7:35 Installation Process Paul Ricalde shares secrets to replacing a pre hung door. Easy to follow instructions that will have you installing doors like a PRO!
Great video Paul. Very helpful. Getting ready to make a 12x12 shed , your videos been great. You helped me out big time making my lap joint fence gate. Still going strong 4 years later.
Very helpful. The quick demonstration on trimming drywall with the multi-tool saved me a lot of time. Running the screws behind the weather stripping was a real pro touch.
Thanks, Paul! I'm in the process of replacing my door with concrete bottom. You gave a great explanation of it and all-around for the door replacement. Thanks.
I have watched so many videos on exterior door installations. They have all been great videos, but your video is next level. You have a real gift at explaining every step. Things I was unclear on have been made crystal clear. You have saved me so much money. Thank you, I truly appreciate this video.
Thanks Paul! We had a big box store door installed 20+ years ago and it was never done right. We live in Texas and the clay soil plays havoc on foundations. We had that fixed about 5 years ago and I’ve been nursing this door ever since. Time for a new prehung front door for me this Spring! I built a few kitchens, but very little framing carpentry. I feel like I can now tackle this job right.
This is by far the best vid I've seen on a pre-hung door install. Lots of great common sense (that isn't so common) methods here. Really dig the channel!
Nice video. I use electricians tape over the ends of caulk tubes. I put two pieces at 90 degrees to each other. I have had caulk keep for 2 years and still be good. A few years ago Mike Holmes hosted a show of handyman competition. He had guys hand double doors using used different sized doors in jams that were out of square and out of plumb. I think that would be a great video because some of us live in old homes that have settled and shifted through the years. I always enjoy your videos. Keep up the good work!!!!
Hi Paul, I really learn a lot from you. As my home is being remodeled, I am able to watch things closely and have them re-do what I do not feel was done properly. Thanks for these tips and I, especially like the Poly Flash around the doors. I am going to request that to the builder. Happy Holiday!!!!
I'm glad I found your page. I like your explanations and you show were you are installing your hardware. Beginners can follow your instructions with ease.
Lots of great installation tips and love the Dynaflex product. I installed a new front door with sidelights, where I had to increase the opening. I ende3d removing the brick and adding a cement wooden siding which made it easier. I did notice some water damage around the rain spouts.
Great video it's the little tricks I always love. Sitting at the FD kitchen table and said look at this! Great idea. Also just bought that nail gun and love it.
like your video a lot. Nothing like the Lowe's video that really doesn't give you a real picture of what goes on when changing out a door. You explain everything thoroughly good bad and how to handle it. Thank you
Very informative video Paul, I wish I had you to hang my the back door on my house 15 years ago, what a crappie job that guy did! New Subscriber. Awesome videos!
My Son just received a quote to supply and install two rear exterior doors for $7,000 Now that I've watched your video, l will help my Son install the doors and his cost to me will be a cup of coffee
Very good video, Call home repair person myself. Although I’ve just started getting into doing all kinds of doors. Over the years I’ve helped people doing but I’ve never felt like tackling them on my own but the last five years I’ve been doing them. In this video I wish I would’ve seen my very first time I tackled the door because I think it would’ve took out all the guesswork and all the problems that I had to figure out on my own. Great job man mad respect from one carpenter to another
I also liked the measuring tip... forever I have been trying to figure out how to measure accurately when butted against a side, and the tape bends over and becomes difficult to be precise...... now I know.... just measure to a common center scribe from each side...
Just ripped a door out the other day! But I'm opening up the frame to put a sliding glass door in. Once the wife is happy it's back to building your shed! Love your videos Paul.
