WLToys XK A160 Skylark Flying Model Piper Cub Flight Test Review
Vložit
- čas přidán 12. 06. 2024
- WLToys XK A160 Skylark Flying Model Piper Cub Flight Test Review
This is a very good looking 4 channel flying RC model of the Piper Cub. It includes a 6G stabilzation system to help ease flying. Find it here bit.ly/XK-A160
Pros
- Looks fantastic. Nicely done flying model of a 1946 Piper J-3 Cub.
- Very quiet (almost silent) in flight while under power.
- Constructed of EPP foam with plastic trim. Weighs 145 grams, and thus does not require registration in most countries.
- Includes 6G (6DoF) stabilization (3 axis gyroscopic, and 3 axis accelerometer) to provide smooth flights for beginner pilots. The stabilization can be quickly turned off and on with the press of a button, allowing acrobatic flight if desired. If you get into trouble, just turn stabilization back on to allow it to automatically level itself.
- 1406 brushless motor for power and durability.
- 4 channel control with power, ailerons, elevator, and rudder control.
- 7.4V 500mah provides about 6 minutes of flighttime per charge.
Cons
- Plastic trim components are susceptible to damage in a crash.
- Not ready to fly, requires assembly. Assembly instructions were incomplete. Requires some basic RC knowledge or experience to fill in the blanks during assembly.
- Prone to stalls and unrecoverable spins with the 6G stabilization system on. Stalls/spins occurred even when carefully flying it through gentle turns while paying attention to keep the speed up.
Affiliate links: At no cost to you, I do receive a small commission for sales resulting from these links.
This video along with every video of the Quadcopter 101 channel was produced and edited with VSDC Free Video Editor. You may download this excellent, and no kidding "free" video editor here www.videosoftdev.com/free-vide...
MUSIC LICENSE
"Awel" by stefsax
ccmixter.org/files/stefsax/7785
is licensed under a Creative Commons license:
creativecommons.org/licenses/b...
music was shortened to fit length of video. - Věda a technologie
As an experienced model cub pilot of 1/3 , 1/4, & 1/5 scales - one thing I have learned is that wind changes the cub into a flying squirrel 🐿️ now add a tail heavy CG and you have a plane that will become an aerobatic happy to snap and spin plane! Get the CG (center of Gravity) to balance just slightly nose wards and go with low rates on the throws of the controls and they will be very easy and control able to fly! Note: you may need to add a few grams of nose weight forward to get that CG correct! Happy Landings! 😊
Who would leave a thumbs down on this amazing content!??
I was wondering when you would release the video for this one... it was definitely worth the wait!!!!🤩🤩🤩
Got some great news for owners of this plane. I positioned the aerial instead of going towards the back of the plane to the front of the plane so it goes under the cockpit. It flies really good now with no glitches. Would be interesting if others have the same success.
How is it working now? Interested in buying this cub.
@@bigriceburner AS above shove grey aerial wire to front of fuselage rather than back. Also sticky taped am 8gram coin inside nose cone to get the right centre of gravity. Was to tail heavy. Shove battery as far forward as possible. Now it flies perfect, loops etc. I went from hating it to loving it.
@@adrianstirn1255 thanks man! This may be my second plane.. always had a love for Cubs.
What do you mean aerial? What part is that? Mine flies terrible.
@@adrianstirn1255 Just bought this plane, watching the video it does look tail heavy in flight, notice the porpoising. Will add some nose weight myself and see about moving the aerial as suggested.
Nice honest review of a nice little plane, subscribed.
Just ordered one. Thanks for the review I know what I’m up against. I have a big grassy park to fly it so no worries
Great videos, thank you! I noticed the JST connector between battery and plane is lose and keeps disconnecting intermittently and does also cause a stall. I replaced the connectors on both ends and never had disconnect again. Still can stall on turns and will try the the tips pointed out in the comment.
Your videos are always 🔥❤️
I still have the XK A600 Beaver that you reviewed and featured several times some years ago now, that was a beaut' little plane :) The only starter plane that I enjoyed more was the HobbyZone Sport Cub S so easy to fly but limited to light winds.
I loved my sport cub S to death. It needs every single part replaced, which I think may be more expensive than just buying another. I could fly it in quite strong winds, but it didn't make any progress forward. Surprisingly acrobatic too, I'd love a brushless version with FPV.
@@liefjorgen "brushless version with FPV" Yep, I'd get one.
