Tenere 700 Black Widow Exhaust - Sound and Install

Sdílet
Vložit
  • čas přidán 6. 09. 2024
  • Install and sound comparison of the 300mm Black Widow Stainless Hex slip on silencer for the Yamaha Ténéré 700
    #tenere700, #T7, #adventurebike, #blackwidow , #install, #yamaha, #diy, #exhaust, #ktm, #bmw, #triumph
    Installed
    Black Widow 300mm Hexagonal Brushed Stainless exhaust
    Favorite Tools
    T-handle allen wrenches- amzn.to/35FZBK3
    Motion Pro t-handle -amzn.to/2Gx1HCz and amzn.to/2GFtelg
    Tools and products every motorcyclist should have...
    Maxima waterproof grease -amzn.to/2Ic8iiO
    Honda chain lube/cleaner -amzn.to/2GjzAHK
    The best spray polish ever made -amzn.to/2I98TBV
    Purchasing from the above links pays a small commission to the channel but doesn't cost you any extra! Please help support MotoSouth and check out my other how to videos.
    *Installation of critical components should be performed by a qualified mechanic.

Komentáře • 36

  • @williamrae9954
    @williamrae9954 Před rokem +1

    I'm running Arrows headers, custom mid-section, and a Chinese fake Akra with a K+N filter,and a 3D printed airbox lid on both my CP2 bikes,no ECU flash needed...night and day,and it doesn't cut out as with the standard exhaust...'21 model Tracer7, and '16 model XSR700

  • @mrhalish
    @mrhalish Před rokem +2

    Hi, nice video... don't you need to add a new gasket after removing the original..? Or is that what the paste is for? Thanks.

    • @MotoSouth
      @MotoSouth  Před rokem +1

      The paste seals the connection between the two pipes. If you were replacing the header pipes, you would need to also replace the gaskets that go between the headers and the cylinder

  • @edgarsmiluns9896
    @edgarsmiluns9896 Před rokem +2

    Hi! Nice job! What about the distance between muffler and the swingarm? Is it more or less like with the original muffler?

    • @MotoSouth
      @MotoSouth  Před rokem +2

      The silencer is narrower so there is more clearance

  • @SnelleJelle_
    @SnelleJelle_ Před 9 dny

    you keep you're warranty with this slip-on? nice bike btw!

    • @MotoSouth
      @MotoSouth  Před 9 dny

      Warranty should be fine with a slip on. Although it’s very rare that there would be an engine issue anyway. These bikes are so reliable

  • @JohnnyHotdog96
    @JohnnyHotdog96 Před rokem +1

    So I’m installing mine tomorrow how long did you have to wait? If at all, for the paste to settle? Thanks again for the video

    • @MotoSouth
      @MotoSouth  Před rokem +1

      I didn’t wait to run it. It looks like the heat hardens the paste and creates a seal. No leaks that I can see

    • @JohnnyHotdog96
      @JohnnyHotdog96 Před rokem +1

      @@MotoSouth yep did the install and running sweet thanks for the feedback :)

    • @MotoSouth
      @MotoSouth  Před rokem

      No problem. Ride safe 👍

  • @victorrocavarela4019
    @victorrocavarela4019 Před rokem

    Hi friend, I have a question, what model of panniers do you use?, thanks

    • @MotoSouth
      @MotoSouth  Před rokem +2

      The racks are from andystrapz.com and I have a pair of Tusk soft panniers mounted to a quick release plate from Giant Loop. I need to do a video on that setup one day soon. It’s really compact, holds a lot of gear, and is easy to remove when needed.

  • @onanyshitesunday
    @onanyshitesunday Před rokem

    Hello I’m thinking of getting this exhaust for my world raid , can you tell me ..does it come with the link pipe or do you have to order it separately? Many thanks in advance

    • @MotoSouth
      @MotoSouth  Před rokem

      It does come with the link pipe but if you want the headers they are separate.

    • @onanyshitesunday
      @onanyshitesunday Před rokem +1

      @@MotoSouth that’s great thank you …just seems a real bargain for something that looks so good and sounds like it does that’s all. Ill get my order in asap.

  • @nemerkha
    @nemerkha Před 11 měsíci

    Just ordered the same for my WR.
    How bad is it when touring WITH baffle in? Say anything over 65-70mph?

    • @MotoSouth
      @MotoSouth  Před 11 měsíci +1

      I normally ride with earplugs and honestly the wind noise is more bothersome than the sound of the exhaust which isn’t bad at all

    • @nemerkha
      @nemerkha Před 11 měsíci +1

      @@MotoSouthgot it delivered and fitted. It’s fine with baffle, like it much more than stock. Rode it for an hour in town without a baffle though, that was just too loud for my liking. Had to ride with my mouth open!

    • @MotoSouth
      @MotoSouth  Před 11 měsíci

      @nemerkha I prefer it with the baffle. Just right

  • @slateru
    @slateru Před rokem

    No springs?

  • @markjob
    @markjob Před rokem +1

    Great Video . I order the same today . Do i need remapping with slip on ? Tenere 2022 model euro 5?

    • @MotoSouth
      @MotoSouth  Před rokem +2

      Not necessary for slip on

    • @markjob
      @markjob Před rokem

      Thanks man 👍 when DB is Out ok too?

    • @MotoSouth
      @MotoSouth  Před rokem +2

      Yes. Only a full system would require remapping

  • @frdeadchannel
    @frdeadchannel Před rokem

    does the paste come with the exhaust? or did you buy that separately ?

    • @MotoSouth
      @MotoSouth  Před rokem

      It’s included with the exhaust

    • @frdeadchannel
      @frdeadchannel Před rokem +1

      @@MotoSouth Thank you, getting a blackwidow for my yamaha ybr soon, just researching a bit as ive never installed one before

  • @brentleslie8617
    @brentleslie8617 Před rokem

    What size is the spark arrestor?

  • @doctorv6197
    @doctorv6197 Před 10 měsíci

    I've got it....

  • @Maciekat
    @Maciekat Před 6 měsíci

    Amount of paste 😮

  • @drady8541
    @drady8541 Před rokem +2

    Omg.. the black rubber js so bad adjusted…

    • @MotoSouth
      @MotoSouth  Před rokem +1

      It had a tendency to misalign but it’s been fixed. You can sleep better tonight 😂

    • @drady8541
      @drady8541 Před rokem +1

      @@MotoSouth thanks god ! 😂😂

  • @clearskye4381
    @clearskye4381 Před rokem

    Don't make too much noise on towns . UK"S and on