#1 Easiest Trick to DRILL STRAIGHT! (Drill at Perfect 90 Degrees...Fastest Method!)
Vložit
- čas přidán 9. 12. 2023
- Check Out Our Free Guide: 10 WORST POWER TOOL MISTAKES!!
www.thehonestcarpenter.com/
Learn Power Tools Today with POWER TOOLS EXPLAINED!:
www.thehonestcarpenter.com/po...
AFFILIATE TOOL LINKS:
Milescraft Drill Block:
amzn.to/3RBmclb
Kreg Drill Block:
amzn.to/3RC8aQ7
Big Gator Metal V-Drill Guide:
amzn.to/4a8nefL
30 /45 / 90 Drill Guide:
amzn.to/489qgP4
Dewalt 14-pc Drill Bit Set:
amzn.to/3GEcFDI
(Please Note: These are Amazon affiliate links. When you shop through these links, we receive a small commission at NO EXTRA CHARGE TO YOU!)
#1 Easiest Trick to DRILL STRAIGHT! (Drill at Perfect 90 Degrees...Fastest Method!)
Drilling straight into wood or other materials can be very tricky, especially for newcomers. But this short video from The Honest Carpenter will show you what is, by far, the easiest and fastest method for boring holes at 90-degrees with a corded or cordless drill!
A Drill Block is a great way to imitate the efficiency of a drill press.
These little handheld tools help create the initial line-up for drill bits of various sizes, thanks to their calibrated metal sleeves.
Drill blocks can also be used on corners, and even rounded materials.
Thanks for watching!
The Honest Carpenter - Jak na to + styl
It's not a trick, it's a tool.
Tools do tricks. But yeah you have a point.
The click bait is real.
You’d think he’d show the “tool” in the thumbnail
☠️
I tell you
It's ads.
Made me click 😂
Another advantage of using something like this is that it teaches you what being perfectly vertical feels like with your drill. It can improve your free hand drilling.
*freehand Though I suppose one does drill with one's free hand.
I know you have expanded and grown your business. But I have to tell you I really appreciate this type of content. I remember when you first started you had very practical content for guys like me who do not have fancy tools. We have a saw, drill , hammers and screw drivers and of course a carpenters knife and paint brushes. Thank you for this very helpful practical video.
You’re welcome, RK! Always happy to help 🙂
Amen!
Agree!
I'm a retired CNC Machinist and although I didn't need something like this, what I did need on occasion was a tapping block. Same concept but just for starting a tap straight. Made quite a few for me and newbies that came into the shop and they were so surprised and impressed there was something like that around. Not sure how long these have been around but now that I don't have a huge machine to drill my holes, this will definitely be on my Christmas list. Thanks for all of your helpful videos. Happy Holidays to you and all that visit.
This is why I like my old Ryobi drill with a bubble level in the back. I don't understand how this didn't become standard and in fact seem to have disappeared.
I actually used the same one for drilling into tiles. The resistance and smoothness of the ceramic would often force the bit to drift without having a chance to get purchase. Because of the rubber on the bottom of the guide block, it stayed steady long enough to actually do its work.
Theres a simple Trick , Drilling into Ceramic Tiles , But you will have to watch ! My you Tube , if ever l decide to go Ahead with that !
I'm a senior female, I got one of these years ago. I noted that when I'd see others drilling, they'd appeared to be doing so at an angle, even did so myself. So invested in one of these myself. I love using it when needed ! Men folks don't expect me to know and have these little "do dads" on hand !😅😅😊
TIP for centering the drill block EXACTLY where you want to drill. Use an awl to make a small indentation where the center of your hole is to be. Using a small bit - maybe an 1/8", drill about 1/8" deep freehand. Now fit the bit that is the size of the hole you want to make. Slide the drill block over the bit and all the way up to the drill chuck. Now, while holding the drill block against the chuck, you can place the tip of the bit exactly into the pilot hole while keeping the drill as vertical as possible, then slide the block down to the surface of the work piece. Now, while holding the block firmly, if it is not completely seated flush on the work piece, adjust the drill until the block is completely flush to the work piece and now your bit is exactly perpendicular and you can drill to the desired depth. For large diameter holes just use this process starting with smaller diameter holes and work your way up to the final desired diameter. This ensures the location of your hole is dead center of where you want it!
