Voltera V-One PCB printing
Vložit
- čas přidán 7. 09. 2024
- This video show my Voltera V-One PCB printing a prototype of a GPS module I designed. I actually find it quite mesmerizing watching the PCB come to life. Also, I didn't put music in the video so you can enjoy the sound of the stepper motors of the V-One.
www.voltera.io/
The GPS module is powered by an ATmega328P (Overkill for this application, I know, but I have a couple of them laying around), and uses a SIMComm SIM868 for GPS and GPRS. To save space on the PCB I am using an eSIM instead of a SIM card holder.
The SIM868 module is normally powered down, and the ATMEGA328 in deep sleep. At regular intervals it wakes up, powers up the SIM868 module, gets the current location, sends it to a cloud service, and gets to sleep again.
The "problematic" pad it prints at the start is actually a problem with the EAGLE PCB software, it cannot create real polygons and fakes it with loads of short lines instead. Not exactly optimal for the techniques used in the V-One! Go figure.
machine sound is better then any background music
Thank you for showing the video in real time, not time lapsed. It's easy enough for us to jump the video or watch in fast forward, but being able to see how long it actually takes is very useful.
Especially with background music. Which isn't required on it. IMO
What a Nice Scanner Or Kana A Led Printer For The PCB (Printed Circuit Board) is used to mechanically support and electrically connect electronic components using conductive pathways, tracks or signal traces etched from copper sheets laminated onto a non-conductive board. Components are connected through the conductive material below a non conductive board, the common conductive material used in packaged PCBs are usually copper, since copper is cheap and common. We Love It. Thank you Very Much.
Uma das coisas que eu mais admiro na tecnologia moderna são essas máquinas e essas placas com todos esses circuitos, desde criança sempre ficava admirado olhando e pensando nas pessoas que haviam criado essas coisas, é realmente de ficar fascinado com a inteligência humana e a esse ponto em que chegou. Vida longa aos engenheiros que estudaram e todos os outros do passado que se dedicaram até que hoje tenhamos tudo isso. Deus abençoe a todos.
I love people who don't put useless music in their videos.
Thanks. (-:
Currect
Same. Thanks for kool sound.
Me too ...
ST
Wow, I never knew that these circuit boards are made this way. Excellent invention of its time.
They aren't made this way. Half an hour would be way too much time to produce just one PCB. Usually this "pattern" is applied by using some kind of stencil.
They aren't. This is for prototyping inhouse. Circuit boards are made using full sheet of copper laid onto an insulating sheet (such as fiberglass). A photoresist plastic layer is applied on top of the copper, and lasers are used to determine what should and shouldn't be masked. The photoresist is developed, leaving exposed copper on the places you don't actually want the copper.
Then the exposed copper is dissolved (called 'etched') using a chemical bath. Holes are drilled, plated, etc. If the board is multiple layers this is done for each layer and compressed together.
Isso é o máximo!!
Uma previsão escomunal, sou recém formado técnico em automação e gosto muito disso.
Parabéns aos criadores dessa máquina e aos programadores.
Amazing
Pelo visto a tinta já deve ser condutora pois a placa virgem não tem cobre. Mas é lento para produção em larga escala.
Didnt realize there was consumer grade stuff like this. I work for a multi billion dollar technology company in the electronics assembly department. I service printing, surfacemounting, through hole mounting, reflow, wave and selective solder equipment as well as a lot of the peripherals that support it. Pretty cool to see a desktop mini version.
is that machine is operated manually or it is automated ?
A good solution to keep those little sticky trails from dragging off the tip would be to have the printing head do a few tiny circles around the point it picks up from. Glass blowers do exactly that for the same reason, and the same principle works for most any viscous fluid.
Watching this was mesmerizing, haha
Why bother? Just use a Steadler marker, they don't have that problem. This looks like some kind of 'paint' pen.
Oh, thank you for not putting music in the video, it is so good to hear the machine.
Newfution
Que tecnologia 😻😻😻lindo demais 😍 uma obra prima
Essa máquina faz numa delicadeza que imprecina.
Muito top😍
The guards of all things will patent the sound of the engine and deprive us of this sweet music.
Love the sound of the steppers working
Yes
Thanks for the video. We never get to see such things while studying.
Great art. How fine work done so perfectly.
MI
really it`s great to have this type of productive machines, it`s human revolution.
Cada linha dessa é um circuito,junto com os componentes eletrônicos. Legal tecnologia.
Its very highfunny.. Very technically and well designed.. I 😍 it
Muito top,esta inteligência de uma invenção de tecnologia de capacitância sem erros né...
Spent 10 minute thinking about what im going to do with my life got distracted for 20+ minute watching this vod. Damn you!
