Adam Savage's Aluminum Foil Ball Cut In Half! (Ft. Waterjet Channel)
Vložit
- čas přidán 24. 06. 2022
- In March 2022, Adam created a shiny solid sphere of aluminum using just a roll of standard foil wrap -- the so-called tin foil ball challenge ( • Adam Savage Takes the ... ). Curious what the inside of the final ball looked like, Adam tried -- and failed -- to cut it in half himself. Tested viewers suggested we call in the experts at @WaterjetChannel to help instead, and so we did! Here's the interior of the foil ball, per our new friends at Waterjet Channel! (Thank you, guys!)
Subscribe to the Waterjet Channel: / waterjetchannel
Watch the Waterjet Channel cut a CRT TV in half, per Adam's request: • We Cut Adam Savage’s F...
Adam Savage Takes the Aluminum Foil Ball Challenge: • Adam Savage Takes the ...
Join this channel to support Tested and get access to perks:
/ @tested
Tested Ts, stickers, mugs and more: tested-store.com
Subscribe for more videos (and click the bell for notifications): czcams.com/users/subscription_c...
Twitter: / testedcom
Facebook: / testedcom
Instagram: / testedcom
Discord: / discord
Amazon Storefront: www.amazon.com/shop/adamsavage...
Savage Industries T-shirts: cottonbureau.com/stores/savag...
Tested is:
Adam Savage / donttrythis
Norman Chan / nchan
Joey Fameli www.joeyfameli.com
Ryan Kiser / ryan.kiser
Josh Self / puppetflesh
Kristen Lomasney / krystynlo
Jen Schachter www.jenschachter.com
Kishore Hari / sciencequiche
Sean Charlesworth / cworthdynamics
Kayte Sabicer / kaytesabicer
Bill Doran / chinbeard
Ariel Waldman / arielwaldman
Darrell Maloney / brokennerd
Intro bumper by Abe Dieckman
Thanks for watching!
#adamsavage #tinfoilball - Věda a technologie
Subscribe to the Waterjet Channel: czcams.com/users/WaterjetChannel
Watch the Waterjet Channel cut a CRT TV in half, per Adam's request: czcams.com/video/MVuDkvKqLEk/video.html
Adam Savage Takes the Aluminum Foil Ball Challenge: czcams.com/video/q_YZX1SgZ5Y/video.html
Adam you've always been the mad scientist we need, you're one of the reasons why I love physics
I've always thought that Adam would have found popularity even if myth busters never happened. I wonder if he would have been one of those early CZcams hobbiest creators. I was so happy to see Adam take so well to CZcams.
It's always fun watching for the "oooooh i could make a box for this" moment.
As a science obsessed autistic kid growing up watching Mythbusters you were the biggest inspiration for me man, you were always the one vocalizing exactly how excited I was for the same things an it really helped seeing an adult get so giddy about interesting science facts so thank you very much!
It is garnet that's used as the abrasive Adam
Such an honor to participate in this project!
PS hilarious you already knew what it would look like. A true expert
If you could choose anything from museum of novelties in which adam resides, what would you like to divide cleanly in half
Now that's the voice of experience, right?
"based on my previous 10,000 hours, I think I know how this will turn out..."
I don't always look in the comments, but when I do, I find 'Waterjet Channel' in the comments of every video I seem to watch.
What happened to Dan?
@@repentandbelieveinJesusChrist3 Thank you sir for your kind words of encouragement. It was nice of you to take the time to reach out and share your faith with me. And if you ever find yourself weighed down by the burdens of the world, in need of comfort, reassurance, or just a caring friend, and if you ever question your actions or motives, or doubt the purity of your intensions, just know that you are never alone, and you are walking his chosen path. The loving guiding hand of Satan is always there for you, always watching over you, and always there with you. He sees all that you do, he knows what you've done, and he approves.
Me: “I can’t believe I watched a man hammer an aluminum ball for half an hour”
Also me: “ooh a follow up video!”
lol.same
@@aalihte3378 lol.same pt.2
It feels redundant saying this, but us too!
Same
Me just now
It’s crazy how a lot of us grew up learning from this man on mythbusters. He’s got a massive place in my heart
@koiun dwrru I think the problem is that those generally come in much shorter rolls, and while his current ball is a good size, I'd assume he wants to go even bigger.
Same
Yeah and we're all getting old now, too. I saw him take off his glasses to look up close at the cut sphere. Oh how relatable.