@peterm2227 yeah that seems much more useful than them doing the exact same thing but drilling a pilot hole first. It’s probably also more precise to just start with the tip of the bit you will be drilling with than their method, it’s probably easier to centre the point of a drill on a mark rather then centring the tip of the drill bit in a hole. It’s much faster too to just use a single drill bit and not have to worry about changing bits.
@conorstewart2214 that's how you crack wood
Thanks, Mark.
I made about the same point (except for the awl) then saw yours. Guess I'll delete mine now.
just feed the drill bit all the way through the guideline up the point where you want it and hold it in place as you slide the guide back down to line it up straight. Then drill. Simples.
I got the same one when I wasn’t drilling straight for cornhole legs. Big difference for a novice like myself. You hit the best issues ALL OF THE TIME!!
Even better is a drill with integrated levels. That's why I'm still using my 1990's blue Ryobi drill. It has a horizontal level on top and a centering level on the back of the barrel, so both horizontal and vertical drilling is true. This no longer seems to be part of drill/drivers today, which is a huge oversight.
I glued a surface level to the butt end of my Makita, and it’s saved me a lot of time and trouble. Unfortunately there’s no room on top for a horizontal level.
I did the same but for this to work the piece has to rest on a perfectly level surface
I have that drill still and love the level. Unfortunately all my batteries are dead.
@@pazu8728 FYI, all Ryobi batteries fit all Ryobi tools, no matter how old.
You would think this would be cheap enough that all major drill manufacturing companies would design this into their drills. Unfortunately, EVERYTHING seems to be just getting to be more and more poorly designed pieces of shyte. I've been through 3 DeWalt impacts this year. The first one, I only drove 6 lag bolts with it before the bearing in the chuck broke so the driving bits fall out. This is a huge hassle. Especially if you're up on a ladder or scaffolding. The other 2 didn't last much longer. The FIRST 20V brushless DeWalt impact I had, when they first came out, lasted several YEARS before that bearing broke. I'm so sick of companies making everything cheaper and shittier but charging more and more money for their products.
The trick is taking out your credit card.
I'm a noob and horrible in the shop 😂 I like these simple suggestions. Worth their weight in gold 🥇
Fabulous! Prevents it from bouncing around as well.
Thanks, HC...this is terrific.
I've been subscribed for a good while now, and THIS is exactly why! It's all these little hints and tidbits that make you a great resource for amateur me! Thanks a bunch!
This is a great tip. And very timely. I have to drill some deep-ish holes into the edge of 3/4" MDF to mount some furniture leveling feet. In the past, my wife would 3D-print a single-hole drill guide for me; I had no idea these multi-hole guides existed. I like Kreg tools, so I bought a Kreg drill block. I can't wait to get started. Thanks for the video.
Amazing, thank you. I've been looking for something simple, quick and reliable. You answered all three!
2:57 really helpful. I’ve bought several of the items you show us as presents for my friends and relatives. Lots of workmen don’t know about a lot of these helpers.
I happened across the milescraft block a few year ago and really liked it, great to know I'm not alone!
I'm 49 and up until now, I didn't know these existed. What a simple and brilliant tool. Thank you!
Unreal Eric! I was not aware they even made drill blocks. Especially drilling at an angle, or the one with lines on the side.I appreciate your sharing, which adds to my gaining more knowledge and tools! 👍⚒🔧
I highly reccomend one of these drill blocks. SUPER cheap and super handy. I'm reaching for it in these situations often in our shop.
Very effective solution, especially for the ones who are not expert but curious for simple handwork. Thanks mate.
Great tip , i worked in the aviation for over 35 years , way way back , we made our own using a drill press or having the machine shop make them. They definitely are practical , love watching your videos 👍 awesome stuff
I'd think to make my own but where am I going to find a block of steel that thick?
25year carpenter, and this vid was great. I have never used one of these, and now I will be buying one tomorrow. Thanks for the tip!
Same here!
I had no idea these existed! Your channel is the gift that keeps on giving. Thank you!
Great idea. Think I’ll make my own using my drill press and a block of hardwood. Thanks for posting.
I never knew something like this existed. Thanks for another very useful video!
Who said you can’t teach an old dog new tricks. lol
Learning new things from you pros all the time. Appreciate it a lot Ethan. Keep up the good work my man !!
Thank you Bill, will do! 😄
I could have used one of those blocks recently, but didn't know about them. Thanks for this tip for my future projects. 👍👍👍
This is great! I've never seen anyone demonstrating a drill block and I appreciate the tip. Thanks!
