PCB making, PCB prototyping quickly and easy - STEP by STEP
Vložit
- čas přidán 12. 10. 2018
- Quick project to show how to easily create your custom PCB at home with help of CNC Wegstr.
- CNC Wegstr machine wegstr.com
- mills for PCB goo.gl/Zrhmfs
- set for PCB wegstr.com/set-for-PCB
- Facebook page goo.gl/pac5bI
Skladba The Life and Death of a Certain
název interpreta Chris Zabriskie
podléhá licenci creativecommons.org/licenses/...
Zdroj: chriszabriskie.com/vendaface/
Umělec: chriszabriskie.com/ - Věda a technologie
Back in 2000 as an electronics hobbyist at that time i was designing on paper and making myself the PCBs for fun, electronic door bell, small radios, cable TV amplifiers, etc using nail paint and nitric acid, and as for drilling, i was making the drills manually with a small device. Took me hours to complete something but every time in the end I was so happy that i did another working PCB without any mistakes.
kudos to you mate !!! but today it is about monetizing your projects taking on the big guns in this tough economic times
Cris33311 Прямо с языка сорвал .
Один в один!
Азотную кислоту не применял.
Хлорное железо, само собой потом:
Перекись водорода+ слабенький р-р HCl
_или медный купорос с солью.
Получалось просто зашибись.
Самое "тяжёлое"- нарисовать красиво, без " соплей"и пропусков.
И лаки, у жены украденные, и всевозможные нитрокраски- всё испробовал..
...давно это было...
А лучшего человечество и не придумало...
Кроме как травить....
Step 1: Own a CNC machine
Exactly what I was going to say
@@Pdrum2 of
It's very easy to short circuit (while soldering) because of small gap between conducted part and "no conducted". Maybe soldering is performed by another CNC ?
Step ZERO
@@sawomirsiwek7558 so you just don't know how to solder?
I really appreciate you sharing this. It was enjoyable to watch and I got insight on one of my own projects. Thank you!
Wow, felt so satisfying watching it mill.. great!
You guys are awesome! I am sure there are people in the galaxy who can afford $3000 PCB machine at home, to play around. Good luck!
I was in some kind of hypnotic trance watching this. very cool
Toll! Werde 'die Tage' wohl erneut mein Glück mit Sprint-Layout versuchen - besten Dank für diese 'How to' Anleitung.
That is a really clean cut!!!
This has to make it into one of those most satisfying video collections on youtube
Да, всё круто! но как то в детстве, ремонтируя мопед, брат вырезал небольшую прокладку из паронита прямо из центра огромного листа. Отец увидев это, отвесил несильный упрек, и сказал, что экономить материал нужно всегда, не известно, когда он может пригодиться, и будет ли возможность его купить.
This is really precise work,i love the cnc work..great! :D
Wow .... Thank you for the tutorial, it was very useful for me
Thank God and You, something sane to watch.
Just a joy to watch 😀
Excellent video and music reminiscent of Kraftwerk, Excellent !
Muito bom
So satisfying to watch. Wish I had one of those machines. Hand etching a circuit layout takes longer.
You can use a presensitized pcb and with some test about uv timing u can have very good results
I had successfully made a double sided pcb at home for a flight controller with clearence 0.1mm between traces and pads and all its components is smd.
U still need to heat the etching acid so use boiled water and u will be ok
I even covered it with a uv solder mask and make a screen printing for the components using a silk screen with white color uv solder mask
@@MrfB-br6yh Thanks for that info! I'll look into that for the next time I make something. I bet it looks really nice and neat and professional. Thanks again🙏
@@SSGSativa welcome any time every time
Great video. Thanks
El nombre correcto sería , después de 1 año de práctica los PCB en 11 min con la herramienta y conocimientos adecuados , excelente video , me encantó lo profesional , felicidades
Reparacion de centralitas
Tu puedes hacer ese tipo de trabajo?
Necesito hacer algunos projectos
Donde tu vives?
I like it a lot, even the website looks fantastic
Whoever chooses the music for these videos needs a raise.
Satisfying to watch
Nice vid. Gives me hope with my CNC mill. Created board using EasyEDA but not all Gerber files created so a little more work to do. Also building a reflow oven using WalMart toaster oven, an Rocket Scream reflow oven controller+thermocouple and a Solid State Relay. Trial run of oven good.
Krásná práce!
With the music it was mesmerising
i can watch forever that machine drawing board texture
Thanks for the tutorial! I tested the example on a CNC3018 PRO. There are some adjustments to make but it works well :) 👍 👍👍.
Hello I have a 3018 pro and every thing it's ok for pcb engraving no problem whith the copper you can cut that with the mill tools delivered with the machine ...
omg. iT IS SO BEAUTIFUL!
I think that this is what I’m looking for
ЧПУ конечно крутой, но вот вырезать маленькую платку из середины листа, это трындец!
Oddly hypnotic TFS, G :)
wow the vacuum system work very good
Guys, this is SUPER EXPENSIVE. Search on youtube for "The ANT PCB Maker". An open source PCB CNC machine.
Quick and easy, if you can spend $10K for the machine.
As everything on youtube and DIY things... "(¬ . ¬)"
you're looking in the wrong places then. Carbide 3D has a machine called Nomad for only 2800
Very satisfactory vídeo !
This is a wonderful job
The system is good but too expensive for student use.
When I was a kid all we had was a PDP-10 and some ferrous chloride.
awesome machine, I like it!
Excellent very useful for my project
Great video, thanks a lot.
The PCB is fixed by two supports only, no autoleveling used and traces milled look just perfect.
Did you use spring loaded bit here? Or is the bed mounted on springs?