I had the exact same problem, my friend and I moved the servo connection to the middle, setting on the flaps problem solved, happy, flying excellent video. Thank you very much.
Knew sometime was coming up as seen on the receiver board of the xk models
I have had the best experience with the piper cube it's got some good details and if Flys so smoothly I recommend getting this for a starter
Quadcopter 101, what the receiver board for the a160 work in a scratch built airplane with the stabilization turned off or would they Chinese equivalent of as3x cause problems with a different airframe? George
There are some people saying its a bit tail heavy. I just got mine so I will double check the balance.
Great video wish I'd seen it before I bought mine. Tip stalled it into the top of a tree today. Where it remains for now.
THE PROBLEM IS ACTUALLY with the Gyro/Stabilization system intermittently giving full left rudder lock and if not high enough to recover will take you DOWN! I've actually tested it on the bench and was able to make it happen!
Any solutions? Perhaps change the hole that you connect the control rod to?
@@adamg5780 No, not the problem, the actual Gyro/flight controller has a glitch that will intermittently lock the rudder left during flight and will correct if you are high enough to pull out of it.
The only way I found to correct it is to disconnect the rudder and Pin it straight!
I hope you're still here… I just got the airplane given to me. I don't need stabilization if you turn it off do you still have it kick in intermittently on its own… Because after watching the video it did look like a committed suicide there was no reason for it to crash no reason for a tip stall. I think you make sense. So what you think is it because stabilization was turned on and it's just garbage. Is it okay with stabilization off? I hope you're still out here let me know thank you
@@jeffrenman4146 It's been a while since I've flown them, but I believe unstable might not happen? Check what Adrian Stim says maybe that works, but I think it different flight controllers have the problem, you may have a good one? Fly it high to see if it happens, gives you time to recover, I think full throttle is when it happens most? Sorry can't help more. Other guys have just swapped out the radio! When it's working it fly's nice! Good luck. There is lot's of videos out there about it!
if the battery wiggles it can force the plane to tilt on one side
I’m using 700mah lipo from my eachine e130 heli, cut some foam so the battery is in front of the nose.
No tip stal and 15 minutes flight time. Friendly regards, Theo.
Mine would take off fine then not respond to the controls. It was a loose connection to the battery. I sanded a fat 1/16" off of the battery plug and that seemed to cure the bad connection.
i love this channel
I have one and like it a lot. I would post videos but I'll spare myself the embarrassment of me attempting to fly it. Out of the box it assembled fine and was in good condition minus the missing nose cone. Upon completing the plane assembly I put new batteries in the control and there was a short in the power section. It would beep then go off. I opened the controller and repaired some loose wires inside. After flying and crashing from 30+ ft nose first I can say this plane is very durable. Just a little super glue and the nose cowl and landing gear are good as new. If this is your first rc (like me) don't get discouraged by having trouble flying it , I'm sure I'll get better and thankful to have a plane that's pretty forgiving to crashes. I think in 3g mode there's too much auto rudder causing tip stalls and nose spin crashes. In 6g mode I'll take the blame for the crashes inexperienced pilot error. For the money it's worth it. But don't expect it to be simple on the first try.
Can you bind this to a multi-protocol radio like the Radiomaster TX16S?
They should make these stabilzations adjustable so you can set them up the way you like it
Nice looking Plane. It really shouldn't tip stall like that as it seemed to have plenty of speed. May be a Gyro Issue and I don't believe there is Full Manual Mode on the XK Planes. Thanks for the demo and I'll see you in the Air!
yea this plane tip stalls badly.however you can correct this by connecting the the rudder control horns to the inside hole, incredible difference .
Hey bad with charging, is the battery charged when green light is flashing or solid?
Hello there!! I know I’m a little late to the party on this but do any of you know where I could buy new parts for this model?? My son just got it as a gift and we crashed pretty hard and the propeller piece on the engine broke apart. Any help would be much appreciated!!!
Excellent
Will it take spektrum 6 reciever with as3x or SAFE?
Can i change Kanal ?
Motor on The right side and flaps .?
I thinks to buy me one ;-)
If I'm not mistaken I'm pretty sure the rudder and ailerons are already mixed with the gyro on. So if you're adding rudder that could be your problem.
Wished it was me as it's a cool looking airplane. Unfortunately, it's a well known confirmed glitch with this particular airplane.
