Winton WFL105 EFGC105 Heavy Duty Flail Mower Farm Tech Review
Vložit
- čas přidán 17. 05. 2024
- Winton WFL105 Heavy Duty Flail Mower Farm Tech Review. Bought over winter and put to test in the summer. Lets see how this goes connected to a Kubota ZB1400 aka B1400 compact tractor. Zebedee cuts a field!
This is not an instructional video and is intended as entertainment purposes only. Always get professional advice before tackling any DIY project. DO NOT DO THIS YOURSELF. You have been warned. - Jak na to + styl
Awesome video! Very helpful as I’m buying one of these soon! Thanks!
No problem, Farmtech were really good who i bought it from. Lovely bit of kit and once adjusted correctly for your tractor/land it's great.👍
Have a Winton flail I use with a Yanmar 16 bhp tractor.Great tool,though tractor with a bit more power,would be ideal.
Great video thank you ! Could I ask a favour - would the larger cat 2 ends fit in the brackets if it was sleeved down? I’m not sure if the brackets are wide enough to take the larger balls.
Sorry i dont know the answer to that, but get in touch with Farm Tech they should be able to answer.
Magic video I am just about to use the same mower with a compat tractor, havn't thought of lowering roller, is that a problem? Thanks for video.
Lowering the roller gives a higher cut and for me meant less clogging up and bogging down as i'm borderline on the tractor HP. I left the skids where they were and didnt get any scalping which was good. Have a look at the the flail mower on the back of the tractor on flat land it should look level, if not adjust the top link. 👍👍
Do you find front weights would help with a flail on? I bought 3x 20kg for my iseki not sure how much I need!
@@alexfowler1986 I haven't bought any yet, main problem is lifting the flail up the steering goes as the front wheels come off the ground. Not sure if there is a calc to do ie half the flail weight and that's the tractor weights you need? You have the same flail? The 105 is listed as 180kg from memory.
I think they say online put 35/40% of weight on the front kinda makes sense!
Good to see how someone else is getting on with a winton mower. I have a winton 1.45m side shift mower and have played around with height settings as I found on our land the skids would often dig into the ground when turning. your approach with the roller down is what I have done and works best…i have still found on soft ground the roller side mounts can mark the ground. The Wessex products I have looked have a much larger diameter roller which I think a distinct advantage. 👍🏻
Could hear you better,if you turned off tractor!
WHAT? I CAN'T HEAR YOU!!!!!