[@weldingandstuff]

Buy here on Amazon Chamberlain Keyless Entry Keypad amzn.to/3xjjzJG
Visit my Amazon Storefront and shop here www.amazon.com/shop/weldingandstuff/list/38F5CD0NISCMC?ref_=cm_sw_r_cp_ud_aipsflist_aipsfweldingandstuff_9WQ192XXA2ETZBWF09KD

[@ashgal81]

LITERALLY...I HAVE BEEN TRYING TO DO THIS FOR 5 MONTHS! You are the only one that has a video or instructions that I understood. Thank you so much!!!

[@user-ic8su5cu7y]

Out of all the videos I've watch to reset my keypad, this is the only way that worked. Thank you!

[@MrPietropastore]

I tried 5 other different sites to no avail. Thank God I clicked on yours. Problem fixed. Great Job. You are a Pro. Thank you.

[@NathanielLaZard]

Life saver!!! I have been watching videos for a while with no results. This simple video got the job done and I am finally able to use my keypad. Thanks a million!!!

[@freshoxygen2176]

Every instructional video should be done this simply and well done. Thank you so much! Was under a time crunch trying to fix a last few minute things for a home inspection and yours was the first video I watched. Lucky me! Thanks again!

[@floraromo3573]

Ok

[@alilaithsaif1234]

The easiest video I’ve watched to reset my garage door opener! Thank you so much ⭐️⭐️⭐️⭐️⭐️

[@tubbyvermin6438]

You are awesome for this! Thankssss.
Moving into my new place May 1st, and the landlord doesn’t know how to do this and told me I could figure it out if I’d like myself. But now you made it look sooo easy. Thank you!!!! Can’t wait to try it and hope it works.

[@johkevw]

I’d been putting this for a long time… thanks for the instructions! My dad always said, if you put it off til the last minute, it only takes a minute. This one actually did!

[@kathykeller1552]

Thank you for this. Was reading the instructions and it seemed so complicated. But now that I watched your video, it made it so much simpler.

[@pattylove4033]

I tried resetting the garage code from the instructions on the keypad and ended up locking myself out of my house when it didn't work. $150 for a locksmith later, I went straightaway to find instructions on how to reset correctly-like many of the other commenters, this was the first video I found and it was PERFECT. Garage code reset, and lesson learned-never leave the house without a key just in case. Thank you!

[@nps2068]

All how to videos should be like this one. All the info you need and none you don't. Thanks!

[@justbasses]

Thank you, this video was very helpful to see you demonstrate and what really helped was that you mention about only having 30 seconds in between!!!

[@lucasdevin7249]

YOURE THE MAN! I watched like 12 videos none of them helped but yours worked!

[@MiszKaleionalani]

I been through SO MANY videos and this is the one that worked. Thanks!!!

[@redtitan2005]

I tried following a bunch of instructions including Chamberlain website. None work but this video was perfect the first time. Thank you

[@CamberHill]

It's good to know that the learn button is under the bulb's plastic covering and mine was on the left side. Your video helped me get something done that has been needed for a couple of years. Thank you

[@jackwesterman3065]

THE video to watch. My chamberlain instructions do not track this which led me to a dead end. Glad I found this.

[@MariaRodriguez-cz5eg]

Very simple and easy to understand, excellent 👍🏼 thank you

[@lurodriguez1]

Thank you so much!!! This was the best and easiest explanation. Thank you for the visual example

[@FOXDADDYSUPREME1]

Thank you! Everything I saw online before this seemed to skip a step, but this worked.

[@LFTRnow]

WATCH THIS if you need to *reset JUST the keypad code (and not all of your remotes) and want a SPECIFIC DOOR to be set to the code you want*.
Saw some other videos which worked, but they required pressing the "LEARN" button on the opener or resetting the whole system for 6 seconds. I didn't want to reprogram all my remotes all over again, and the door button I had was the secondary "doorbell" type (it has no LEARN button on it), so this was GREAT. Didn't realize the instructions I needed were on the panel (LOL) - even so, it was great to see you show step by step.