Beautiful rc plane, it's coming to me too and can't wait to try it. I saw that another youtuber also fell, a radio problem? I will also try it with a standard rx and I will do the video review
By the way, disabling rudder does not help. czcams.com/video/PbC9MpDRC84/video.html
@@Quadcopter101
I tried this plane, it's a radio problem, sometimes it loses signal. I think it is due to the receiver on the model. I will try to figure out how to solve this problem. The model is fantastic and can fly very slowly
@@RCReporter JST needs to be crunched into da bitchofa socket Dude.
@@jonoedwards4195
Hi, I solved the problem, you need to put a bigger capacitor on the motor esc
@@RCReporter You keep experimenting mate and you'll eventually invent the wheel.
XK might even hire you for their development team. :D
I'm two years late I wonder if you're still out here… A friend of mine just gave me this plane and he says it flies like crap tip stall problem… And sure enough I just saw your video and this plane has a serious problem. My first thought get rid of the struts… My second thought carefully check balance and incidents and make sure is not warped. The plane is a little heavier than it should be… After seeing your video I think I'll keep mine for a display only as I don't need to fly it I have others… Hey let me know if you're still out here what did you come up with? I have a feeling I'm way too late and you don't even have the airplane anymore. Thanks for the video nonetheless
Cute little plane and chemtrails.
The stalling while turning has been debugged, first move the receiver antenna away from the two metal rods that control the elevator and the router I hot glued mine close to the acess panel away from those two wire Rods. The next thing you need to do is listen the throws on the ailerons as well as the rudder and I even done my elevator. Since I've done these repairs zero tip stalls and it flies like a dream even in moderate wind. Now with me being a new pilot the only thing I'm lacking I can't get the damn thing to take off I have to hand launch it because whenever I give it the gas it wants to go I believe left and then whenever I let off the gas it rolls straight. However I can land it just fine so hand launching is not a big thing
Sorry but that antenna mod has been "debunked" not "debugged!" The torque roll under high throttle is normal.
Hi , very interesting review but I've ordered one of these last week (not arrived yet) it seems like I might be regretting this purchase however I'll certainly be looking forward to seeing your thinking on the rudder disabling process before I even attempt to fly this plane 🤔 many thanks for taking us through the objective review and with my best regards from Alan in the UK 😊😊👍👍❤
Disabling the rudder does not seem to help. czcams.com/video/PbC9MpDRC84/video.html
@@Quadcopter101 I reckon itsda tip of the wing, the super friendly foiled wing tip area on this Model has no directive pull, the tip would perform the same way as it would going backwards?
Kinda need to just use drudder, an any puff of a following wind,,, Power Farming, China Style, OohH-Yeeee!
@@jonoedwards4195 LOL. Like your style! Ours sits on the shelf waiting for a brain transplant. ;-)
do you know what kind of servos it uses?
there is a permant fix for the tip stall. lessen the throws on the rudder all the way on both the rudder horn as well as the rudder servo horn. if you do this is acts and behaves as it is supposed to
how do I get to the elevator servo horn? my elevator only moves a small amount
What protocol does it use for the radio? I wonder if it can bind to a multiprotocol transmitter?
Yes, it uses KN protocol.
The control horns need to be to the outside hole, not the middle! That's why it's unruly!
Also, in Gyro/Stable mode all surfaces are mixed, and more Throttle gives more up elevator, Rudder is mixed with the Ailerons, and Elevator and gyro/stabile system is defective causing rudder left lock, fly with rudder disconnected and pinned flies better. "Ground Control" covers it a lot!!
Hmm. Looks cool though. Good test.
Nate
of the Rc Saylors had the same to stall issue.
I'm beginning to think that it's not a stall, but inadvertent max rudder via the stabilization system. I'm going to do a follow on review, disabling the rudder, to see if it corrects the problem.
Can be fixed if you lessen the throws on the rudder and the ailerons I've had zero tips stalls since I've done that and also move the receiver antenna away from the metal rods that control the elevator and the rudder after those three things you won't have no stalling issues
What would you recommend for a beginner in the ~$100 price range?
I like the following. czcams.com/video/s1iu5Nwbkws/video.html
I've long had a soft spot for RC planes as well, though is something fixed wing the best way to learn copters?
I'd like to get one for business as some point - a DJI or something of the sort.
Thank you for your response!!!
Ty
what is the kv on the motor and battery cell? seems to be bigger capacity than my umx timber
2500kv. Battery is 7.4V 500mah.
First
That looks like it would make for a good FPV fun flier.
Congratulations. You were first to say First. You win a shoutout in a future QC101 video. Again, congratulations!
