the "Hold lock button on key down for 10 seconds." bit? Thanks.
Yes, just skip that point.
@@WhatTube 👍 Thanks, will try that.
@@MrWibble
Hi , did the bsi reset worked for you even you skip the holding key lock button step ?? Because for me its the same case i have no central loking at all neither from the key nor from the lock button
@Wipols Walid Didn't try in the end as someone I work with suggested this - 'Switch lights on & disconnect the battery & leave for a while (I left it for about an hour) to totally discharge the system, then reconnect'. That worked for the problems I was having (no speedo/odometer, random engine management & PS lights & horn operating by itself even when car was locked & I was no where near it!). I guess it's basically the same sort of thing as the BSI reset process in the video. Hope this helps. :)
@@MrWibble
Thanks for the reply ,i understood that you followed the steps as in the video except you skip the holding lock key step , i wanna tell you also that i checked the bsi today ans it seems to be damaged and need to be replaced by another one also reprograming the new one too also get th key pin code from the damnaged bsi , i'll try this method ans escape the key step if it doesnt work i have to change the bsi or put a new lock system
Great video ... my engine cuts when I am driving along ... I get all sorts of alarms come up on the dash .. then the engine completely stops .... I turn the ignition off ... wait 15 seconds, then it’s start back up straight away .. any ideas ??? Would be most great full....
Hi, have you done a diagnostic scan?
Did you solve this. My 308 is doing the same thing
Did you ever solve this. Mine is doing this now. Thanks
@@martinedwardfleet My 207 HDI as started doing this, dangerous. I'm just looking into getting Peugeot planet 2000 and give it a scan
Thanks. I followed this hoping to fix an unexplained rear nearside light cluster failure, which is intermittent. It didn't work, but the key fob seems to be working better now!
👍
I actually then tried removing the connector and cleaned the pin contacts. It’s working fine now 👍🏽.
Had it on mine on both sides with the earth pin, which had overheated on the loom side of the connectors and became corroded as well, replaced them with new connectors and working fine now
Top vid. I have a 2004 c2 will doing this reset the electric steering also?
Hi, doing this procedure you reset everything, but if there's a different issue, for example the electric motor that moves the steering wheel, you have to fix that one.
When need this to do it?
2 years ago on my C4 mk2, when the RAC connected jump leads and removed the red tag on the battery positive to make sure the leads were connected... This action of connecting jump leads and removing the positive caused the fault to sound the alarm everytime the doors were locked with the fob, I had to lock with the secret key to stop it from happening. I tried some of this, door closed, window down switch off disconnect battery. reconnect battery and then press lock button, there is no key ignition only a fob start button, but when I did that the alarm immediately sounded. This method did not work on the new C4. I had Citroen do it they said they uploaded a new BSI software to fix it.
To clarify, removing the battery positive with the engine off, did not cause this fault. The fault only occurred when the RAC had charging cables attached but also at the same time disconnected the battery. I think this is what caused the fault.
It's always better to remove the negative terminal first.
If the battery needs to be charged remove completely the battery and charge it.
This method is working on the C4 as well but in your case the RAC mechanic damaged some components that's why it didn't worked for you.
I was hoping this would reset airbag light on my mk2 c4 grand spacetourer but now I'm not so optimistic
I had this same problem with my 2016 grand picasso, I sat in the car started the engine pressed the mirror button to close the mirrors as if locked , turned engine off and left the car and pressed the key fob and the system had reset not had a problem since .
Citroen c4 2005 1.4 petrol , do u have to do all the steps uve done to start the car?coz it wont start and display says something about bsi
Excellent video. My car won’t start at all so going to try this first as the garage said they can’t fix it. My problem is that the keyfob isn’t working properly so won’t be able to complete the process without the key fob functioning?
Hi, if the garage's person can't fix it then most probably this reset will not work.
The reset will work if only the buttons on the keyfob are not working but if the key itself is not working then the reset will not be completed.
There's another cause of non-start and ECO-MOD display. If you replace the Key Shell, you must also locate the key code chip in the old shell (a little black chip in the corner, easily missed) and move it to the new shell.
Peter D Morrison
That is true, without the transponder chip the car will not start at all. :)
does it need to be re-soldered to the new chip?
No, the transponder chip does not need any connections, it can be easily removed with just the fingers, sometime can be dropped accidentally .
Thanks for the info, I changed the shell of my key today and not a hope would the car start, I didn't even notice the chip, it's starting now after reading this comment, thanks man
some times the chip is part of the door remote control an does not have a separate chip on the mrk3 type c5
@@WhatTube
Hey guys! Im having issues with my pegueot 207 (2008) where the instrument panel/dash lights start flickering, sometimes doesnt turn on (headlights and stuff work fine). Anyone else had this issue and could this method be a possible fix? It usually happens after the car has been parked over a period of time.
