How To Install Front LED Pod Turn Signals on 2024 Kawasaki KLX 300 by TST Industries
Vložit
- čas přidán 12. 11. 2023
- Upgrade your 2024 Kawasaki KLX 300 front turn signals to bright LED units from TST Industries. Choose between the sleek and low-profile BL6 design, the modern ARO18 design, or our retro Echo design. All of which provide excellent light output and improved design over stock lights. Purchase these with our Kawasaki wire harness converters for a simple plug-and-play installation that won't require any cutting, splicing, or soldering!
Make sure to subscribe here: bit.ly/1jq2ZrN
Follow us on Facebook here: on. 1nuTjlF
Follow us on Instagram here: / tstindustries
Follow us on Twitter here: / tstindustries
Ditch the big and bulbous stock signals that come stock on your KLX 300 and upgrade to a bright LED solution that not only adds brighter lights but improves looks as well. Our wire harness converters ensure a plug and play installation, getting you back out on the road sooner and not left in the garage splicing wires. - Auta a dopravní prostředky
I have found that you can put a zip tie to keep the turn signal in place
Can you mount the BL6 design turn signals to the oem rear turn signals with out tail tidy?
I am assuming that you mean in place of OE signals on stock fender. When the OE signals come out, they may leave behind a hole larger than the BL6 can mount to. I do not know for sure because I have not taken OE signals off the fender. If you check that, and it turns out that they do leave a larger hole, then you will need an additional mount kit, like this one: tstindustries.com/tst-pod-turn-signal-adapter-plate-kit.html . I believe the Plate Kit 3 in that product page is the closest for your application.
Okay that makes sense, would the rear turn signals be plug and play like the front turn signals. Thank you for answering my questions!
@@user-dg5ky6pe8o if you get the signals coupled with the Kawi spec sub harnesses then they will be plug and play. This is the right harness for your bike: tstindustries.com/tst-kawasaki-signal-plug-converters-2-to-2.html
@@user-dg5ky6pe8ohow did it work out ? Did you need to buy the extra kit ? I am looking to do the same thing