Former waterjet operator here. Most jets use garnet as their abrasive medium. It's fairly hard as far as semi-precious gems go, but it's also much more affordable than harder ones like diamond or sappire. Depending on the model of jet and it's use case, the abrasive can range from a fine sand to a powder like consistency (can't really remember the grit range off the top of my head). The particular jet I ran was made in the late 90s and had an outlet pressure around 40k psi; newer models run closer to 100k psi.
One I ran also used garnet and ours ran around 65,000 psi
I worked at a formed fiber facility that cut out those liners in your car trunks. They used dual fanuc robot cells, with intensifiers that pressurized the water to 70k psi. I dont remember them using any cutting media to cut that material
Referring to 4:55: Also you don't always need an abrasive medium for thin and soft materials. The water has the function to cut too.
Just coming to say that.
Steven Universe fans know Garnet goes hard.
"I'm gonna make a little display and send one of these halves back to you" This is why so many people love Adam Savage. He's so thankful for peoples help and generous enough to share his joy and ingenuity with them. I love the fact that there are loads of little pieces of Adams love and passion out there in the world just because he loves building things for himself and others, and always seems to want everyone he meets to have some kind of memento. It's so wholesome.
Doubt he did it though it's easy to say stuff
I like his experiments, but I can't help getting a sense of fakeness from him. He is a good actor
@@TheNaturalGamer1 who hurt you
@@jasonzecchin4539 more like, who hasn't?
For real! Corridor Digital just collaborated with Adam and he gave them each a souvenir from his shop.
Adam is the most interesting man in the world, he can talk about an aluminum foil ball and keep me focused on this ordinary kitchen item for 8 mins. Amazing, keep making awesome content like this Adam 👏 I love it!
I Totally agree the man is a national tresure this enthusiasm is infectious and has been one of my favorite presenters for decades, never stop what your doing adam!!!
Mhm I have aluminium foil in my kitchen but not a beautiful foil ball like that. I think it's a remarkably unusual item.
@@MrFixiit Correction..."international treasure."
Source: Australia checking in.
@@repentandbelieveinJesusChrist3 "I don't know why you always have to be judging me, because I only believe in science" - Esqueleto
Well said
Adam taking 2 solid seconds to calculate 200 x 1 is my vibe
To polish that I’d strongly recommend treating it like a sample prep for microscopy. Vacuum pot in epoxy and then sand and polish. The epoxy will stabilize the foil and hold it so that it can be polished. Bonus is that if you build the epoxy containment correctly you end up with a beautiful display.
Great idea, I just commented that the core would probably just gall really badly, considering the poor consolidation.
A dip in a mild acid might first be needed to clean out all the crevices.
Either that or cast it in resin and create some sort of interesting shape with the semi circle in it. (Paperweight? Bookshelf item? something like that with a specific shaped mold)
I'm using epoxy to put an unsealed bottle of Aunt Jemima syrup on display.
@@bronsontolliver9027 awesome. you have to imortalize it now that they have rebranded
Thank God. I haven't been able to sleep for the last 3 months. I just lay awake thinking about what the middle could've looked like. I can now return to my slumber.
Now I'm going to be tossing and turning 'til I see what they look like polished
you was gon be sleepin like a dragon
Just an engineering tip I remembered about when you were fitting the two halves back together, if you have any kind of component failure (e.g. fatigue) it's very important to avoid fitting the two broken halves back together or even touching the failure interfaces. The reason is that it can damage the failure interface and that kind of evidence contamination makes professional investigations more difficult. Not that it really matters in this context (it was cut in half for fun) but it's worth being aware of.
shut up
This is how I wish all CZcams videos were. The way they used to be. Funny, informative, and within a reasonable time without a bunch of fluff. Thank you Adam!
Garnet is the usual abrasive in waterjets. A valve opens and the water stream basically pulls the abrasive in via venturi effect. At least in the waterjet we use at work. And in a LOT of cases the water itself can do a huge amount of damage on it's own. Basically all plastics/rubber, etc, and even thinner gauge metals can still be cut with just water. Which we do to save money since garnet for us is currently around 55 cents a pound, so long cuts in thick steel can cost hundreds of dollars in abrasive.
Thanks for sharing this. I entered the video thinking water cutting was just water at pressure. And left wandering how effective plain water actually would be after learning it was the work of abrasives I had been seeing up to now.
Can the abrasive be recollected and reused?
