Replace Bad Sway Bar Link Even When Stuck - FiLoose Clunking Noise
Vložit
- čas přidán 29. 05. 2024
- If you hear a loose clunking noise coming from around your wheel when you hit a bump or rough road, more often than not it's your car's sway bar or end links.
In this video, Josh shows you how to remove even the most stubborn sway bar links and replace them with new ones. This is definitely a job you can do so follow along and save money!!
Thanks for watching and if you haven't already, please like this video, subscribe to our channel and hit that notification bell so you get alerted when we put out new useful content! It really helps us continue making these videos.
Mahalo! - Auta a dopravní prostředky
Very good and detailed explanation
Very helpful your videos, thank you!
Some handy ideas for sure. When I replaced the original front links on my '03 CR-V, there wasn't enough space between the mount and the ball to get a purchase on it with the vice grips. I tried using a propane torch on the seized nut. Instead of breaking it loose, the penetrating oil, rubber boot and grease started burning, which melted the joint's socket and allowed me to pop the link off of the ball. I was then able to hold the ball with the vice grips and get the nut off with an impact wrench. After that mishap, I decided to cut apart the other joints with a dremel and cut off disc, pry them apart, and use the vice grips on the ball again. That went much better! I thought about cutting through the stud with an angle grinder, but I it was too tight in there.
Geez!!
As ways great stuff. Very useful.
Glad to hear it 🤙🏽
Do u have to get an alignment after replacing them
@ 2:25 ----> skin your knee on the reef while surfing, brah ?? 😃😃
Thanx for the no nonsense informative vids !!
Skinned it on the mountains ;)
Hello, I like ur videos. I have a camry 2017, I hear click noice in the back two rear wheels when vechile starts driving after stopping , specifically when I have passengers in the car , but it doesn't creat that sound when I'm only one in the car. Any idea what might be causing it?
I need advise please 🙏 , it drives me crazy
I would get under and inspect the suspension elements. Sway bar links are common “clickers”, but we have a good suspension inspection video on the other stuff too
Sir I need your help, I have a old 2005 Mazda tribute and it has many cons to it. One of em is whenever I drive it thinks the driver side door is opened and won’t stop beeping from as soon as I put the vehicle into reverse, drive, neutral or any gear but park. Do you have any ideas on how to fix it? It’s very annoying and I need help thank you.
Usually there is a pressure switch inside the door jam, that can get pushed out of place or broken so when the door is shut the button is not being pressed. Test the one on the drivers side to learn how it should work. They are cheap and easy to replace
I need your help sir. My car keeps making a clunking noise but my sway bars are in tact . I have a 2019 dodge charger r/t any suggestions?
Check out our video on suspension noises, maybe your problem is there!
Can i remove the front sway bar links from both sides in order to do a test drive? I think they are making a sound i want to be certain.
If you remove both, the sway bar can just flop down onto the ground or other parts of the car. DO NOT do it! One at a time
❤