2023 Nissan Frontier Offroad Gorilla Diff Breather Kit Installation *DIY Mod*
Vložit
- čas přidán 6. 01. 2024
- Here is a detailed installation of the rear differential breather kit from Offroad Gorilla on my 2023 Nissan Frontier Pro-4x. This kit comes with everything you need for installation and fits perfectly on the 2022+ frontiers. #nissan #frontier #nissanfrontier #frontiermods
LIST OF WHAT'S ON THE FRONTIER SO FAR:
Offroad Gorilla Diff Breather Kit: www.offroadgorilla.com/shop/r...
Dobinsons IMS Lift:dobinsonusa.com/products/dobi...
Factor 55 Flatlink E: www.factor55.com/p-flatlink-e...
Baja Designs S8 LED Light Bar: www.bajadesigns.com/products/...
Warn VR Evo 10S Winch: www.warn.com/vr-evo-10-s-103253
CBI Offroad Covert Bumper: cbioffroadfab.com/product/nis...
CBI Offroad Bull Bar: cbioffroadfab.com/product/nis...
Auxbeam AR-600 RGB Switch Panel: www.auxbeam.com/CAC1/AR600
AVS In Channel Vent Visors: rb.gy/3ixcd
Bison Tonneau Cover: rb.gy/fja7g
Iron Bison Side Steps/Running Boards: rb.gy/xbt2o
LED Foglight Amber Vinyl (Bought Off Etsy): rb.gy/41hec
Grille Vinyl Inlays (Bought Off Etsy): rb.gy/wpmnw
3D Tailgate Decals (Bought Off Etsy): tinyurl.com/y982ksn7
DISCOUNT CODES/LINKS TO THE BEST PRODUCTS:
15% Off Auxbeam: Use Code CAC1
www.auxbeam.com/CAC1/AR600
Avalon King Products Sold Here: avalonking.com/canadiancruisin
For 15% off LED Lights Use code: CanadianCruisin
www.auxito.com/OiVI-PsrP_BH - Auta a dopravní prostředky
Just installed the same kit on my 22 Pro4x. Thanks for the walkthrough, was extremely helpful.
Glad it helped
Thanks for the great video - have the kit on my bench in the garage. Looks easy enough with my limited mechanical skills - expect thee hardest part will be crawling under the truck and reaching things :)
Laying on the ground is the hardest part for sure haha
@@CanadianCruisin Indeed. Thank you for the video - made the process super easy.
I installed the same kit on my 2020 frontier with the Dana axle. I went with the gorilla kit as well. Over a year and holding up well.
I have the same kit on the way for my 2nd gen. Gorilla off road suggests putting a small amount of rvt sealant on the threads of the barbed fitting in the axle housing.
Good to know. At least one of us reads instructions haha
Does this kit void any type of factory warranties by chance to your knowledge?
I purchased this kit for my 2023 Pro 4X. I assumed I had a breather on my rear axle. Upon inspection, I discovered there is only a plug there. I guess I’m going to leave it alone since that’s the way the factory designed it, not sure what their plan is for overheating in the axle. Any thoughts out there would be appreciated.
If the axle has the plug left in it you or your dealer need to remove it immediately. The tech never installed the breather at the factory. If you leave the axle plugged it WILL build up enough pressure to blow the axle seals out eventually. Basically your rear axle is a pipe bomb if it's plugged with no breather. I highly recommend you inspect the area between the hubb and the axle end for fluid/wetness as well, or fluid on the inside of your tire. If you see any of the 3 your rear axle seal is already leaking. Speaking from experience. I had a Titan before I got my 2023 Pro4X and the rear axle failed for this very reason. If you're still in warranty I would notify your dealership and make them do it.
Is ZAP STRAP what you call zip ties in Canada?
Yeah haha. We have a brand called zap straps here. Kinda like kleenex
Thanks for the video.
You should really spray the underside with Fluid Film. ✌🏻
Do you have to do anything for the front differential?
I havent looked personally but I heard they route the front breather up higher from factory so nothing is needed for the front.
Should I upgrade it if I don't off road?
I would. It will slowly plug up over time even with normal driving.
I have a 22 Pro 4x that I bought 2 weeks ago with only 6,000 miles on it. Checked the breather after watching this and sure enough it was locked closed. I freed it up, but will be putting one of these on now