@@NuggetHorse The tricky part about reusing it is that you'll also get all the material that you removed. So suddenly it'll be garnet+whatever metal you might've cut last. I guess that isn't ideal.
I know of a company that does concrete cutting with diamond powder.
@@TinkerWorX get in Nile Red to add a drop of something and it'd be separated.
The water does do a good bit of cutting. I run a waterjet myself and can cut through a baseball bat with just pure water. It's just much slower. The particulate added to the water stream is usually powdered garnet.
How much slower is it?
Yup, WaterJet Channel has even done a few cuts in the past where they used water only because they didn't want to get tons of garnet inside whatever they were cutting. Liquids and gases at high speed are very powerful!
@@mainman879 I was about to ask the WJC. I wondered about iron or other harder metals, then I thought bout galvanic corrosion. I suppose with garnets, capture and reycling matters :) But at 7.5 Mohs, it certainly sounds hard enough to get the job done.
A wooden bat or aluminium?
@@healingenso7923 at least with the water jet I used to run you couldn't reuse the garnet it's not even remotely cost effective. Typically for nice cuts the nozzle is very small and clogs easily if the particle size isn't right. It is, however classed as non-hazardous waste and it's essentially just sand when it's spent.
Love how he and the Water Jet guys worked together on this…and then how he’s going to thank them. Awesome stuff.
Props to you Adam for still having all of your fingers for this long!! 👏 👏 truly shows how seriously you've taken your safety throughout the years.
Call me crazy, but if I ever got a chance to hang out with any celebrity, it would be Adam Savage bar none. The amount of knowledge he has about what seems like everything yet still being so friendly and wholesome makes him one of the best influences and best humans to ever exist...
I hope he never stops.
Yes! He has been at the very top of my list for over a decade. Literally the most interesting and fun human I have ever seen.
Adam's enthusiasm for his craft really is infectious and a joy to watch.
it would be interesting to see if you could hammer the relatively less dense center, and make a solid aluminum bowl
They sell those at walmart.
@perfect girl just a crap comment, ignore "perfect girl"
Correction, report "perfect girl"
I wouldn't use that bowl for food.
@@xagain3106 could use it for some chips to feed the robo dog ...
Love this. Adam Savage is an absolute legend, and despite all the success of the waterjet channel, I can't imagine their excitement of getting to work with you.
The thing I keep thinking of is how, despite full of air, it sticks together as a solid metal. Is it the pressure from the hammering that almost soldered the layers? That bond is impressive. Consider it stood a water jet at extreme high pressure and not a single foil separated from the other. Awesome.
When two metals are being deformed and now oxides are formed, they weld together via diffusion. This is actually a problem in aerospace applications. There is also a really cool engineering application for this which is called explosive welding, which can be used to weld material together that would not be weldable in any other way. Heres a video on the process
czcams.com/video/u9_bqafUJfA/video.html
@@michaelmuller4849 Thank you very much for the reply. Never heard of that technique. Very impressive.
maybe multiple interlockings from almost all directions. ??
Coming from the Waterjet channel, can’t wait to see it once it’s polished!
So crazy to see you on here. My most recent purchase from you is out for delivery 😊
uh the fancy ring guy is here too
Ayy, my favorite ringmaker is here!!!
Why are Dan and Mitch no longer featured on the Waterjet channel?
Same, I thought he was going to polish it now.
I can't wait to see the inside polished!
just put there a Polish flag and it will be polished😊
@@adriangaus3485 Ha. Dad joke.
i'm glad you explained the 'feels like aluminum' i did materials testing for a few years at one point in my life. you can tell metals and plastics apart by look and feel very easily with enough experience. any engineer worth their salt can at least identify a handful of materials by look and feel alone.
Would've been such a prank if they sent you the demon core instead
Mmmm just a wittle prank 😊 it's just a wittle prank 😊
Turn off the light completely, point the dim light source to this thing, and it will look like the moon.
So that’s how they faked the moon landing
That's because the moon is made out of aluminum foil
Fun to see Adam having a ball.
hehehe nice
Well done!
One of my favorite things about Adam Savage is he hasn't lost the child in him. I love that he decides to make or do something not for any reason, but just because. For the joy of seeing what will happen.
Adam, thank you for everything you did on for science, you really showed me that no matter how old you get Science is fun. I learned a lot and I still enjoy display of science. It has been a while and drifted from here until this was on my feed. Now I am back I want to see what you have done the last 2 years.