Great tip! I'll look online for one now! Many thanks.
Super simple and versatile too. It'll make a great stocking stuffer! Many thanks for all you do, I always appreciate your posts. Merry Christmas!
thank you for showing me such a thing exists; i'm gonna check it out and buy one for myself ASAP!
Although I'm originally from New Marske (1956-1981) I went to senior school in Marske by the Sea, back then it was called Bydales County Modern and I left in 1971. I met my first girlfriend in Marske Square and have spent many hours on the beach, it was even part of our school cross country course. This video brings back great memories. Thank you.
Thank you. You solved a bunch of problems for me in just 3 minutes.
Thanks. I've never even seen these before while browsing tool sections. Got you another sub.
Thanks Ethan. It looks so easy I have to get one! You're the best. 😊😊😊😊❤❤❤❤
Wow what a great, simple, and inexpensive idea! Thank you so much, I'm definitely going to get one!
I’ve only just stumbled across your site. From an old(er) female, who was never taught anything more practical than how to put on lipstick straight, thank you, thank you, thank you! I’ve struggled getting anything straight, but this is such a simple solution. Now I’ll be searching your site for how hammer a nail straight - though this gadget might help with that too. Thank you so much again!
Happy to help, Marilyn! 😄
As someone who is brand new to the DIY world, these helpful tips are so useful. Thank you.
Milescraft is a great brand with lots of practical little gadgets. You should check them out.
I haven't really been that interested in these, but seeing how easy it makes drilling into a pipe or at an angle might have sold me on it
Another tip I learned from Rex Krueger is to keep a 90° reference in your sight line while drilling or making a square cut. Just having the vertical edge there will make it easier to intuitively hold the drill vertically
This is a very useful tool and video. To mark where I want to start drilling, I usually use a nail-set to make an indentation, then place the block over the hole, the tip of the bit will settle into the indentation and allow me to find the exact center.
Never knew a tool like that even existed. Thanks Ethan for the heads-up. 👷🏿♂️
Sure thing, W! 😄
I didn't know they had saddles to sit on the edge of lumber!! That's so cool!!
I could do dowel holes like that!
Thanks!
I've been using one for years. Since I work with 6 different brands and sizes of drills/impact drivers, no two of them have the same feel. A drill block gives me consistent accuracy with all the drills I use.
I'm glad you're posting new content
Nice vids. Straight to the point with details and accuracy. Thanks!
Perfect for me. So many times without making a pre hole, with a nail, my drill would go in crooked. I saw this somewhere and though it’s just what I need. Thanks for showing how to use it.
This guy is the best. Very valuable information, knowledge and experience 🙏😁❤👍
Brilliant ! I wasn’t aware of these but will get one. Thank you.
WOW who could have guessed... a tool design for that is the way to go... WOOOOOWWWWW, BEST CHANEL EVER, it's not like I'm gonna ban it from my feed or something using the don't recommend channel on the options of youtube
Thank you for providing such incredible great advice.
Great video. I’ve found that using my middle finger (instead of my index finger) on the trigger of the drill has significantly improved the accuracy (angle) of my drilling. Your index finger ends up along the side of the drill, pointing in the direction you want to drill. Give it a try!
Yep! This is a technique we used in building airplanes, along with using an "egg cup." It does exactly what you said.
You just genius and you are truly "the honest carpenter" ❤
I needed an exact 90 degree hole a while back and ended up buying the Milescraft drill press you showed in the beginning. I had no idea they also did something called a drill block which achieved essentially the same thing. In fact, I had no idea drill blocks existed at all until this video!
Having said that, I needed to use a Forstner drill bit for that task so the block would not have been suitable there but I think I'll get a drill block too as it is lighter and easier to use for normal drilling. Thanks for the info!
This was a big help! Thanks for sharing this.
I have one of those DrillBlocks. They work great when having to drill a quick perfect 90° hole.
I love your content. These tips are such a great help. I am also in awe of how neat your shop is. 🤔
Short and sweet! Great tips, thank you!
Many of us greatly appreciate your tips. Thank you.
Great content. Well presented. Thanks. I wish I'd found your channel sooner.
I have that exact drill block & it works great plus stair stepping your drill bits is an excellent idea.
I bought one a few years ago to ensure the holes I needed to drill through my front door to fix a door knocker which had to be spot on. It’s been really useful ever since.
