Love your attention to detail and start to finish builds. You’ve totally inspired me to try my own holsters! I’ll definitely be buying one of yours out of total support to your business though. I’ve paid double what your custom holsters cost! Love your channel and content! Hope you succeed In growing your business! I’ve told all my friends about you!
Just had my wife order me a holster for Christmas lol. Can't wait, although I'm sure with lead times it might not be here by then but that's cool with me.
I'd love to see an M&P Shield with a TLR-6 light and suppressor sights, with mag holster attached as an IWB appendix carry holster. Two color if possible. I'm looking into to making these, and your videos have shown me a lot. Thanks for tutorials. 👍🇺🇸👍
Seriously inspiring. I’d love to see a iwb light bearing taco or sidecar. Glock tlr1/7a or a Sig 365 tlr-6. I remember the one that was titled a iwb light bearing ended up being a owb 🤙🏽
How about a Pocket carrier for one, Ruger LC9mm magazine, black, minimalist design, secure pocket clip- so when you grab your mag the carrier stays put. Newbie here, retired and CCW, beginner.
How much to have a curved three-magazine (7-rd mags) pouch-carrier, to be worn on the right (R) side of my belt, for a Performance Center Smith and Wesson 4" Shield EZ (9mm). Do you carry Vietnam tiger-eyed green kydex? I am also going to order an OWB left handed Level 3 holster in the same color. Oscar
As always, your videos are badass and educational for someone like ne who id just starting out. If you don't mind my asking, what material do you use for your retention spacers?
Pretty simple. The right side needs a channel to the take down pin. The left side doesn't need anything passed the safety. The slide catch is so low from the factory that the grip creates the channel. Personally I cut wood or scrap metal (if the mold isn't already blocked for it) to go over the safety. Or you cut the swestshield just before the safety and don't have to worry about blocking that side at all
I had a question with your video , Before starting your video, not only your logo the movement and music, how is that done ?? I ask Mr, Just Truck'in but haven't gotten a response, Us it something i can put together on my laptop ?? Appreciate any help, Sir
Thank you, I have learned a lot of new techniques. You’re about the only one that goes from start to finish. Keep it up
Thank you so much
Great job learning TONS thanks just started two months ago at age 82, it turned 83 yesterday LMJ
Happy birthday sir!
really clean, man!
TKS, your job is amazing, congratulations.
Thanks man
I love that design...I’m going to make matching holster and mag pouch now. Thanks.
Enjoy!
Man, thank you so much for all your videos. I6m just getting started but you have saved me so much time and headache. Thanks again.
Np! Thanks for the support
Love your attention to detail and start to finish builds. You’ve totally inspired me to try my own holsters! I’ll definitely be buying one of yours out of total support to your business though. I’ve paid double what your custom holsters cost! Love your channel and content! Hope you succeed In growing your business! I’ve told all my friends about you!
I appreciate your support! Don't forget to send some pics of what you create
Great work and a great video!
Thank you 🔥
Just had my wife order me a holster for Christmas lol. Can't wait, although I'm sure with lead times it might not be here by then but that's cool with me.
Whats the name on the order
@@FalTacUnlimitedLLC Barton - just submitted this morning
I'd love to see an M&P Shield with a TLR-6 light and suppressor sights, with mag holster attached as an IWB appendix carry holster. Two color if possible.
I'm looking into to making these, and your videos have shown me a lot. Thanks for tutorials. 👍🇺🇸👍
I would love an EDC tray.
Available on the site. Faltacunlimitedllc.com
Seriously inspiring. I’d love to see a iwb light bearing taco or sidecar. Glock tlr1/7a or a Sig 365 tlr-6. I remember the one that was titled a iwb light bearing ended up being a owb 🤙🏽
Definitely will do that when I can!
Outstanding. Keep the content comin bruh
How about a Pocket carrier for one, Ruger LC9mm magazine, black, minimalist design, secure pocket clip- so when you grab your mag the carrier stays put. Newbie here, retired and CCW, beginner.
I'd probably rock an ulticlip on a mag carrier. Be a good combo for that
How much to have a curved three-magazine (7-rd mags) pouch-carrier, to be worn on the right (R) side of my belt, for a Performance Center Smith and Wesson 4" Shield EZ (9mm).
