How I Built This AMAZING 3D Printed FPV Wing? | ULTIMATE Build Guide and FLIGHT Coverage

STL Files: flightory.com/product/mini-pl...
----------------------------------------------------------------
INSTAGRAM ► / flightory_
Web page and Store ► flightory.com
Tech Group On Facebook ► / flightory
FACEBOOK ► / flightory.fb
----------------------------------------------------------------
Chapters
0:00 - 1:01 - Introduction
1:02 - 7:03 - Airframe Build
7:04 - 9:51 - Equipment
9:52 - 12:31 - Flights
----------------------------------------------------------------
Music track: Positive Experience by Aylex
Source: freetouse.com/music
Free Background Music for Video
_____________________________________
Music track: Start by Damtaro
Source: freetouse.com/music/
Royalty Free Background Music
_____________________________________
Music track: Utopia by ASHUTOSH
Source: freetouse.com/music/
Royalty Free Background Music
_____________________________________
Music track: Tropical Soul by Luke Bergs
Source: freetouse.com/music/
Royalty Free Background Music

[@robertgoldbornatyout]

Another great video. Thanks for sharing. Hope your weekend was great, our weather is finally warming up to be nicer flying weather. Have a great week.

[@stevearodgers]

Great build video!

[@andrewjamez]

I only just discovered your website / aircraft. I will be purchasing. I just ordered my PLA-LW filament! Thankyou

[@willssam2390]

I love this plane since ever the foam version.
I built it almost exactly but I could not get the cg right

[@waldemarbiaek3549]

Dziękuję i pozdrawiam.

[@thefivewolves6949]

will it hold a 155mm artillery round ?

[@abdullahafzal9]

Hi...how are you getting the telemetry info on the controller....can you refer nay tutorial..that would help alot

[@shourshot]

awesome! which fpv camera and antennae are you using?

[@andrewjamez]

just a question, does the nose of your Stingray wing partially obstruct the view of the fpv camera?

[@aleksmcwhinney6706]

how are you getting the mavlink telemetry on the controller?

[@irvine40]

What size of print bed would this plane need? Would it print on a Prusa Mini?

[@h1ghf1ve]

Hi, first of all good job and nice work. But i got one concern, what about the thin Layers of PLA on the wings if the sun ist shining and its a lil hotter?
I mean PLA deforms quite fast in the sun.

[@mrantssfpv]

If it’s heat you’re worried about go fast, the airflow the wing experiences is far more efficient at cooling than most cooling systems.

[@tuttuti123]

you should've been more concerned about the ESC heating instead of the sun. But like all flying things go, they experience good cooling. That's why ESCs for flying stuffs can go rated up to 50A without ever coming with a heatsink and 4 of them in a board, and if you look at ground crawlers ESC they all come with some cooling even with the smaller amp rated ones. Looking at this guy's design, there's a whole lot of ducting going on so you don't have to worry about internals heating up either.

[@user-hi4xk1bs2o]

​@@tuttuti1233 REPLIES

[@G-ronnytravelvlogs]

What's the max distance

[@jessejj975]

What size printer you need to make this? Interested to buy if I can easily make it with 200mm x 200mm x 200mm printer capability.

[@FLIGHTORY]

At least 220x220x240mm but you can do it with your printer as well. Most elements can be printed; it might be necessary to split one of the wing segments into two pieces.

[@joseortiz9436]

When you land that plane do you have to replace parts?

[@abhijithsaimandava8574]

You've got to replace the skateboard if you land bad. Same for 3d printed planes.

[@joseortiz9436]

The blades don’t get damage on landing?

[@Rubydude]

The website isn't working. cool project though

[@FLIGHTORY]

Thanks, website is working again

[@user-hi4xk1bs2o]

​@@FLIGHTORY2 REPLIES

[@CaptainCandycorn]

Anyone have the STL files they can send me

[@FLIGHTORY]

flightory.com/product/mini-plank/

[@user-hi4xk1bs2o]

​@@FLIGHTORY2 REPLIES