So easy when you have a cnc at home haha
That's what I was going to say, it's a piece of cake to make PCBs with the 'right tools', aka 'expensive tools'
Check Root CNC project
U can use just permanent marker and FeCl3, ugly, but cheap and it work
Так цей станок не дорого коштує, чому ти смієшся? Я живу в Україні, маю маленьку зарплатню і то можу собі дозволити купити такий станок
Total flipping on this process. Before was you ink out the connections. Drop in acid and dissolve all the metal off the board. Now no mess and no acid messing around. Absolute brilliant.
Amazing Content! Many Thanks!!!
Máš to pěkně udělané. Podle toho videa to vypadá že bych to zvládl i já.
You are smart dude
Very good for prototypes.
Amazing.Very,very cool 👍
What about a few videos on the machine itself and the software. How do you get other PCB package designs into the CNC?
I have a desktop CNC machine that will route PCBs (with trace widths down to 8 mils), but it'll also cut parts out of aluminum.
Hi 👋 , I also have the same😅, let's connect? OddlyIncredible
Nice and clean
Very nice the fps view. Congrats!
Fantastic camera arrangement...
Assuming that the soldering of the components will be done by people (and not by a robot) the possibility of this process end up resulting in some short circuit point(s) is too great!! You should have programmed the router to remove a larger area of copper around the tracks!
Keep it up, nice video clip, thank you for sharing the information :)
It's a machine of my dreams ❤️
I wonder why he cut the design from the middle ( think about it)
Very good ❤️☺️
Wish I had one of those machines
Perfecto, buen video, gracias
Longana
Tu puedes hacer ese tipo de trabajo?
Donde tu vives?
Wonderful
Why placed it in the middle now you have to throw away a lot of the plate?
Wow
That was beautiful
Es ist so schön !
The tools are very expencive
I don't know what is making but the music sounds nice.
Great ! I DO MAKE IT TO SUN DAY
Wow Exillent work
Ok this is speed run pcb making
very easy to get short circuit board
2023... great video and good looking PCB 👍🏻 thanks for sharing with us 🫡
Amazing content👈👍
Great. Let's see it do traces for a 128-pin QFN IC
With the right bits and low enough lateral cutting speeds, it works. Honestly, at that kind of spacing, soldering issues and bridging are more of a problem than the cutout of the traces.
Beautiful and totally mesmerising but..... bridging seems more than just possible.
J S not impossible. Wire on non-copper side or 0ohm resistor
@@Electheo hey no..
He said about unintended bridging
Designing and cut is satisfactory
thank you
from Morocco
Forgot that it's an add, was wondering about the perfection for a moment.
Please make on video how to make the machine
Wow very good
beautiful job
Very nice, but you need to reduce the price of your machines. That is the only thing that puts me off buying or recommending one!
Nice machine. Not going to spend that kind of money though.
Nossa que perfeição, parabéns, você ensina a usar esse programa da cnc para usar em pcb? e como usa-lo com uma caneta para pintar a pcb nas trilhas?
Wow what a perfection, congratulations, do you teach to use that cnc program to use in pcb? and how do you use it with a pen to paint the pcb on the tracks?
Wow...ty for sharing
Which software' tool can you use
Use a 100pin TQFP next time at least, if you want to show off with the machine.
ok no problem :)
PERFECTO 👍🏻
beautiful video
Muy buena maquina, lastima que sea tan cara. Like.
El Mago
Tu puedes hacer ese tipo de trabajo?
Donde tu vives?
How to build a car:
Step 1: Own a car manufacturing plant.
Good job!
It's cool but I not have money To buy it
Impressive. Unfortunately is still too expensive for hobbyists. Maybe in a couple more years
What would be the right price for such machine for hobbyists? How much would you be willing to pay for it considering that it could save you weeks in waiting times for a high quality pcb?
You can make pcb wihout cnc
@@isusek1234 you can but is a lot harder than using a cnc. And old what the guy above is saying that it expensive, you can fine cheap ones online for $100-200 that can do the fine copper work
@@merunasgЗа эти недели ожидания вы получите набор из нескольких досок, которые просверлены, покрыты припоем и закрашены маской. И здесь вам еще предстоит это сделать. Но для прототипов полезно, если у вас богатый папа, или вы получили грант на создание прекрасного видео на CZcams.
И прежде чем заказывать доски на заводе, вы делаете прототип на макете.
so satisfying
excelente!
Nice video thanks but how is someone suppose to get their hands on these kinda stuff in the 1st place which makes it not easy.
But I did learn how PCB are made now, ty!👍
Edit: Btw the music makes it seem you are making T-1000?! lol
Get $50,000, easy
@@eksine Lmao I wish it was easy. I do have some ACB & crypto stocks/coins so maybe one day I will be able to buy it if I get rich.
@@solonepeon5805 oh just found out the machine FYI this machine costs 3,617.9 € with tax ($4,000 US dollars) and shipping worldwide is 179 EUR, wegstr.com/CNC-Wegstr-(English)
wegstr.com/CNC-Wegstr-(English) About $4000 for one.
@@eksine Nah, around $4000.
Buenos días desde México, como se llama la primera broca que usaste para las pistas
Benjamin
Tu puedes hacer ese tipo de trabajo?
Necesito hacer algunos projectos
Donde tu vives?
Good Job.👍👍
idk why but it's so relaxing xD
I want this machine :/
@@emreaka3965 give me the money and i will ship my unit to your mothers house
@@fumetsux9021 salak işte ya veledin tekidir kesin
@@fumetsux9021 İngilizce karsilik yazmıştım sildiler Türkçe yazdım
Why does this have 2m views
Did youtube recommend it to everyone