توكيل
اوكي
The engineer and robot perfect picture and sound like music remix is amazing appreciated for this video and keep going up❤️
మానవుని యొక్క అద్భుత సృష్టి... 🙏🙏🙏🙏🙏🙏👍👍👍❤️❤️❤️❤️❤️
What would the world be without Engineering mentality?
It's so relaxing to see this 😊
Olha a precisão dessa máquina! Por isso que esses produtos são bem valorizados!
love the sound, love the video. watching at 2x speed
2x speed
A tecnologia e estudo acima de tudo.
Most important thing in every device and machinery
Amazing machine.....
OK
When it made the robotic sound... I felt that.
I'm so interested in these kind of technology
that sound... EARGASM!!
most satisfying video. nice kirk sound of stepper motor.
Kn subio esto. Porfa ke suban otro este es el mejor videos ke esperaba lo vi todo completito y me gusto mucho. Suban otro como este .
Jerónimo Moreno Jiménez 3j3u0
Gusto ko ito panoorin ng paulit ulit
... absolutely exact - the dream of constructeurs Like me - comes true.
Fantastic machine. Very nice.
This is cool. I came here because I had a dream about circuit printers, and was a little sad someone had already made a home production model. Maybe I'm not out of luck for coming up with my own yet, though, as the ink looks to have really slopped up the fine details.
You could come up with one that drills the holes as well. It's kinda hard to drill holes when they are close.
+Jonny Bergdahl m
I know it has been a year but there is a module to do the drills to !
Hey bro, want to know you.
I love the sound
"Also, I didn't put music in the video so you can enjoy the sound of the stepper motors of the V-One."
Oh thanks xD
Could you please give us a bit more info about what the green material underneath is, what filament you were using and if there is a place like thingiverse for PCBs? :) Thank you very much in advance!
Suricat B. It's not a regular 3D printer. I think the pcb material is something proprietary from that company. It's also not using filament (conductive filament exists, but it's crap, I tried it) it's using a special paste, which flows and cures at room temperature. And lastly, there is no thingiverse for pcb's, i simply design them in Autodesk eagle and then use some freeware or fusion 360 to cam it.
Hope I answered your questions.
thats right its a special past homogenized with hot surface then cures .
The "green material" is FR4, the same stuff that ordinary PCB's are made of. The "filament" is conductive silver ink, not plastic.
www.seeedstudio.com/blog/2017/09/20/fr4-pcb-material/
Nokia 2
Login techno mobile loging
Great art. Highley appreciable.
After watch greatscott's video, somehow this video appear in my recommendation video.
Machines are greatest invention
Most satisfying video
I'm studing electronic engineering in the best university in sudan but i see the europian people do strangest things like this printer device as there was came from mars 😂😂😂
Hi
What he make🌹
I love machines sound..nice printing..
👊 powerful awesome stuff . Love it , much appreciated ☺
This machine lets me remembered the age of plotter, it has 8 pens and draws only one line at a time, it took hours to draw a complicated drawing. It then was replaced by a big printer. will it happen in this area?
Yeah, I remember those old pen plotters. I don't think there will be a PCB printer much bigger than the V-One though. It's main purpose is to print fast prototype boards, so printing big doesn't apply.
Fantastic video fantastic machine... thanks..
Very good idea tecnology
Yours is one of the only videos of it working that's produced independently. Thanks for this.
Would the end result be improved if the flow of the silver ink were reduced? Is that an option? The Voltera produced videos showcase perfect flow rate with no extra buildup whereas there seems to be some "overextrusion" (as it would be called on an FDM printer) in your video. Cheers.
The camera magnification makes the result look more bumpy than it really is. But yes, you can control to flow rate, even during printing.
czcams.com/video/CEUwLHgJf0Q/video.html
Excellent video. Good Job.
Background music is nice
Ovo je dobro za povledat , korisno sve Ok.
Saludos amigo de acá de Santiago Chile
Woooooooooow i love this precise machine
Really satisfying
This would also be great for flexible PCBs as well.
They do sell a special flexible ink for that.
Jonny Bergdahl
It is amazing what is available now for the home hobbyist.
Cool, very soothing....cheers.
Wow very awesome matchine
Best fantastic technology
However they’re deciding which order to draw the traces in it could use some optimisation. The head goes all over the place.
I believe, maybe for temp purposes
@@johnmoney910 It's not heated when it's being layed down.
Now I can build my own smartphone!
*Amazing video* thanks for watching 🌹🌹💚💚💚💚💚🌹🌹🌹🌹💚💚💚🌹🌹🌹🌹💚💚💚💚
thanks for uploading this video I didn't know how they print this
thanku mai is video ko dekh kar mai banane ka kosish karunga.