[@kimmytran9973]

Would this delete all old codes with this instruction?

[@sherrinelson7393]

Very well done… we got it reprogrammed thanks to your great instructions!

[@BHunter244]

Worked like a charm. Thanks for the excellent video.

[@imwalkingthedog]

This video helped me out when my code randomly stopped working this week. Thank you!

[@beverlyelsberry3939]

OMG!!!! THANK YOU FOR THE GREAT INSTRUTIONS! VERY CLEAR AND SIMPLE.

[@13Mphull]

Sir, thank you so much. Clearly, resetting a keypad remote is rocket science. Thank you for educating me!

[@LorenaTreece]

Omg THANK YOU we have been trying to follow the instructions on the inside lid and they were wrong. This worked 🙂

[@williamschul439]

Wow Great information. All the other videos I tried did not work at all. Thank you very much.

[@michaeloquinn4730]

Thank you so much! It worked. I've tried so many different directions before this.

[@LaMa-mw8hy]

Success! Your video clarified the instructions. Thanks

[@TheDalmatio]

Thanks for making this video. You’re the man. 🙌🏾

[@Coretok]

Great instructions video. It worked perfectly. Thank you so much!

[@fayebabbbyyy190]

Perfect it worked first try !!! Your the shit! I was trying so hard too learn from the instructions and it wasn’t happening but you made it superrrr easy!

[@Nabrolo]

Thanks for the second set of instructions. The garage door keypad had the wrong set of instructions on mine.

[@PopularAggression]

Thanks for the information its always easier IMO to learn from watching something be done.

[@SkunkfaceNF]

This was exactly what I needed thank.

[@tercole6884]

Your video was great it worked for chamberlain. Thank you 😊

[@abdisamadfarah1447]

Thank you so much, good explanation and easy to fixed.

[@francinecaldwell9258]

Thank you so much! This was very helpful

[@tamlele7024]

Thank you for your instructions.

[@kelvinduenas2658]

Finally a helpful and successful resource. Thank you!

[@weldingandstuff]

You're welcome!

[@kkforchrist17]

Literally thanking the Lord for you and this video! You just save me a major meltdown on my new house that So many things are so high-tech that it's way over my head (like google nest thermostat off line from previous owner and won't work for us! blinking light sensors that I have no idea how to set up, Smart House features that make me feel dumb) But this one was simple with your instructions. The keypad did not have the right instructions... How crazy is that. Once again thank you thank you

[@hboger100]

This helped quite a bit! Great video!!!

[@MarvinMonroe]

Oh dude your video is the one that finally helped me get it!
First of all, directions on my keypad are similar except they leave out the lines about number of Enter clicks depending on color (my Learn is Orange) my keypad just said hit Enter and then hit and hold Enter if light doesnt flash
So i watched some vids and all they said was hit Learn then put in new code then hit Enter. Never mentioned the hold Star and Pound buttons to start with. And when i followed those vids it didnt set a code
So after your vid and did it just like keypad instructions said and held * and # then hit Learn on opener then hit Enter 3 times since its Orange and then that finally got light to flash and now it works
(Reason it got messed up in the first place is cuz last week after walking dog, she was tugging on leash as i was putting code in and i either changed code or reset code)

[@diannelanier7104]

This was my 4th try and it worked!!

[@tercole6884]

Thank you. You made it so easy.

[@curtissingleton1060]

Job well done. Thanks for the information.

[@PacoRollz]

Thank you!
I was trying this for about 30 mins before I found your easy to follow video.

[@weldingandstuff]

Glad it helped!

[@jacques13092]

Best video that actually works

[@alan19844]

Wow that is complicated, my girlfriend couldn't get it to work, now I know why ... thank you for the posting! I really appreciate it!

[@donniegandolph4934]

Awesome man! Worked great! Thanks!