Thank you for this video! My existing door doesn't have interior trim nor do I have drywall so that simplifies things a bit. There was wood paneling but it broke and is all crumbled away. I have old ugly wood on the outside. My exterior trim is much wider though. I will probably have to sand it, repaint it, and put it back up. Might have to rip it down if my new door comes with exterior brickmold. I'm going to have to put in a proper header on my door-- it has a flat 2x4 for a load-bearing wall. Fun times. It's also crooked and is 1" lower on one side than the other. Bonus points, there's electrical wire running through the cripples. One trick I've found with removing doors is that you can pop the hinge pins up and out and then slide the door with off with hinges still on both the jamb and the door. Makes it easier to take the jamb out. I took hinge pins out to paint my door while it was on a table. I also needed to install a pet door. I wish my floor was level. It's actually rotted and the sill is rotted too. It will be sooo much fun fixing that up. LOL. I like how you did the flashing with the upper corners first. When we helped my friend put his front door in we didn't plumb up the hinge side first. But we got the frame plumb on each side-- but floor isn't level-- so the door ended up sagging and having huge reveal on the top and hitting the threshold at the bottom. We thought the top was level from all our checking. Not sure what went wrong-- but it's a 100 yr old house. In retrospect, I wish we'd put the knob on to make sure it would catch properly before finalizing the shimming. Also would have used nails with smaller heads on the outside trim. I suppose we can try to square it up better now, but part of the threshold was broken off. No concrete slab at my house. All wood & up on pillars. Makes patching a bit easier. Man, I wish I'd known the weather stripping came out. I was taping it off to avoid painting it when I was painting the frame. I could have just pulled it out of the way and put it back in! Back before I knew more about DIY I used regular Great Stuff around my door & it warped the frame so the door doesn't stay closed properly anymore. I have to brace things against it. While door got destroyed anyway after a few hurricanes though. Do you have a link to the DAP flashing tape? Having something that peels only one one part first would greatly help me since I am a total monkey and get things stuck to themselves and to me.
I have installed many doors and this guy is the real deal. Explains things well and doesn’t assume everything is perfect.
Great video Paul. Very helpful. Getting ready to make a 12x12 shed , your videos been great. You helped me out big time making my lap joint fence gate. Still going strong 4 years later.
Very helpful. The quick demonstration on trimming drywall with the multi-tool saved me a lot of time. Running the screws behind the weather stripping was a real pro touch.
Thanks, Paul! I'm in the process of replacing my door with concrete bottom. You gave a great explanation of it and all-around for the door replacement. Thanks.
Thanks Paul, another great video helping us to see what is in our "wheel house" and giving us courage to try.
I really like the idea about the wire nuts I never thought of that thank you very much and fantastic job.
Good morning Rockie, Thank you for taking the time to comment. I really appreciate you watching! Have a great weekend!
Same here, great idea!
@@GetCart3rCA Thank you Carter!! Have a great day!
I have watched so many videos on exterior door installations. They have all been great videos, but your video is next level. You have a real gift at explaining every step. Things I was unclear on have been made crystal clear. You have saved me so much money. Thank you, I truly appreciate this video.
Thanks Paul! We had a big box store door installed 20+ years ago and it was never done right. We live in Texas and the clay soil plays havoc on foundations. We had that fixed about 5 years ago and I’ve been nursing this door ever since. Time for a new prehung front door for me this Spring! I built a few kitchens, but very little framing carpentry. I feel like I can now tackle this job right.
This is by far the best vid I've seen on a pre-hung door install. Lots of great common sense (that isn't so common) methods here. Really dig the channel!
Agreed
Your videos are always well made and very clear. I definitely will try to replace a door by myself now. Thanks for the video.
Very good video. I’ve used wire nuts on caulk tubes also. They’re a great fit on most tubes. Appreciate all the videos and information you’re sharing.
Thank you Paul of helping me with repairing Exteror door frame and facial wood trine to pvc framing
You just took all the guess work out of this job. Another great video to save in my Home Improvement file. Thank you! Elsie is so cute!!!
Nice video. I use electricians tape over the ends of caulk tubes. I put two pieces at 90 degrees to each other. I have had caulk keep for 2 years and still be good. A few years ago Mike Holmes hosted a show of handyman competition. He had guys hand double doors using used different sized doors in jams that were out of square and out of plumb. I think that would be a great video because some of us live in old homes that have settled and shifted through the years. I always enjoy your videos. Keep up the good work!!!!