@@Quadcopter101 Awesome! Been a fan for a long time. FYI it is pronounced Tie-min. Not related to lion king lol.
Just got one of these. I want to turn off the "6G" flight stabilization system. But when I hit the button, it just blinks, and stays on, no matter what..
Make sure that you are pressing the correct button to turn it off/on (upper right side shoulder button).
@@Quadcopter101 Yeah. Multiple times. Single press. Tried it all.. The rate button on the left works.
I was hoping this bird would be ideal for my indoor RC club gym flights. Don't think so. I've also experienced my share of tip stalls with one of my favorite birds, the XK X450. In fact, have two of them. One for parts. Did you move out of Kaliforny? I was hoping you would after the first earthquake and also the fires ravaging that State. Looks like you are back to PA. Not far from me here in NE Ohio..
Yep, moved to Erie PA. Those two huge back to back earthquakes last summer did it.
@@Quadcopter101 I have a molder in Lake City PA I visit on occasion. I know that area well. My RC club is in Louisville, OH. You know Test Flight is not far from me in Malvern, OH. Presque Isle is a destination I take my motorcycle club rides too..
This park where I'm flying (Pleasant Ridge Park) is very near Lake City.
Quadcopter 101 can you tell me how to install a prop on the Skylark or post a video about it? Thank you, George
It's held on by a single tiny screw in the center of the prop. You'll need to pry off the nose cone from the propeller to access the screw. Regarding using the flight control board in another aircraft.. It may work with stabilization turned off. But not sure why you would do such when receiver's are cheap.
@@Quadcopter101 quadcopter 101 thank you for your reply. I looked on the picture that was associated with the ad where I bought the prop and it looked like there were several different size screws involved in some kind of a black piece of plastic I don't know what the black piece of plastic was but I wonder why there was so many different size screws. You say it only takes one screw? To answer your question about why I use a stabilize receiver it's because they originally tried a non-stabilized one which wouldn't communicate with the transmitter I had for the f949s which is all I had at the time so instead of buying a new transmitter which is relatively expensive I bought a receiver that match the transmitter but they send me the one for the a160 instead of for the f9.9s so it's a whole can of worms
@@georgejunior895 wait a minute. What plane are you flying? Not the A160? The A160 comes with a spare prop in the package.
@@Quadcopter101 it's a scratch Built based on a guillo's kit. What happened was I ordered a receiver for f949 and it wouldn't communicate with my f949s transmitter so I ordered a receiver for an f949s and they mistakenly sent me a receiver for a a160 so I'm trying to get that to work. Maybe some of my decisions were not well thought out I'm just going to try to get this one last attempt to work and then I'm going to hang it up
This good looking Toy has a chronic habit of Farming.
Mine has bought it way too many times.
I'm thinking, "It's not Me, itsda Plane already!"
Going to try an stick a mofo mota onit.
Now to watch Your review Friend.
Itsda plane. Now snap into a slimjim!
thanks, i was about to buy one after watching another review but i think ill hold off now
Itsa Lemon!
I agree, mine sucks.
Hello men, good plane, because it's realistic move, this plane it's sensible ...sorry for my english ...🤗😕
Good day sir. I just posted my diy vortex generator fix in RC Forums just as you suggested.
Thanks!
Yep. Looks like they got the colour right on this one. It's a lemon all right. Pity, as it's brushless and looks a million dollars but if you buy the brushed Volantex V761-4 Sport Cub 500 you'll spend your day out having fun flying while those of us who ordered this will be sweeping up the bits! 😟
If you want a brushless, durable EPP framed plane that flies very well in wind, try the X520 Vtol. It IS a winner from XK.
Glad to hear the x520 is good, just picked one up and waiting to maiden. Agree, spec wise this looks a winner ... but specs mean nothing if it doesn't fly well. I think the Volantex Sport Cub 500 is a brushed motor, whilst the Super Cub 750 is brushless. Reviews suggest both these would be better buys than the Skykark ☹️
@@danp2237 1 thing to watch on the X520 is, especially when switching back to Vert mode, keep the revs up or it will flutter like a wounded duck - use high rates and rip throttle up past 50%! We use throttle stick centered and also modded the dumb motor kill to a single (momentary) switch. Also dremeled out 1 to take a 3s! Flogged hell out of them for 2 years now so a bit of glue and tape here and there but all still flying with only a prop change!