Hi, it looks like the issue is the battery itself, next time try to start the engine with the clutch pedal down and all the electrical things off (lights, stereo, ac, ...)
Thanks for all the effort in making and sharing this tutorial. I managed to remove the esp/asr fault today. 2013/2014 Citroen Ds3 1.6 Vti Style.
👍🏻👌🏻🙏👏🏻👏🏻👏🏻👏🏻
Hi, great job 👍
Its come back or not
@@ayol4343 No. Still off. Very pleased
I fix that with a brake light cable, connector pull out from the socket, fix light cable and error solved
Thanks, worked for my P405
Great 👍
How do I know if the bsi is actually reset or not?
Interested
Hi I have a strange problem with my 2007 207 1.4 s .. I park up and walk away from the car with my keys and then maybe 10 minutes later my car wipers are going and heads are on. Open the door and it stops. Any help or advice would be great thanks .
Hi, most probably you have a corroded BSI unit, you can try to remove and clean it with isopropyl alcohol.
Hi there Clair as a Peugeot technician I do know there is also a TSB bsi software download for that very problem. Get someone to check for water ingress first as per the whatube comment.
Hi I have the same kind of problem can you please tell me how you fixed it lplease Thanks Kennny
I've a 2017 C4 1.6HDI. All needed to do, when the car was shut down and off, was disconnect the battery for a second and reconnect. 3 minutes to re-boot and my central locking, and key fob non recognition all sorted.
Is this work on C5 2.0 hdi 2004 restyling? I have problem (service lamp) with lane asyst?
I left the light on in my 2010 berlingo and now it beeps every 15 seconds even when the ignition is off. Everything still works. It's just so annoying. Any ideas?
Hi,
Do you have the navigation system whit the display?
If yes I think is that one.
Hi
Does this method removes messages
From the computer: for example depollution system faulty.
I replaced EGR and the error stayed. Peugeot 307 lift 1.6 hdi 90km
No it doesn't
I have the same damn fault with my 2008 308 1.6 petrol its running like a bag of shit and the engine management light is on then when driving flashes and goes into limp mode
Hi... on my 2014 Berlingo Diesel, my cruise control/ speed limiter isn't working properly. Cruise control isn't to come into the display anymore and it always in limited mode.. I can adjust the limit up and down, and activate it. But any other changes, the speed dissappears to - - double lines. After I restart the car, the display is on 30 kmh.
The knobs and buttons seem to all work.
Would a BSI reset fix this?
Hi and thank you for this tutorial but can you give us the reset procedure for 508 from 2012 with keyless ignition ? Thank you a lot !
Krystofer Savarin
Hi, thanks for watching the video.
The procedure should be same, for turning the ignition ON you have to press the START/STOP button once but release it quickly.
All the other procedure should be same like the video.
If you have more questions let me know.
Thanks.
Same way, same car
What is the reason to reset BSI?
Without going into too many details. Consider this the equivalent off resetting your PC... In fact it's exactly the same! ;-)
Thanks for watching and for all the LIKES.
Important: Please DO NOT disconnect the battery while the engine is running, follow the steps one by one.
Thank you very much!
Excellent video. Please continue to post more videos.
I have a question regarding disconnection of the battery for post 2016 Peugeot 308.
According to the manual, it says before disconnecting the battery, the doors and windows should be closed and wait 2 minutes before disconnecting the battery.
I guess this is to put the BSI to sleep. However, I have seen many instructions including this video to leave the windows open so that the side lights can be turned on. So I am not sure if the newer models BSI are detecting the state of windows open or closed position. Any thoughts? Thanks.
P.S. The peugeot 308 manual for 2016 model can be found online.
L Emech thanks,
You need to open only the drivers window, if you don't leave it open before disconnecting the battery you can't reset the BSI and you can have various electric problems.
Even the older BSI can detect the windows but if you wait few minutes the BSI enter in "sleep mode" then you can disconnect the battery.
I hope that is helpful.
If you have more questions let me know.
Thanks.
Thank you for your kind response. I guess what I am not clear with is:
1. What is the difference with closing the doors and windows and after connecting the battery, wait 3 minutes then open the door to reset the BSI versus, leave the windows open and turn on the lights to reset BSI. I thought as long as the door is open after connecting battery, the BSI will reset. Or should a higher current draw be needed, then open the door followed by turning on side lights.
2. Is it necessary to always do a BSI reset after disconnecting the old battery and replacing it with a new battery? Or, the BSI reset is carried out only on a need to basis like there are problems with BSI.
Thanks again.
L Emech
1. If you close the doors and windows then reconnect the battery and wait 3 minutes, then you open the door, in this case you are waking up the BSI by multiple functions (doors lock/unlock, door light, interior light, dashboard operation, ...)