Hi Paul, I really learn a lot from you. As my home is being remodeled, I am able to watch things closely and have them re-do what I do not feel was done properly. Thanks for these tips and I, especially like the Poly Flash around the doors. I am going to request that to the builder. Happy Holiday!!!!
Awesome video! I'm getting ready to replace my garage door just like this one. Lots of tips and tricks other videos don't mention.
I'm sitting at the firehouse watching your videos and figuring out what projects I'm going to tackle when I get home. Thanks for the motivation!
Great stuff Paulie! That's doing it right. Cheers!
Excellent video with good tips. Like your pup.
You took the time to really explain it from start to finish that was great thanks a lot
You always make it look so easy. Thanks again for another informative video.
Excellent stuff Paul. I wish the frame hadn't been quite so perfect so we could see how to fix more problems, but you explained well. Thank you!
great video. like the way you tightened the shims. also good idea about the flashing. thanks for sharing!
Another great DIY video. Thank you!
Excellent tips, great explanations and video showing all the details👊 Would love to see you install an exterior door that’s as easy as this one was😉🙏
I'm glad I found your page. I like your explanations and you show were you are installing your hardware. Beginners can follow your instructions with ease.
Great tip on caulking tip using wire nuts. I've always use an 2 in wood screw for that.
Lots of great installation tips and love the Dynaflex product. I installed a new front door with sidelights, where I had to increase the opening. I ende3d removing the brick and adding a cement wooden siding which made it easier. I did notice some water damage around the rain spouts.
Thank you, getting ready to install a french door and wanted to make sure I had the right idea!
great info Paul with the different products
Tons of nuggets of little tips there. Thanks!
Smarter every day. Thanks Paul
Just stumbled across your page, your content is awesome man!!! Thank you
Good stuff Paul!!....learning a lot from you! Thanks!
Awesome video! Learnt new things and ideas. Thanks Paul.
Thanks again for the info. Never heard of get a grip. Going to have to check it out.
Instructions are very well explained. Great job !!
Great video it's the little tricks I always love. Sitting at the FD kitchen table and said look at this! Great idea. Also just bought that nail gun and love it.
Great job Paul
like your video a lot. Nothing like the Lowe's video that really doesn't give you a real picture of what goes on when changing out a door. You explain everything thoroughly good bad and how to handle it. Thank you
You produce very detailed videos. Keep up the good work.
Great video Paul! I love your channel thanks for all the uploads
Nice job Mr Ricalde, I full joy this video. Thanks for sharing.
Once the warm weather arrives this is my next project. Have 2 exterior doors leaning against the wall waiting for spring to be installed.
Very informative video Paul, I wish I had you to hang my the back door on my house 15 years ago, what a crappie job that guy did!
New Subscriber. Awesome videos!
My house was built in 1981 so I watch alot of DIY videos. This video was impressive so I subscribed immediately.
I have been using the blue wire nuts for a few years. The large blue ones are perfect and you get a very good seal.
I really like your channel Paul. Very practical and usable information. And I’m also a retired career Firefighter. Stay safe brother.
Really liked your video. Definitely very informative. Really appreciate it. Keep up the great work
My Son just received a quote to supply and install two rear exterior doors for $7,000
Now that I've watched your video, l will help my Son install the doors and his cost to me will be a cup of coffee
Great work! 🫡
Thank you for making and posting this video.
Many good tips. Great job!!!
great video, paul!
well done. I like the screws behind the weather strip.
This was all really helpful. Love the personal tips. I will use them.
Very good video, Call home repair person myself. Although I’ve just started getting into doing all kinds of doors. Over the years I’ve helped people doing but I’ve never felt like tackling them on my own but the last five years I’ve been doing them. In this video I wish I would’ve seen my very first time I tackled the door because I think it would’ve took out all the guesswork and all the problems that I had to figure out on my own. Great job man mad respect from one carpenter to another
Thank you Home Repair I really appreciate that! Have a good night!