Keep up the great work. And I was really wondering what did happen to that ball. It is amazing that you was contacted by Waterjet. I did question how the water cutter worked and you answered it I thought it was maybe sand or something in the water I was close in my guessing. I went to my first physics class in college and it was so much fun. I seen so many amazing things like the egg going into the bottle and not breaking. And the bowling ball pendulum I did know that energy was expended at each end of the of the swing. That was a lot of fun.
I wish I really could have focused enough to get into a science field. I would of had a much more fulfilling life.
Ahhh, a kindred spirit. Adam takes me straight back to my childhood, when I was so intensely curious about the world around me. The best part is that he’s capable of doing all these wild experiments, yet he does them with safety as his number one priority so we don’t need to panic about mom finding out.
Hi Adam. If you do attempt a second foil ball, may I suggest that you "pre-crinkle" the foil a bit before rendering it into the growing sphere. The last go-round you chose to wrap the sheet of foil around itself before compressing. It's the laminar interfaces between these layers that inhibited the compression into a more compact form. I would crinkle the sheet into a loose rope-like form, then work that rope in a radial-spiral motion around the center, compressing as you go. Good luck, and can't wait to see Aluminum Foil Ball v. 2.0!
+
@@mondo_burrito This shit is so cringe to me. Never understood people who feel the need to "defend" creators like Adam from the lightest constructive criticism possible, which is truly in the spirit of enjoying improvement for fun, and which Adam probably loves.
@@mondo_burrito depends what you're using it for, best high quality general use im gonna go with Husqvarna and STIHL lmao
Why crinkle? Simply melt the aluminum instead of using a hammer and you can form it into a sphere then polish it to a mirror finish.
@@mondo_burrito This was a pleasant and unexpected interaction
I hope we still get aluminum foil ball 2.0! This was such a joy to see created and sliced in two!
Learned recently that he had a CZcams channel and instantly subbed, I mean myth busters basically was my child hood. This is amazing to see ya still doing what ya love so much
You need to send this to the Hydraulic Press channel and see what they can do with all this aluminum
man no replies
Oh, no!
Turn it back into into a aluminum ingot lol
turn it back in a thin sheet of foil
* starts twerking *
As always, I love your enthusiasm!! I’ve been doing stuff like this for over twenty years but I always learn something new from you!
You've been making aluminum foil balls for no reason, only to destroy them, for twenty years? You need some new hobbies man
@@versebuchanan512 - No, no, no. He's been sending things to be cut in half by the Waterjet Channel for over twenty years. It hasn't all been aluminum foil balls.
You deserved the golden buzzer
@@versebuchanan512 I mean, you can go ahead and watch his AGT audition to see his hobbies
@@poopoogamer1232 agt is staged entertainment not an actual talent show
I was so happy to see this on my feed.
I always wondered what the inside looked like.
I would keep both halves in tact as a conversation starter on my desk.
Cutting it in half was legit the only thing I could think about during your whole process 😂… this is really amazing. ❤
seeing Adam looking down at those halves, and then saying "hello old friend!" made me nearly spit my coffee out hahahahaha
That is actually a pretty solid piece. Really has a knocking sound similar to, well, a block of alu
And completely agree on the "grippiness" of aluminium. From my dremel experience I know that iron/steel makes sparks and that's it, but alu is a huge mess and gets how. Cutting it dry throws dust everywhere and wet creates a nasty sludge.
we grind wax with traditional abrasive wheels... but we use candle wax as we grind it... makes the aluminum melt away like butter =D
😂! I recently subscribed to his channel, (last week or so) and the first vid I watched was him making the foil ball. And now I get to see the aftermath. Seeing Adam in his shop brings back memories of Myth busters! I'm sure Adam gets this all of time, but still! That show with the original crew was epic and irreplaceable!
I'm so happy this video popped up and I was able to see the reveal after watching the making of the aluminum sphere.
Bill Nye perked my interest in science as a child, Mythbusters furthered my intrigue into my early adulthood, and Adam STILL to this day draws me back into the excitement of it all. Even when it's as simple as slicing an aluminum ball in half. I don't mean to wax poetic, but thanks Adam. You're responsible for the inspiration of a generation.
Bill Nye and Beakman's World
Wish I could like this comment a bunch of times!
@@danealconall6527 i will like it once for you
@@connormessenger4756 Thank you!! ☺️
I have avidly watched ALL Mythbusters episodes. I still watch them streaming over the internet. Enthusiasm pours out of every part of Adam's explanations.