The Sport Cub 500 might be brushed but they are brilliant little toys. The latest issues seem to have motor failsafe now but a tiny bit of CA to lock the motor pinion on can help.
The Super Cub 750 has always been too hard to find/too expensive to ship out in Oz so no knowledge of it. The protocol of the stabilized receiver in it has not been hacked yet unlike the other 2. Enjoy your X520!
PS I find it hard to believe it flies nice when it just crashed twice😋… I'm looking forward to seeing if you're still out here and if you came up with a solution
I'm still here. But I gave up on this plane. But recommend reading through the following forum post to see if any of these folks came up with a solution. www.rcgroups.com/forums/showthread.php?3625019-XK-A-160-Skylark/page7&highlight=xk+a160
9th I really like all of your videos, I want to buy drone when my coin bank is full
WLToys XK A160 VS Eachine P51, which one do you recommend?
Eachine P-51d czcams.com/video/gbi1M4pB-cA/video.html
@@Quadcopter101 Thanks ^^
It would needs some dampers in order to avoid to break the wheels...
I believe they have fixed this plane. I bought one and it’s flown beautifully. 😊
mine handset beeps constantly! is it supposed to...
That's the low battery warning. Put some fresh batteries in the transmitter.
Hi Quad, been watching your videos for quite some time now, and have enjoyed them immensely ! First of all, I only gave this review a thumbs down solely for the performance of the plane or lack there-of !! Your reviews are always spot-on !! It seems like there is some sort of design or manufacturer flaw in this plane's stabilization system. It flew very well as far as I could see, except for the tip stall. What's your assessment ?
Some folks on RCGroups think that it may be the rudder stabilization algorithm kicking too much rudder in turns. As such, I'm going to do a follow on review of this plane, disabling/centering the rudder. Turns will only be through the ailerons. Ifit doesn't crash, then problem confirmed.
@@Quadcopter101 Hey, thank you for the reply Quad !!!
I have been flying this plane the past 3 weeks. Its actually too heavy for the wing area aka high wing loading. Then at high aoa turns with side gust it stalls straight into a spin, usually unrecoverable since the ailerons stall as well. Kind of solved it by modding with diy vortex generators on the outer wing leading edge. It stalls less now, and when it does stall its recoverable since theres still airflow over the ailerons.
Would it be possible to share what you found in the following forum? A picture of your fix would be very helpful. www.rcgroups.com/forums/showthread.php?3625019-XK-A-160-Skylark
Is this a good beginner plane?
Not really. It has problems stalling and crashing.
Bro, is it difficult to fly a remote control plane?
Not really. But I would recommend that you start with an easier to fly plane than this one. I recommend starting with the following simple two channel plane to learn the basics of turning and using throttle. After you master that, then consider moving up to a 3 or 4 channel plane to learn elevator and aileron controls.
czcams.com/video/9m46Y16BiP0/video.html
A little more details on the YF350 czcams.com/video/WYmBKxxJIgo/video.html
Tipstall problem solved, change the position of the receiver antenna away from metal rods as far as possible. I tried it fine. My advice is not to fly in medium or strong wind because the flight controller in 6g mode is not able to stabilize the plane in case of snap and fall! In the absence of wind it is also perfect in 6g mode. To increase the range of the radio change the position of the antenna!
Hello!
What you mean by pushing rx antenna away? Should we put the antenna outside or in opposite direction than it is (I mean antenna should point in front of the plane?? :) )
Thanks for your advice.
@@podstawka6525 Hi the antenna on mine was mounted near the metal rods of the controls, so the range of the radio is reduced, I made the antenna come out from the slots in the cover, so it's okay
@@RCReporter I would be really appreciate if u can send me a photo of your antenna
kompustelnik92 @ gmail . com
@@podstawka6525 To check if the stalling behaviour of this plane has anything to do with loss of signal, simply turn off the Tx (while flying over soft grass!) With any UAV the first thing you should do is, before flying it anywhere, No1 Check that the motor failsafe works with loss of signal (and your plane will not simply fly away!)
No2. Sit the Tx on a stump and (with plane running in hand) head down the road till you lose contact. Then you know the range limits to stay inside. You can wave it about during the trip to check if there are any problems with antenna placement.
My own personal experience with this plane is that the problems are solely due to a poorly programmed flight controller and too high a wing loading.
All in all it's a lemon!
From India
Why do they advertise it as 5 channel?
It's actually 6 channel. Four for the standard flight control channels of aileron, elevator, rudder, and throttle. And two more for the control channels for the rates, and the 6G/3D control buttons.
