How to Replace Front Lower Ball Joints 1997-2006 Jeep Wrangler

Buy Now!
New Ball Joint from 1AAuto.com 1aau.to/ib/1ASBJ00082
This video shows you how to install new front lower ball joints from TRQ on your 1997-2006 Jeep Wrangler. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This process should be similar on the following vehicles:
1997 Jeep Wrangler
1998 Jeep Wrangler
1999 Jeep Wrangler
2000 Jeep Wrangler
2001 Jeep Wrangler
2002 Jeep Wrangler
2003 Jeep Wrangler
2004 Jeep Wrangler
2005 Jeep Wrangler
2006 Jeep Wrangler
Tools you will need:
• Pry Bar 1aau.to/oYg/1AXAA00020
• 22mm Wrench
• 12mm Socket 1aau.to/obGC/1AXAA00015
• 14mm Socket 1aau.to/obGC/1AXAA00015
• 17mm Socket 1aau.to/obGC/1AXAA00015
• 19mm Socket 1aau.to/oaoQ/1AXAA00043
• 22mm Socket 1aau.to/opJ/1AXAA00266
• 32mm Socket 1aau.to/odb/1AAST00003
• 36mm Socket 1aau.to/ocj/1AAST00006
• Ball Joint Press
• Brake Caliper Hanger 1aau.to/ojP/1AXAA00439
• Side Cutters
• 5/16 Inch Socket
• Ratchet 1aau.to/obJP/1AXAA00016
• Socket Extensions 1aau.to/obGC/1AXAA00015
• Torque Wrench 1aau.to/oaPe/1AXAA00044
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oFq/1AXSS00035
• Gloves 1aau.to/oaqv/1AXSS00048
• Safety Glasses
• Sandpaper
• Floor Jack 1aau.to/oado/1AXAA00068
• Hammer
• Jack Stands 1aau.to/oZW/1AXAA00065
• Punch
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@ludwig-vi6pi]

Great video thanks for sharing 👊🏼

[@ynamaxa]

Wave washer doesn’t go under axle nut. It’s after and pushing again collar with pin.

[@bandedclovishomestead]

32 mm didnt work for me on bottom ?? how is that possible