[@lisa2828]

Omg thank You your video got my keypad working You are Awesome 😎

[@garyhirtz4392]

Couldn't have figured that out ever .thanks. Jesus loves you.

[@mr.booster1481]

This really helps!! Thank you!!

[@kristinagrijalva9844]

The best video ever thank you so much

[@jessicajk13]

Legend. Absolute MVP. Thank you.

[@Triceytrice2u]

Finally a video that worked thanks a bunch i did it!!!

[@sharaesledge1692]

Very helpful thanks!

[@Voltrondefenderoftheuniverse]

Thank you so much 🙏🏻., it worked for me on the first try .👍🏻

[@danielleperrotti903]

You rock!!! Thank you for explaining this!!

[@catherinesickinger1071]

Thank you! That made it so easy!!!

[@christianharris3756]

Thank you for making sense out of this madness

[@Tech_travels]

Omg this helps me a lot thank you sir

[@runningfreak79]

The best instruction video, had to sift through 3-4 AM that that didn’t work before this one

[@ddjslhomebase243]

Was hoping this was to Reset, not reprogram. Good video for setting the code.

[@tayosunmola1991]

Worked. Thanks

[@elizabethparsons4414]

Thank you! Remote instructions confusing! 🙂

[@fabirendon]

Thank you very much for share! It was a success!

[@helloshmonnayy5768]

Truly the best! Thank you

[@MariaOrLex]

Great video it worked

[@adrianajimenez5924]

I’m so profundo of my self (I did it) well thanks to you :)

[@lauramorgante6151]

Thank you so much, your great!!!

[@amandaclairerhodes]

I was so annoyed with this nonsense. Thankfully, your video helped me to do it in under a minute. Thank YOU!!!

[@whyumadbrah2882]

U explain well thank u.....100 thumbs up

[@HarleyFatBoyJr]

Great share Fam. Nice and easy. Mahalo!! 🤙🏾

[@giuliaincalifornia6030]

You are the best explication

[@santinosierra6156]

Bro you are the greatest thank you !

[@joyzenuttakarn3634]

It works!!!!! Thank youuu❤

[@marisolsalazar8650]

THANK YOU SOOOOOOOOOOOOO MUCH!!!
Absolutely the best one!!

[@jamesknight9468]

Thanks you made that easy

[@Tootie2244]

Super helpful. It worked! Thanks

[@weldingandstuff]

Glad it helped!

[@drake3467]

This was the best and most correct tutorial. All the other CZcamsrs are idiots 😂 They totally leave this part out. Had me outside freezing. Even Chamberlains own instructions from their website does not cover it. Thanks !!

[@weldingandstuff]

Glad it helped!

[@revpgesqredux]

Excellent. Thank you.

[@Rigde345]

You just made me some money my friend! Thanks

[@SHAM3MAK3R]

Nicely done

[@wamu8851]

Man, nan, man..i did it following you on the video and WOW it was easy!!!
I couldn't do it following the instructions

[@weldingandstuff]

Glad it helped!

[@flynn4021]

Thanks for making the video. Bought a home and the prior owner didnt know the code so I thought I was SOL.

[@kimberlyhubbard6689]

Thank you for sharing 😊😉

[@josea.ortega1431]

Thanks Bro big help

[@LuisRamirez-xc9bs]

Wow bro! Thank you!

[@tracyalvord6435]

Thank you!!!! This helped a ton!

[@weldingandstuff]

Glad it helped!

[@dannunez2209]

Perfect video!

[@noelsmyth107]

perfect, thanks!

[@njcmatrix]

Thanks helps alot

[@larseep]

Thank you sir!

[@dsskuzltd]

Love the video super hepcul

[@alisons6160]

Thank you!

[@EStringBand]

Clear and concise. Thanks

[@weldingandstuff]

Glad it was helpful!

[@mattiewilliams3056]

Thank you so very much!! Blessings

[@weldingandstuff]

You are so welcome