I also liked the measuring tip... forever I have been trying to figure out how to measure accurately when butted against a side, and the tape bends over and becomes difficult to be precise...... now I know.... just measure to a common center scribe from each side...
Just ripped a door out the other day! But I'm opening up the frame to put a sliding glass door in. Once the wife is happy it's back to building your shed! Love your videos Paul.
Timeless knowledge. Great. Thank you...
nice clean install
Really helpful. Especially the tip for shimming
I thank you for not babbling. Most you you tube videos I have watched the guys babble on about stuff that you explain simply and understandably .
Great series
You do a realistic video, not one to make it look like a child could do it! Real pro!
Very well explained!!!
Another good video as usual. Keep up the good work. 👍
Thanks Paul, wish I had this video before changing out a door for my sister-in-law . Contractor left a lot of mess.
Love the wire cap on the caulking
Thanks for video. Gonna give your tips a try.
Thanks for tips, installed an exterior door no problem, great videos,
great little tips here and there thanks!
Thank you for this video!
My existing door doesn't have interior trim nor do I have drywall so that simplifies things a bit. There was wood paneling but it broke and is all crumbled away. I have old ugly wood on the outside. My exterior trim is much wider though. I will probably have to sand it, repaint it, and put it back up. Might have to rip it down if my new door comes with exterior brickmold.
I'm going to have to put in a proper header on my door-- it has a flat 2x4 for a load-bearing wall. Fun times. It's also crooked and is 1" lower on one side than the other. Bonus points, there's electrical wire running through the cripples.
One trick I've found with removing doors is that you can pop the hinge pins up and out and then slide the door with off with hinges still on both the jamb and the door. Makes it easier to take the jamb out. I took hinge pins out to paint my door while it was on a table. I also needed to install a pet door.
I wish my floor was level. It's actually rotted and the sill is rotted too. It will be sooo much fun fixing that up. LOL.
I like how you did the flashing with the upper corners first.
When we helped my friend put his front door in we didn't plumb up the hinge side first. But we got the frame plumb on each side-- but floor isn't level-- so the door ended up sagging and having huge reveal on the top and hitting the threshold at the bottom. We thought the top was level from all our checking. Not sure what went wrong-- but it's a 100 yr old house. In retrospect, I wish we'd put the knob on to make sure it would catch properly before finalizing the shimming. Also would have used nails with smaller heads on the outside trim. I suppose we can try to square it up better now, but part of the threshold was broken off.
No concrete slab at my house. All wood & up on pillars. Makes patching a bit easier.
Man, I wish I'd known the weather stripping came out. I was taping it off to avoid painting it when I was painting the frame. I could have just pulled it out of the way and put it back in!
Back before I knew more about DIY I used regular Great Stuff around my door & it warped the frame so the door doesn't stay closed properly anymore. I have to brace things against it. While door got destroyed anyway after a few hurricanes though.
Do you have a link to the DAP flashing tape? Having something that peels only one one part first would greatly help me since I am a total monkey and get things stuck to themselves and to me.
Great job!
Like all the tips you gave
Great job brother.
Great tips, thanks!
Great job on the video!
Man, great video as usual!
Love your work 👍💪😎🔨
Grate job bro. I needed that.👍🏼
Great video as always.
Thanks Paul!
Great video. I liked the time outs.
Great tips. Thanks.
You rock Paul!
Nicely done
Wish you were my next door neighbor brother. I'd get a ton of stuff done. Keep those videos coming. Thanks!
Good video as always! Thanks Paul
Lots of good info. Thank you
Nice Job Paul!
Joe, I am trying to get in touch with you buddy please go to my website www.paul’stoolbox.com and leave me a note. Happy Thanksgiving buddy!
Nice Paul good job and thanks for the tips
Great video. Thanks
I like the idea with the wire nuts to cap off caulk tubes!
Thank you Paul
Another good tip, thanks👍🏼👊🏼
Nice looking job
great advise with the wire nut!!!
Great idea wire nuts to seal caulk tubes! Beats Saran wrap and tape
great info and great tips in this tutorial thank you!! : D