Video není dostupné.
Omlouváme se.
Nissan Navara D40 Clutch change
Vložit
- čas přidán 1. 01. 2022
- Nissan Navara clutch and flywheel replacement.
A no BS guide.
I hope this is to the point and helpful.
Drop something in the comments if there's another mechanical job you would like to see carried out, any make any model..
Man such a clean and thorough video! The shooting is great and in HD, I mean what else could I wish for?! I 'love' my Pathfinder and always try to do my repairs with care, this is spot on. THANK YOU!!
This will be the 3rd time ive done this. I tow a big double axle caravan roughly the same millage each year, I manage to get 50k miles out of each. Iam 3 miles short of 150K so i knew it was coming. This a brilliant step by step guide and done with a sense of humour. Thank you for taking the time to put this together, very much appreciated.
Brilliant best How to You Tube Mechanical description I’ve seen… for any car!
Thanks mate
Great vid! I may well be doing this myself at home in the future. It's not often you see someone going from a solid mass f/w back to a dual mass f/w. Here in Australia the dual mass is considered problematic and most guys swap them for single mass.
I had already bought the clutch and flywheel before I started, if I had known would have left the solid one in. Cheers for watching 👍🏻
Wow, thanks man, perfectly filmed and detailed, with all the valuable tips.. Starting to look around to do my R51 Pathfinder one :p Thanks!!
Excellente vidéo ! Merci
Loved this!!
Very concise and helpful. Great Video!
Hi great video so it can be done on axel stands and on my back I’ve got this to come😢
Agradecido señor!
Muchas gracias
Hi Scott , great watch that, thanks for detail, please can you tell me is this the same details for a 2006 R51 Pathfinder manual with YDTTi diesel? also i see a breather pipe coming up behind the Airbox, i think this is for the front Diff? where are the breather ends for the Man gearbox and Transfer likely to be found? Thanks
Thank you, yes exactly the same, I honestly cannot remember seeing the breathers on the gearbox and transfer and I’ve done a few, I think there only on the diffs, box and transfer probably just a small breather on the tops
great...How Many time does this work need ?
Great video mate, really enjoyed it. I have a quick question. I have a 2014 D40. It's hard to shift down gears when cold but ok when warm. Also I get a little crunch when changing from 2nd to 3rd. Is this signs the clutch is on the way out ?
Thanks.
My shiftnob doesn’t go down to put the reverse….any tips?? Thanks a lot
Hi, I am struggling to find these dual mass flywheel bolts. Could you share the link of where you got them from? Thank you
www.ebay.co.uk/itm/335311153104?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=yi1ojZncSxy&sssrc=4429486&ssuid=jIrj_TmlSVq&var=&widget_ver=artemis&media=COPY
Thank you very much Scotty, my Navara is same as your shape, but 2014. I still it should be the same fitting even as these bolts are only listed up to the 2012 model? It is still a 2.5 diesel.
@@GregRepairs hi should be the same, send them your chassis/reg number to confirm
@@Scotty66thank you for your replies, it's a big help for me.
Stay warm mate😅
Hi Scott, thanks for the helpful knowledge you've presented in the video, unfortunately i failed to retain all of it and snapped my timing sensor off😥😂. Spoke with Nissian and they said it looks like the Crankshaft sensor. Is this the same sensor? Any chance you could advise on where to by a new sensor from? Kindest regards
www.ebay.co.uk/itm/272714081113?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=d4_KYMKfRna&sssrc=4429486&ssuid=jIrj_TmlSVq&var=&widget_ver=artemis&media=COPY
Thank you very much 👍
هل القابض للباترول يركب على نافارا ؟
Burned out the new clutch while burning rubber!😂
مرحبا سكوتي اعاني من صوت مزعج في سيارتي نافارا d40 وعند الضغط على دواسة الكلتش يختفي الصوت😅
Either the flywheel or the gearbox has a problem
Great video. Well explained... quick other question. Mine is going into 4 by 4 but not 4 lo... the clock spring was broken and I'm about to replace that. Not sure if the steering direction feeds into the 4 lo selection? Thanks
Hi, more likely to be one of the switches in the bottom of the gearbox, they govern the hi/lo switching, they get water in them, search eBay for d40 gearbox switches, change all 3 ( I think there’s 2 or 3) later boxes are on the top, change gear oil at the same time
@@Scotty66 thank you and thanks for the fast reply
@@Scotty66 Hay Anthony. Thanks again for the video. It helped a lot. I just needed to change my clutch thrust bearing (interestingly the old one was a non nissan part). The whole job was a mission because I had the car on trstles and my cross member was also wedged in place. I learnt a little trick which may be useful. Because I only needed to push the gearbox backwards (keeping it in the tunnel / reduced chance of it falling) so I fastened two ratchet straps across the chassis under the box (like a catch net) in case it fell (that things looks like it weighs more than 100kg)... anyway. Thanks again
Also if you hadn't mentioned that sensor I would have broken mine :)
Where you get the bodykit
Very helpful I’ve got a d40 do where are you based if I wanted you to do my clutch?
Thank you, up in the hills of Northumberland NE461SZ 07799642846
Solid video. Where are you based?
NE461SZ
Hi Scotty..Iam planning to change my clutch on my Nissan Navara 2015 facelift.. do i need to use a self adjusting tool for the clutch replacement.???
Great video by the way...
many thanks john
Cheers
Self adjusting tool for ?
iam not to sure if the clutch is self adjusting and needs the self-adjusting clutch mounting tool for this year 2015
Should be just the same as the one in the video
@@Scotty66 yeah i don't think i will need it but just thought i would ask before i get it striped out ...thanks again john
What parts number or name of clutch lining?
www.ebay.co.uk/itm/171328474655?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=I7KZY1QuS96&sssrc=4429486&ssuid=jIrj_TmlSVq&var=&widget_ver=artemis&media=COPY
Taiming
Some of the Australian models are fucked. You need to literally drag the gearbox out and then you need to push up the body before you try to put it back in. Also you should grind a point and extra schampher on the splines to make it not a bitch to get it started.