Top notch video. Instead of trying to sight down through the hole, simply slide the drill bit through the appropriate sized hole of the block and then slide the block up to the chuck so that the drill bit is exposed through the bottom of the block. Now simply place the point of the bit onto the mark and allow the block to slide down the bit onto the work surface thus squaring up the bit to the surface.
Brilliant that mate ,Happy New Year.
I confess to a smidge of resentment for not having invented these simple, but oh so necessary little gadgets in my youth. Hopefully, whoever did is rolling in the green!
Agreed, monkey! 😆
Thanks Ethan. I have that exact block and it is great. Cheers
You do it exactly the way I’ve done it for years, and I couldn’t agree more! I even have the same guide. Maybe the first video I didn’t learn something new from you, but the confirmation made me feel good! 😂 A bonus tip: If the guide thickness prevents drilling to the required depth, I sometimes use a longer, narrower bit to get the depth I want, then remove the guide and drill with the bit I need. Starting with that full-depth pilot hole makes it nearly impossible to drill the final hole skewed. (I could also buy a collection of long bits, but I don’t really need them.) FWIW, years ago I had one of those portable drill press guides, and it was dreadfully inaccurate. Thanks again, Ethan, for your content, which is always clear, to the point, and great advice.
Thank you, Phil! Great points 😄
I always like your videos. They are well done and informative.
Great and simple inventions, these drillblocks! I've got a few of them, all of different make and with different additional features: the simpler, the better, though.
Don't look through the hole, but lift the block up to the Chuck, place the drillbit's tip in the exact location, bring the drill in a near square angle and only THEN press the block to the workpiece. Really, a child can do it.
I never thought about this technique, but I should have. Thanks.
Drill blocks? Who knew? Great tip.
Thanks for sharing this . I added it to my Christmas list !
I use a mini level attached to the drill and the block that came with my dowelling rig, but I'll buy one if these too because tools are our friends 😁
I've been using that milescraft for about 8 years now , hasn't let me down yet.
been looking for a solution like this one...thanks a wack! 👍🏼
Good tip thank you. I have ordered two from Amazon UK.
Thanks! 60+ years of building boats, airplanes, and musical instruments, and I've never heard of a 'drill block'.
Thank you for letting me know these things exist!! 😲 I'm barely a home handy person because I can't drill or saw straight 🤣
Ethan years ago DeWalt use to have a 3/8 corded drill that had a level on the back of it for drilling straight but these days all the drills have gone away from that simplicity
You’re right Fred-a handful of models still being made today, but not by many companies!
Age 69, nobody ever told m about drill blocks before!
Me neither
another wonderful, useful video
thanks
Great tip, Ethan! Just in time for Christmas too.
The Bosch 1/2" drill that I just gave to my son had a bubble level on the the end of the motor that worked great. My new 1/2" Milwaukee drill doesn't have one.
Very useful tip. Thanks a lot.
Did not know of these. For tubes very interesting.
Great tip,thanks
Just ordered it! Thanks.
Great guide man...! Thanks
I've always struggled with this. I'm about to be putting some cabinet handles in and will definitely use a block like this to make sure my holes are straight all the way through!
You might want to get a cabinet hardware jig. Kreg has one for about $25.00 It allows you to set up where your holes are gonna be drilled on each cabinet, in relation to the edge of the door, so once you have it set up,you take the jig from one door to the next, clamp it on, make your holes and move on. Otherwise, you have to measure for each door, and you are bound to have a couple of them end up off a little bit.
thanks you just saved me buying a drill press!
VERY useful tip - thanks!
You sir have a consistently great channel!
Thank you!…you’re the best
I'm a fan of the Big Gator for its many hole sizes. I also try to mark with an awl or punch first, feed the drill bit through the drill guide hole, insert the drill bit tip into the hole, then slide the drill guide back down to be flush against the surface. Works wonders to drill holes perpendicular into joists for suspending ceiling storage racks or when using long drill bits.
now that is an Honest advice !
Preach brother! I have that steel Gator one, use it all the time. Couldn’t do without it, especially with my trust bradawl to start the hole
Good tips, SJH! I like the greater variety of diameters on that model 👍
Very cool little tip!
Oh man such a timesaver! Aff link used for the Kreg! I use Kreg for cabinets so it worked.
Excellent method. Thanks!