Both Jamie and Adam show this, but in different styles.....excellent.
Sometimes the brain acts like a pachinko machine, and they both understand this and work with it.
I was a mechanical engineer before retiring, but having the same curiosity and mindset has made me enjoy not only the show, but the continued enthusiasm.
Thank you guys!
Adam you make me smile everything that you literally light up over some small thing that sparks your thought process thank you !
Love these videos from Adam his energy cracks me up. I loved Myth busters it always blew my mind these guy's had the coolest job ever.
The sound of the two halves clanking together was so satisfying. Makes me think a Newton’s Cradle made out of smaller foil balls would sound incredible!
Yes please!
Years ago, I watched a video of someone making one out of thin sheets of gold. And when they finished it rattled since a small ball of gold had an air pocket it dislodged into and when they cut it open you could see it and it was amazing. You may still be able to find the video on CZcams
czcams.com/video/RklN-aloJDE/video.html
Cody's Lab!
it is people like your good self that help us move forward in science. Your enthusiasm is addictive!! Great video.
This is W A Y more interesting than I thought it was gonna be. That's fantastic, how much you can learn from such an innocuous thing as this lol
Honestly I love just... hearing the excitement in your voice in these videos. Its so like... full of wonder and excitement
So glad Adam came back to this one, I’ve been dying to see it cut in half. Looking forward to seeing it all polished up 👍
Hey! I just started rewatching Mythbusters because i found your channel, i'm so glad you're here! :) Mythbusters is one of my biggest childhood memory
I needed that... the last video without the cross section was such a blue ball situation!!! Lol love this stuff!!!
I will concur, trying to cut that ball in half was one of the dumbest things I have ever seen someone try to do. The only thing missing was "Hey hold my beer."
And blood - lots of blood.
We had on our tower ladder on my FD a unit called a Cobra Cutter, which is basically a portable water jet for cutting either holes in roofs with the unit on the basket or a shoulder held lance that can be used to cut into say a 30 yard dumpster. It uses a very fine aggregate propelled through the water to rip right through the material you are cutting
This is a truly amazing video for all of us with OCD, a fully finished task😅, that's how it's done. Thank you
I'm a Mortician and can Honestly Say that Adams forearm tat is One of the BEST ones/ideas yet!
Thank you so much for a conclusion to this project. I was really impressed with the method of the making of the foil ball, and really disappointed when we couldn't see inside.
The wait was worth it! The inside is cooler than the outside.
Thanks again,
A long time fan
Adam is like that crazy uncle that just gets more and more excited to show you random cool stuff.
For some reason I could not stop watching this lol. I’m not sure why a foil ball is so fascinating, but I’m sold.
I’m not sure what I enjoy more. Seeing the final result cut in half, or watching Adam see the final result for the first time.
You did a really good job on it - the other ones I've seen aren't as dense inside.
Is it weird that this has been one of the videos I’ve been most excited for?
I wish I could get half as excited about anything as he is about an aluminum ball. Being dead inside sucks.
I used to operate a water jet at a machine shop and we used Australian garnet. I'm sure there are other options out there, maybe even for certain types of material but that's what we used for aluminum, steel and all sorts of plastics. Thanks for the great video!
They did actually use garnet
Adam's such a positive individual. Love watching his stuff!
Now you just need to make it into a demon core lamp that glows blue when you turn it on
You sir, are living proof of something my Friends have always said...
Growing OLD is Mandatory...
Growing UP is Optional...
😄😁😆😅😂🤣
So glad you worked with those gentlemen!
I was discussing the problem you had with cutting a foil ball in half with my wife just a few days ago! It was a problem that I had been thinking about since it occurred. Came to the same conclusion that using a water cutter would be best and then this video comes out today! Overjoyed to see that it worked and the results are fascinating 😁
What fun! I can't wait to see the finished half and the next aluminum ball.
I love your enthusiasm for learning. I swear there is nothing better than being an adult with a 4 year old's curiosity, most of the time.
Had to click on your link. To get to this one. I knew there was going to be a part 2. So very cool😊
If there is a steel foil and I'm sure there is copper and brass foil I'd love to see you make all of those versions for the ball using same technique and cutting them and seeing the comparisons in how it comes out. Maybe even do a pressure stress test on each half of different material to see if they behave different.