Do you carry Vietnam tiger-eyed green kydex?
I am also going to order an OWB left handed Level 3 holster in the same color.
Oscar
Excellent work! Can you make a video for a competition holster with an optics cut out? Cheers!
Absolutely. The next one i do I'll film! Also see you soon!
@@FalTacUnlimitedLLC Let me look in the safe - I'll pick one out to order!
🇧🇷👏👏
As always, your videos are badass and educational for someone like ne who id just starting out. If you don't mind my asking, what material do you use for your retention spacers?
What kind of foam? EVA? Thanks! Nice work!
www.holstersmith.com/vcom/thermoform-molding-foam-for-kydex-holster-making-mega-form-12x115x1-p-4292.html
I have not seen how you melted the kaydes I can use an electric oven , and for how long , and these parts where I find( sou do Brasil)
I use ovens or t shirt press
Is it bad that I put a tiny bit of superglue on my blocking because I’m paranoid?
If it works. Rock it
Great work! Can you show how you block out a 1911 for an OWB holster. Just curious how the blocking looks with all the controls.. Thanks!
Pretty simple. The right side needs a channel to the take down pin. The left side doesn't need anything passed the safety. The slide catch is so low from the factory that the grip creates the channel. Personally I cut wood or scrap metal (if the mold isn't already blocked for it) to go over the safety. Or you cut the swestshield just before the safety and don't have to worry about blocking that side at all
@@FalTacUnlimitedLLC Awesome. Thanks. What thickness of kydex to you mainly use for your holsters?
@@mrbreihan .08
8 have a question please, what's the name of that foam? Any place that I can buy it or order it?
Thanks so much!!!
www.holstersmith.com/vcom/thermoform-molding-foam-for-kydex-holster-making-mega-form-12x115x1-p-4292.html
Next build iwb glock 48 with trl6. With clear kydex
clear is very brittle but i have a couple clear builds coming up
What’s the secret to drilling a straight hole for retention sometimes my drill runs or not straight on the back side
Drilling plates and experience lol. Try drilling slower
I agree with Jeff Williams, keep up the great job, what do you suggest if you don't have curved jig? I appreciate your feedback?
I used to curved them by hand. Really not hard at all. Just do the retention holes last
@@FalTacUnlimitedLLC thank you, was thinking about that, thanks for the feedback and "keep bending"or happy bending as you always say
@@davissantiago5177 thanks man! Tons more content coming out. I'm swamped lmfao
@@FalTacUnlimitedLLC until your next video be safe
@@davissantiago5177 tonight! Hahha and you as well
Hey there u enjoyed watching the video how much would you charge to make a double mag holster for a s&w shield?
I had a question with your video , Before starting your video, not only your logo the movement and music, how is that done ?? I ask Mr, Just Truck'in but haven't gotten a response, Us it something i can put together on my laptop ?? Appreciate any help, Sir
Believe it or not I use an app on my smart phone called video maker. Which can be made with a laptop as well
@@FalTacUnlimitedLLC .. Thank you 😊 Sir.
Bor u cool
What tool did you use that contoured to the mags to give you your straightedge at the top? Not sure I described that very well.
It's a contour gauge
Any suggestions on what brand or where to get one.
@@lowdragtactical4742 home depot!
Sorry, Remoil?
Yup. It's a lubricant. So it not only cleans. But it doesn't allow the sheets to stick together
What material is your foam?
www.holstersmith.com/vcom/thermoform-molding-foam-for-kydex-holster-making-mega-form-12x115x1-p-4292.html
Where do I go to order a holster and a double mag holster to go with a colt all American model 2000?
A que temperatura calientas el Kydex en el horno
360⁰
Recoil?
What thickness kydex do you use
.08
What kind of foam are those?
Beige from from holstersmith.
Are you excepting laser work. I rather have someone else do it. The cnc machines are an arm and a leg
Ya I accept laser work anytime. What do you need done? Fomis?
@@FalTacUnlimitedLLC logo for holsters
@@juanclark9824 ya man anytime.