How to Program and Reset a LiftMaster Garage Door Keypad | A step by step guide
Vložit
- čas přidán 10. 07. 2024
- Do you have a LiftMaster garage door keypad and need help learning how to program or reset it? This step-by-step video guide will show you exactly how to get your LiftMaster keypad up and running in no time. Learn how to easily program and reset your LiftMaster keypad with this informative tutorial. Get the help you need now with this helpful video!
Updated video on how to program the garage keypad with your door opener.
• How to Program a LiftM...
Shop LiftMaster
allsecurityequipment.com/coll...
Shop LiftMaster 878MAX Keypad
allsecurityequipment.com/prod...
Shop LiftMaster Secure View Garage Opener
allsecurityequipment.com/prod...
------------- Content of this video -------------
0:00 Intro
0:24 Why you should reset your garage door keypad?
01:58 How to reset a LiftMaster garage door keypad
04:06 Programming your LiftMaster garage door keypad for the first time
06:13 Conclusions
------------------------------------
All Security Equipment
Call: (800) 730-8382
Mon-Fri - 8:30am - 7pm EST
Hablamos Español | Nous Parlons Français - Věda a technologie
Go to 5 minutes in the video to hear instructions how to program keypad
Thank you so much for taking the time to leave a comment!
Good Lord, this is a 30 second video turned into a lecture
Very thorough. thank you for being so in detail. Many people might not realize reasons to change their code often as pointed out in your intro. You might want to add that if you want to clear all codes, you have to hold the yellow button for a certain amount of time…thank you!
Glad it was helpful! Thank you for sharing your feedback.
PLEASE redo the video. I almost fell asleep waiting for the information 😢
Dude. Just program the thing.
Amen to that jesus
All this talk about doing it I could’ve reprogrammed it already before he even got started with the directions. SMH.
Yes. This guy gossip too much. And his instructions on how to reset an existing code is horrible. I lost my existing code and this video can’t help crap.
Exactly!
"Leeft-Master keypad will keep out Moose and Squirrel"
I can't thank you enough for your video. Listen I live in a condo community. My neighbor has been living next to me for 7 years and yet all of a sudden last week his garage door opener started opening my garage door. Lift Master Model 8065. First let me tell you that I have a push button control panel and just bought the 882LMW control panel because it has a lock feature and so I will swap my push button with this new control panel.
I have spent all weekend learning stuff related to my unit and accessories and I read that what I could do to deal with this problem of my neighbor's remote opening my door all of a sudden is "ERASE" all the codes in my liftmaster (there is not a RESET option as I downloaded the manual (and then reprogram my keypad and my removes.
I have these questions for you:
1. if I erase all my codes and then reprogram MY remotes and MY key pad and etc it is true that this will STOP my neighbor's remote from opening my garage door? This concept is suggested many places on the internet.
2. If I use the new "electronic lock feature on the new 882LMW control panel: while it will lock out MY remotes from working will it also lock out my neighbor's remote?
Thank you for your excellent video and your help.
I am following all steps and the system is not allowing the garage to go up or down
thanks I jest reprogram the new pin ......
Thank you for your comment! We're glad to hear that we were able to help you successfully reprogrammed the new pin.
an over 7 minute video that should be no longer than 2 minutes
Holy shit get to the point !
Is this guy being paid by the minute?!
yes, longer videos get another ad break
Can you have more than one code for the key pad to open the door . For different relatives
Thank you for your comment! You can set temporary PINs for different relatives and family members. However, please note that this feature is not available on garage door openers that have a green LEARN button or an external receiver.
To assist you further, I recommend visiting the product page (linked on the video's description). You'll find the manual located at the bottom of the product's description. Navigate to the second page, where you'll find a detailed, step-by-step guide on how to set up your temporary PINs.
I hope this helps, and if you have any further questions or need additional assistance, feel free to reach out!
Kind of an off question. But, will my Chamberlain wall keypad (940EV-P2) open my Liftmaster 81602 garage door during a power outage? The garage opener has a battery back up installed - but wasn't too sure if or how the keypad and the opener will work together in the event of a power outage? Any help would be greatly appreciated as I cannot find any info regarding this...
Yes it will. The keypad act like a wireless transmitter. So as long as your keypad and your garage opener have power it will work.
Thank you for the quick response.@@all-security-equipment
7 minutes of lifetime down the drain. And it doesn't even work. Now I have 2 codes which open my garage. The old one ( which I was hoping to learn how to remove here....) , and the new one. Great. Can anyone help me to remove not wanted codes from the keypad ?
This didn't help me because I can't see where to open to find the learn button. That is what I am here for. Your model is different I guess. the hatch you have is where my light it. Will keep looking.
The learn button, which I think I saw on another video, is the on the unit on the garage ceiling. You'll need your ladder.
Between the factory directions and these various videos I've seen at least 3 ways to program these keypads none of which worked. Please get your act together. These devices are stone age and extremely frustrating to program. It makes me regret I spent so much money to get a Liftmaster opener and then another $50 to get a keypad that is impossible to program into my current system.
Currently having the same issue with my sisters, craftsman opener. It says the chamberlain one will work with craftsman. The Learn light flashes when I hit the button, but it will never opens the door. Like you said, three different ways to program, it makes no sense.
Painful
This video could have been 90 seconds long.
OMG... Get to the point...
he didnt shut up
I gave up.
spend too much time to show intruder, instead to show how to set up the code
Get right to the point, too much talk and still confusing.
YOU TALK TO DAWN MUCH REALLY THATS WHY I DID NOT LIKE IT AND NOT CLICK ON SUBSCRIBER NO WAY TO TALK TO F. Much
The whole thing should be about 20 sec. The rest is irrelevant verbal diarrhea . This guy needs to take an online class on effective communications.