I know there actually is for steel. Its used in industrial processes that requre heat resistant foil for temperatures over the melting point of aluminium. But one need to be careful, as ths stuff is pretty much razor sharp.
I think Adam may know where he can obtain some really thin lead foil. 🙂
I know that copper foil is an actual product, but rolls are beyond me. The largest I've seen are maybe 1 ft by 1 ft squares, and those I think were adhesive backed. You might have to go to a specialty metal supplier to get rolls.
@@absalomdraconis Nah here in UK at least you can buy rolls of brass and copper foil easy over eBay from UK suppliers.
just remember, that there (probably) is not any "TIN foil" as he constantly calls this aluminum foi.l (on second thought there almost certainly IS actual tin foil, but THIS IS NOT THAT)
His hair has been crazy my whole life haha I love that he can keep your interest front and center for so long!
Water jets are awesome! For the band saw, I'd have probably cut a cube of wood in half, then carved out a hemisphere in each half; place the ball in the middle then glue the wood back together.
Cut the cube with the bandsaw.
The moment I heard the sound of the two halves striking each other I thought of you cosplaying as the man from Monty Python and the Holy Grail following people around with his coconuts.
Glad I wasn't the only one 😂
Finally! How many others have been waiting for this? After watching Adam fail to cut it in half so many times and giving up I’ve been waiting for the update lol
Yes, it took us a while. Definitely on us and not Waterjet Channel!
@@tested I honestly expected it to look more like just warped aluminum but it looks pretty cool like if you sliced a meteorite in half this is what I would imagine.
Cool update, I'm extremely fascinated by this simple experiment, thank you!
I've been waiting so long to see what the inside would look like! 👏👏👏💃💃
You can see how the density changed the angle and path the jet took inside of the ball. So cool!
I'm sitting there watching Adam make this foil ball thinking "dude is off his rocker", then I realize... I am WATCHING Adam making a foil ball... Even worse, I had to see what was inside lol
I saw the first video at 2am and was too tired to find the second part. Thank the internet gods for bringing it to me on my feed
So much more dense and packed than I ever would’ve thought. I had a picture in my head already. I was so off. Ha! Thanks for the fun.
I use to watch you all the time in myth busters, I didn't know you had a CZcams channel!!!!
Its really intresting to see the core of this thing. the center looks like it captured tiny pockets of air, it kind of reminds me of what a meteorite that has been cut in half looks like. The meteorite is just fused tiny chunks of metal all formed togeather. i wonder if once you get on a large scale if the air pockets exist on large nearly moon sized asteroids that have enough gravitational force to give it a circular shape.
Of course there wouldnt be air in space but maybe some other gas from the friction of manys tons of gravitational force. Possibly including air, if an asteroid contained water. okay im ranting but, cool video
Your videos bring me consistent joy. Thanks!
I’m extremely pleased that I thought of the water jet cutter before he said it was suggested by other people and ultimately used that method.
*polished and lightly etched or vice versa (or the voids enhanced with a very thin acrylic pour media used for custom made table tops) and then displayed would be amazing...would also be an reason or opportunity for another themed one day build...not that you ever need an excuse for one of those*
after you made your attempt to cut it yourself, I started to see the Death Star. you had like the equatorial trench going on there. I thought how cool would it be to turn that into a Death Star. just rough it up a little bit, make an indentation for the laser dish. carve out that trench a bit more. and there you would have it. A misshapened, very rough looking and crudely constructed homemade Death Star. what a beautiful thing it would be.
I'm inspired by your efforts. I may construct my own aluminum foil ball Death Star. maybe Death Star 2......made out of tin foil!
Ho wow ! Just wow ! I didn’t think you would ever get that cut in half. Such a straight cut as well. Cool.
Awesome! Keep up the work and I'll be watching!
This dude makes me appreciate science like no other ever since I was a teen, amazing human being!
MythBusters was absolutely the most memorable part of my childhood, and I love to see that Adam is still making this amazing content!
Almost 2 am and I am as mesmerized by Adam with a aluminum ball as I am looking for OE on a monarch belly sample under a microscope. Adam can make anything interesting!
Your boundless enthusiasm is so entertaining! 👌😁👍
It is surprising how solid it sounds. Polishing would be such an interesting challenge because of the porosity.
That's cool. It looks like a rock!
Thanks Adam for explaining the water jet.. i always thought its just a high pressure spray.. good to know😊
Getting some demon core vibes every time he brings the two halves back together.