If you open the windows and after reconnecting the battery you switch on the light, you are turning on the BSI with only one function, so th BSI can't be "confused" by multiple operations.
2. Is better to do it every time the battery is changed but is not essential.
WhatTube Excellent! It’s all clear now. Thank you very much.
Hi my citroen grand c4 picasso 2015 automatic gearbox start/stop key.. Alarm goes off when pressed locked on my key.
Hi there ! I have a C5 x7 2008 and the wipers work whenever they feel like it ! Any thoughts!? I saw your video replacing the motors ! Could it be something else apart from the motors? Thank you
Hi, check the fuses and the wires, but most probably it's the motor itself.
Oh man the driverseat is on the wrong side :)
Pimp Dumbel
Hi, I live in UK and here all cars are like this :)
Walk to the otherside !
It is on the right side
side lights through the driver's window
John Timbs kindly tell me how to deactivate red stop light in peugeot expert 2017
Hi thanks for the vid, I have two questions:
1 ) Does this clear the learned adaptions of the ECU? I.e. can I use this to reset the adaptions after installing a new VVT and chain , without the need for a diagnostic tool ?
2 ) does this clear fault codes ?
Many thanks
Hi
1) yes, this method will clear some of the adaptions learned but not all of them.
If you replace just the timing chain usually there is no need to reset but for the VVT you need to use a diagnostic tool.
2) This method does not clear fault codes, in some cases the light may not show on the dashboard but the fault is still stored in the ecu.
@@WhatTube thank you!
I changed the radio of my xsara Picasso 2005 1.6 hdi and lost function on screen. This procedure restored all screen info. Thank you so much for this.
Great 👍
Faaaaantastick!!! Thank You thank You, good man!! Two days I was looking for problem, couse I could not start my Partner '06 2.0hdi, and after this reset it's ALIVE again!!
May the force be with You!!! 😂 TY for this video!!
You're welcome.
Happy to help 👍
What issues did you have regading this? My 807 peeps endless while kl15/ignition key on...
jeg har byttet ecu kit på min peugeot 3008 ,2010 mod som jeg har kjøpt fra england. Siden den er høyrestyrt vil jeg ha problem med at dørlås vil ikke fungere fordi den mener at jeg har en engelsk bsi uansett om jeg har programert at den er venstre styrt. Er det noen som kan hjelpe meg?
Hi. Do you know if this would reset the hydractive suspension on a C5? The rear of the car is lower than the front even after replacing the rear shocks. Thanks!
I don't think it will help
There's a sensor that makes the rear height at the rear near the center ball.
You saved me! Thank you so much!!
👍
Buenas, sabes si serviría para este problema
de la berlingo?
El velocímetro a veces funciona y otras no,
cuando no está funcionando , cuando quiere se
pone bien el velocímetro y el motor tira más,
y también a la inversa. Esta bien y cuando
quiere se pone en 0 el motor tira mucho menos .
Gracias
It sounds like a problem with the engine, not the speedometer?
Hola, el problema que tiene mi Citroen C4 es que al estar sin contacto a los dos minutos enciende el limpiaparabrizas y las luces. Pregunto puedo hacer reset con el limpiaparabrizas y luces encendidas ? ya que no llega a los tres minutos.
Great. Thanks a lot.
Thanks for the video tutorial.
Hopefully it will solve the problem of my ac blower.
Will this help my Peugeot 407 ,as the wipers are not working ?
Thanx very much . It worked perfectly
Great! 👍
I have citroen c4 picasso 2015 auto parking light on change the caliphar but still no luck I think might need to programme it
Thanks for the video ... was wondering if this helps with a Peugeot 307 1.4HDi (2005) sometimes it does not start. Most of the times I disconnect the battery, connect again and starts OK. Yesterday was the only time I could not start my 307 :( .... tried again this afternoon and started first try !!
Hi, try to clean the battery terminals and the cables as well and clean the negative cable to the chassis side.
Check corrosion on fuse F8
hi what tube. nice video. i want to reset my 108 as i want the car to learn my style of driving and not the previous owners. (im getting rubbish MPG) would this work on a 2017 peugeot 108. and does it indeed reset all previous driving habits. thank you
Yes it will reset it.
But if you get bad mpg it can be some other issue.
@@WhatTube what other issues for pegeout 108 could low mpg be what tube ? thanks
Heyo! Not yet tested this as I am charging the battery atm, was wondering if there was other things than this to try out to get my alternator working again other than taking it out (Its a Berlingo 2011 1.6 HDI Diesel engine, utter pain to get to it) Want to explore all other options before I gotta get in hard and dirty :P Barely use it as I mostly just use my job car. Got other issues aswell so hoping its just the bsi being bratty. If ya got any ideas to try out I'd really appriciate it! ^_^
Hi, if the alternator doesn't recharge the battery it can be the alternator clutch pulley as well.
