Review of the 31 Plate HHO Dry Cell From GreenfuelH2O
Vložit
- čas přidán 19. 06. 2011
- This video is a quick review of the 31 plate HHO dry cell made by GreenfuelH2O. This is a very nice dry cell at a fair price. Now available for sale at www.hhoconnection.com
- Věda a technologie
MAN! You are the first guy I have come across in this business/youtube circus that states the effect toghether with the production -that's our measure of efficiency.
Thank you for your kind words. We at GreenFuelH2o work hard to provide our customers with a high quality, efficient and cost effictive product.
Steve
Yes, just go to my website, I have a couple of different ones available. Shipping is available internationally as well.
@vipond50 I actually did take the reading from the sides of the plates. It's just hard to tell from the video.
@kaverdaja If you want to draw more amps, you need to add more electrolyte. With 6 neutrals your electrolyte needs to be mixed very strong.
The plates can be any size. For gasket thickness I recommend 1/16 inch.
@kaverdaja It does not matter. Whether you end up with a positive or negative just depends on the number of stacks of plates. In other words one stack ( + 6n - ) or two stacks ( + 6n - 6n + )
@GmanBB I plan on it as soon as they send me one to test.
That usually means that you are using too many amps for the size of your cell and/or you are using a cheaper grade of stainless steel. You should only use 316L stainless.
Thanks for answering, i have a cel esactly the one on this video, but, do i nee O2 + MAP EFIE or just O2 EFIE? I have a 1996 geo tracker 1.6L
@wdanielbern Yes, you can do that by running a positive then 57 neutrals and a negative. The only catch would be that you need to convert the AC to DC using a bridge rectifier. If you go to my site you will see that I am selling a 59 plate unit from GreenFuelH2O and home units from Punch HHO that do just what you described. You just need a lot more steel if you want to run 110 AC to DC.
Hi Mike, I agree thats a good cell design however I like HHO Connections design with the bolts going through the plates and gaskets. Anyways my question on the HHO Design is what would be a good insulator for the bolts? Just a rubber hose that fits over a 1/4 bolt? I thought about buying 1/4 heat shrink tubing and 3/8 shrink tubing and double it up. Therfore the hole size in all the plates would be roughly 5/16. I'm just not sure if heat shrink tubing will be a good isolator... Any advice?!
I see lots of talk about cells, building cells, improving cells, this cell vs that cell. I see green fuel has some videos showing on the road before and after results. I wold like to see more of that side of the research.....any other videos showing the final results I seek?
@kaverdaja Your electrolyte is full strength, you must be pulling some very high amps. + - + is a very bad way to run your cell unless you are wiring them in a series. Basically you just want to get 2v per plate gap by whatever method possible.
That is just to look cool in the background, nothing else. And yes you can run a generator on 100% HHO but you would need to power the cell from another source in order to make enough HHO to run the generator. You cannot do a closed loop system if that is what you mean.
Donde se puede ver el video cuando hiciste esa celda, soy de Venezuela aca el combustible lo regalan , es decir para que tengas una idea , con un dolar llenas el tanque 10 veces. Pero me apasiona este tema
After running my wet cell the water discolours after a few minutes do you know what could be wrong with it?
Yes, that is one of the functions of a bubbler.
Hello mike, I always wonder why do you have hho producing on your background what are you supplying?, and I want to know if I can run a generator 100% of hho.
Thank you
Hello there .. can you please let me know how you make the dry-cell to be water proof? none of the youtube videos goes into this particular issue. all the best
Well I only have 9 plates but I do have another 2 that are a bit thicker but are still 8x8 inches. So if I went with -nnnn+nnnn- would this be better?
Thanks.
What do you think is the best HHO generator for my car? All its going to have is the power from the car battery.
Do you use just water? Or what do you add to the water?
Shrink tubing should work fine, just kind of expensive. Ay kind of thin rubber, PVC tubing or neoprene will work.
I cant put the link here but look for my video called "HHO Wet Cell vs Dry Cell - Why the Dry Cell is Better".
What amp fuse (Domestic wiring) does your power supply run off Mike?