That tip stall is a bit unexpected for a cub model, LOL. Not bad though for a $110.00 RTF model! Too bad about the tip stalls. That' make this a hard pass! Thanks for review to save me the heartache. ;) Rather spend twice as much and avoid the crappy performance.
Did you move from the desert??
Yes I did. Got tired of earthquakes.
Gosto muito desses aviãozinho mas não tenho condições. De comprar alguém pode doar um pra mim ?
Posting this on as many reviews of this turkey as I can mate.
Watch this for a bench demonstration of the real root cause of the "auto crash!"
XK A160-J3 Skylark 4CH 650mm EPP RTF RC Airplane from Banggood - Part 4: Serious Control Issue - CZcams
Not a great fan of his videos but he deserves kudos for this 1!
Hi, would you mind share the link of that video, about the root cause?
I wandering, is it something about the flight controller ?
@@warmiceUT Just go to CZcams and post "XK A160-J3 Skylark 4CH 650mm EPP RTF RC Airplane from Banggood - Part 4: Serious Control Issue" into the search box.
down side for me is the colour lol great review as always .and way over priced at the moment. but you always find this on a new model.
Ive seen this model on Aliexpress for £58, so quite cheap really.
@@robertkelly5515 It got down to £50 free shipped from the local warehouse in the last sale. Sounds like they're having to dump this POS.
too much elevator in a turn will induce a tip stall. Cubs are also known to be tip stalling fools. I won't recommend a cub to a newbie. While they look easy to fly, they are not as easy as a plane designed to be a trainer. I have one of these little jewels I have not yet assembled. Thanks for the video!!
I think theres to much rudder movement mixed with ailerons and its causing the plane to want to almost flip over and stall
Yep, some folks on RCGroups think that it may be the rudder stabilization algorithm kicking too much rudder in turns. As such, I'm going to do a follow on review of this plane, disabling/centering the rudder. Turns will only be through the ailerons. If it doesn't crash, then problem confirmed.
Disabling the rudder doesn't seem to help. czcams.com/video/PbC9MpDRC84/video.html
LOL, they still use that same remote from Alien XK250 era :D
Yep, here's the X250 and its controller. czcams.com/video/oVYnnypy2Cg/video.html
@@Quadcopter101 I know. Had X250 too. My first FPV quad :)
Stall was probably because your center of gravity was too aft
You didn't say "how do you like my shirt today folks" 😉. I like your reviews, but I don't like this plane. I like quadcopters the most, but planes are also fun. The biggest mistake people do, when they are buying their first plane, that they choose fast or too small plane. You need time for learning and fast planes wont forgive you your bad decision. Small plane is not a stable flyer. I'd choose a glider first with no stabilization min 1m wing span or more. Weight 1kg, 3s battery. No worries if the beginner pilot doesn't like the look of it, he/she will probably crash it multiple times, learn to fly and buy another one. Glider is the best beginner plane, no stabilization. This plane is not for beginners, it won't teach beginners anything. Beginner will destroy it and stay a beginner. Thanks for review, have a nice day.
Cuanto duro ? 1 vuelo.... mejor me ahorro la plata
🥰🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩
Nitishkumar
Can you do a give away haha wish i could get v912 or v913 heli from wltoys
Second to say second
Old dusty bird flew good
4rth
First
3rd
First boo
Third
I want a shout out please 🙏
I'll be releasing a new video within the next 24 hours. If you're first to say First in the comments, the you can win that shout-out.
Ohh thanks thats great I love your channel been watching from day one its the best on CZcams
Center of gravity,,,,, once battery is in plane, measure the wing from forward edge to rear edge very close to the fuselage. Take 20% of the value and make a black marker pen DOT under the wing from the leading edge. This will be your balance point. When you place the plane on your finger tips (tips under left and right side DOT) the plane should balance slightly nose down. Now your with in CG. Different batteries will give you a different CG...but very close. BATTERY must be forward as he stated.
21st 😂😂🛩🛩🌍🛬
If you didn’t t spend so much money on trash you could probably bud a good drone 😂
Ahahahahhaa, so true,,,hahahha.
But RC Planes kick Freckle Dude.
Welcome to the Sky Friend, Ruling Matey,, OohH-YEEeeeaAA!
Burned out wing servo.
DON'T WASTE YOYR MONEY
It is not a waste of money it is hobby
lol
this model is junk, don't bother.