At first I thought it was engraving, but in retrospect it's laying down conductive plastic? Where did you find that? Do you have a link?
www.voltera.io/
More Rigid-Flex PCB advantages and disadvantages go with www.raypcb.com/production-flow-of-flex-rigid-pcb-and-its-advantages-disadvantages/
Brilliant machine, very similar to a rotary engraving machine, what I need to know is what is deposited on a board, is it molten substance and is it copper or tin and how does it stick to board, does it stick to board because it is molten.
It's silver ink.
Is that the silver ink that is about 2 ohms per inch of trace? Have you actually built a circuit using this process and if so, have you built an RF circuit using the process? Maybe you could put a link here to a video of a circuit that you built using this process and showing it working with some verbal description of the project.
Informative Video. Thanks for upload
wonderful big shouts to you @Uganda
Circuit board looks very neat and perfect. But to make one board it takes so much time, that is the only concern.
Is veri Good..👍👍👍
Set speed 2X
Sit back & enjoy😉😉
this needs 10x speed on youtube
That is what the slider is for.
kinda afraid to skip smth important ))) but yeah, that wil do
that machine need velocity
Useful video thank you ...
Hi
Will the solder paste work on the glass substrate ? Any idea?
The ink is printable on glass, yes.
Nice work guys
Incrivelmente genial!!!!!
Motor sound really gooood
You never playing in fast so l leal joying you video bra🙏🙏😎😎
conductive silver ink? Does it have much resistance? any drawbacks?
The drawback is that the ink don't hold up for the temperature of normal solder, you need to use a low temperature solder.
As for the resistance I see no problems, on the other hand I only design digital circuits.
Voltera has posted this video - czcams.com/video/L06gAmW3fOs/video.html
PCP printing machine how mani price were,are biring
Noob question. How is a working pcb? What a router should do is remove the space between traces and leave traces intact. What I see here is trace being routed throud the green film. If etched is this will rest in a negative circuit. I must be missing something
It is not routing, it is printing with silver ink on a blank PCB.
Now you need a machine to populate the board !
It looks like the ink is "oozing" almost all the time. So how low can you actually go in detail e.g. spacing traces, pin pitch etc.?
The oozing is not a big problem, and you can make ot ooze less by decreasing the flow.
Voltera states a pin to pin pitch of 32 mil, 08 mm. There is an experimental nozzle capable of a smaller pitch however.
Eu acho esse barulhinho da máquina bonito. :-D
Hi
Imagine the person who designed the board
Imagine the one who created the man whom you told about ....
@@itsmenizumol his mum? Why?
what material is using in the printing? Gold or brass ?
It is a silver based ink.
Amazing fill...
video bahut achhe laga mujhe
ممكن اعرف كيف العمل بالاله لان عندي ولاكن طريقت التشغير تصعب عليه وشكرآ
محمد الدفاعي الدفاعي
السلام وعليكم اخوي والله فطول دي حق ايش هي ده ؟؟ يعمل ايش هوه
منوعات فراكش اخي الغالي الأله تعمل غرائط اجهزه كهربائيه تحكم بالكميوتر
محمد الدفاعي الدفاعي
توبي فهما الله يوفقك ياغالي لي الإمام وبتوفيق
منوعات فراكش شكرآ اخي الغالي
@@user-zz8nq6bw7u من اين لك بالاله هل خمطته
Good service
Video wonderful
wonderful wonderful
creativity with success and success
Gostei,mas toda essa demora pra fazer uma plaqueta?! Acho que vale mais apena para fazer trabalhos caseiros se bem que no processo químico sai bem mais barato.
اس مشین کو انسانی داماغ نے بنایا
اور انسانی داماغ کو اللہ نے بنایا
بس سب تعریفیں اللہ ہی کے لیے ہیں
nice, but not practical ... and there is a short ... the gound-area with the thick track entering it :D
Thomas Pmaxuw but to good
Fixing is a short is possible before the cure ... but also designing for machine capabilities is important.This is an ambitious layout IMO.
Hdvjdu
As you can see from this video, there are no shorts. Even though this board was not designed to be printed by this machine.
czcams.com/video/CEUwLHgJf0Q/video.html
Thomas Pmaxuw also I don't think that ic will flow properly unless that board gets a good leveling.
Why does the injection nozzle backtrack a few mm at the end of each trace?
To avoid a blob of ink at the end point.
That machine is really incredible. How do i get my pcbs printed this way?
Dialed in! Nice.
Hi Scott
Como eu vim parar aqui?? E ainda assisti tudo
Kkkkkkk pois é. Digo a mesma coisa.
🤣
Quarentena, é a resposta
@@prof.cassiano yane
@@mahamadouabdouabdou1121 Yane? Não entendi.