Check all the fuses and relays, and all the wires on the system.
Check if the bsi is corroded or faulty ( if it is, then normally you have more than one thing not working or working inappropriatly)
Hi, nice video. A have a question. I recently tried to place an aftermarket radio with the right leads. It worked fine, but I found out that the parking signals weren't pass through to the radio. So I removed it and placed the standart RD4 radio back. After that i had no warning signals (key in ignition, lights still on, etc) and the parking signals weren't working anymore. You think I could fix it with resetting the BSI?
Hi, are you talking about the parking sensors?
@@WhatTube The sound from the parking sensors when you ride in reverse. You normally would hear beeping when you get to close to an object. I hear only one beep when I put the car in reverse. After that nothing.
@@r3stl3ssobl1v1on Yes it can be fixed whit the BSI reset, if not try to remove all 4 sensor cables from the ECU and then reconnect one by one and check the voltage of the wires coming to the ECU.
@@WhatTube Ok, thanks for the response. Highly appreciated! Do You know where I can find more info on the BSI? I'm curious what it controls and what not.
@@r3stl3ssobl1v1on Google is your best friend 😊
Hi, I've discovered a parasitic drain on my battery in my 2016 Citroen Relay, I've narrowed it down to one fuse, but that fuse is responsible for various functions that I might not be able to investigate further. I'm thinking of doing a reset to see if that helps, do you think this might help? and are there any risks to resetting?
Hi, it's best to try to reset it, and there are no side effect.
Hi I have a 2008 307cc 2.0l hdi engine used to cut out intermittently but restart then sometime ago it cut out for good & wont restart. It Had the injectors checked, fuel pump & lots of other things checked too but all appear fine. I’ve been told it’s probably the ecu but on this particular model (Delphi) it can’t be checked. Do you think the bsi just needs resetting?
Hi, I don't think it's a BSI issue, but you can try to reset it.
Hello I like the video. Will it work for me?
I have a 307 cc.
Yesterday while operating the roof, I had an aig bag message which clear it self few seconds later.
Driving then for 10 minutes when all dash boards lights shows then to leave only the warning orange one.
I check the error code with aodb2 : u0028 and u0055.
Shall I use your reset approach? Or it is something more serious?
Also notice that time to time the radio reset itself !
Thx
Hi, you can try this method and see, but I think is something else.
@@WhatTube Thanks. The engine warning light went away, but the 2 errors are still showing up (even after resetting them)
Hi thanks for thıs vıdeo. My car has many problem. First the car wiper works by itself. Then the car esp fault warning and parking brake fault and There are many warning like this. What can ı do for this issues? Could u help me pls
Fantastico! Funziona! Spia resettata. Berlingo 1.4 purethc 2018.
Wonderful! It works! Thanks a lot.
Thank you for the comment.
Hi I have a Peugeot bipper 2014 ,1.3hdi. I disconnected the battery whilst I wired in tow bar.once connected 3 days later at night the abs and warning light exclamation is lit very very dimly.
Hi. Wipers on a 407 sometimes do a swipe when i unlock or open a car door. I'm also noticing that sometimes all 4 doors do not lock when i press the button on my car key. Just the boot and the fuel cap locks only. Could this be a sign of a faulty bsi or a reset will do it? Thanks
Hi, if all the issue started at the same time then it should be the BSI, most of the time a reset will fix it.
If this doesn't fix the issue try to open the bonnet, wait at least 3 minutes, remove the battery negative terminal then remove all the fuses an relay and check for corrosion on the terminals.
Thanks for the video. Do you know if this method will work at a Peugeot 206 cc 2.0 GTI (2003)? I have a beep alarm of roof when driving but roof opening and closing is working fine.
Yes this should work on you car.
@@WhatTube thank you very much. Do you think this reset will act to reset roof system? The beep I have is for a false alarm of roof (it's working fine) but constant beeping when I drive more than 5 mph.
I think the roof is not closed properly.
Try the BSI reset first, then open completely the roof, wait 1 minute then close it completely and see if is fixed.
If is still the same, there is one relay in the boot near the pump for folding the roof, press manually to close it.
If is still the same you need the Lexia software to do it.
@@WhatTube Thank you very much again. I'll try as you said, I'll post results.
@@WhatTube unfortunately no look with this. But I'm not sure if BSI have been reset... Is there any way to check if BSI reset has been done correctly?
Thanks for your effort, is this procedures is useful for appears S* on car dashboard
Hi, if it's an automatic car then it can be the "sport" or "snow" mode, there should be a button to activate or deactivate this function.