Please make video on a punch slim cell.
hey mike i have made 6/6" 41 plates -nnn+nnn- ,6 stake 35amps iget 2lpm the active area is 5" circule. is it good or not.shahid mughal
Plates should be at least 20 gauge if not sanding or media blasting and 18 gauge if you do. If you want some just like in this video, you can order them directly from GreenFuelH2o just add a dot com and you got it (I can't post links here).
I expressed myself incorrectly. I meant what's the difference if it starts and ends with positive (like +6n-6n+) or start with positive and end negative. Does it matter?
how many plates would you recommend for a 455 big block buick? and you said this wasnt the most effective cell whqt would be the best one for the price that they have?
hey Mike, can I use a bubbler as flash arrestor..? kindly reply.
what is better: -nnn+nnn- or -nnnnnnn+ i would like to know before i go any further with my cell, from what i have been reading it is best to get low volts but a happy-medium amps around 18 amps. also how many amps do you think i would draw on each of these configurations. my dry cell plates will be 8x8" drawing from a 12v car battery .
thanks
OLA. queria saber as medidas da placa,ja tenho a chapa de aço, mais não sei qual o tamanho que tenho que cortalas poderia me dizer qual o diâmetro das placas e qual a espessura das junta pra eu fazer ...obrigado
how thick should the plates i get be? and where is a good place to get some for a good price?
Hey Mike, do you sale flashback arrestors on your website, if yes, how is the shipping procidure.?
@madelainejulien 316L Stainless Steel
Thanks
I went to both the hhoforums site and the aussie site. Had real difficulties joining. Is there a way around that?
Greetings from Estonia.
i made 22 plate dry cell. +6n-6n+6n- 5.5"x5.5" 3mm thickness.
It runs about 13V but i dont know real amps.i I bought by mistake AAC digital clamp. I did put 5amp fuse between and it did not go broke. It produce about 1 lpm. Any advice to make it more efficient?
and more amps produce more hho ? I use about 20% NaOH . I have seen many plate setup as example + - + . Why or are this better setting than + - + -
Thanx for answer.
how much hho iproduce with your plates configreation and amps .different types of experiments ih done / not more then 2 lpm hho in30 to 35 amps please help.
what's the material you used to build your dry sell?
Those are the specs claimed by the manufacturer.
i have a question please.. why you don't connect all the plates with electricity? if you connect all the plates +- +- +- what will be happen? what the plates are doing whith out electricity?
sir,how hho cell keep a certain water level?cos i can see water tank upside,,,let me know plz,thanx
Use only distilled water with either Sodium Hydroxide (NaOH) or Potassium Hydroxide (KOH), nothing else.
Shoot the plates not the poly sides ...
You will find varing temp across the two stacks
you should be using 5 neutral plates between each + and - plate. It should look like -nnnnn+nnnnn-nnnnn+nnnnn-nnnnn+nnnnn- (37 plates)
Those are the specs from the guy who makes them.
No, HHO is meant for supplementation only. It is far too complicated to run an engine on 100% HHO.
im going to put HHO in EFI, do i need PWM for it? whats the purpose of PWM? It helps EFI Engine, or it helps the HHO CELL?
I have EFI engine, do i need to adjust the gasoline fuel supply(tune up) or no need?
thansk! Do you delivery in Philippines. tnx
No,see the comment above.
Yeah, I'll get right on that.
Thanks for replying anyway. I think I may just know the right man to sort out the .au problem. I`ll let you know.
And I need free rent, I wish it worked that way.
Watch my video called HHO Neutral Plates Explained.
Sorry but I don't understand what you are asking or saying.
If the generator anode (+) is not Platinum it will not last very long. I have been running a Platinum anode cell for almost 3+ yrs and still going.
Specs:
31 Plates, 4x6 inch
60 amp max.
Up to 6.5 liters per minute???????????
5 to 8 liter engines
MAN the cost of that cell is too big...284$
Sorry Colin but I have no control over that.
why would you post this in your page it's s no true ?Specs:
31 Plates, 4x6 inch
60 amp max.
Up to 6.5 liters per minute
5 to 8 liter engines
Neither, you should use 5 neutrals like this -NNNNN+NNNNN-. Watch my video called "HHO Neutral Plates Explained" and my last one called "How to Calculate Maximum Amps for a Dry Cell". I can't put links in the comments so you will have to go to my channel and look for them.