I had the Ti-30 for a couple months now and I followed a couple of your mods for throttle and headlights. How do I get the throttle to be more linear? It goes from cruise to trying to kill me with nothing in between.
I believe that is a drawback of the squarewave stock controllers. Once I do some testing with them. I’ll be swapping them out with some sinewave controllers I ordered. Hopefully that will be an improvement. Will do a video on that, probably a month out from now.
Yes, you can replace the battery. CR2032. Pry the silver sides off the remote, then you’ll see a seam down the middle where it separates into two halves.
I have the same scooter and I tried this because I thought it would fix the issue I had where I keeps turning off even tho it’s fully charged but no it’s keeps turning off every time I turn it on idk what to do.
Measure the battery directly on one of the battery plugs. If it is fully charged it should be around 67v dc. If it is but when you turn on the display it turns on but then goes off by itself, it’s either the controllers or display itself. I would recommend getting the Yunli controllers with the Yunli DS20 throttle.
I believe you mean the phase wires (three thicker wires, yellow green and blue from each motor and controller). It depends on what controllers are installed. For the Ti-30 with the stock JP controllers, yellow goes to yellow, but blue goes to green and green goes to blue. For the Yunli controllers, it shouldn’t matter because the Yunli controllers have a learn function. I have videos on the controller install for both types. Which controllers do you have?
Bonjours, j ai une trottinette électrique 5600w avec deux contrôleur Yunli 60v 45+1 tout neuf et la trottinette électrique ne s allumer pas et je comprends pas pourquoi, si vous avez un schéma de branchement à me présenter je suis preneur
I had the Ti-30 for a couple months now and I followed a couple of your mods for throttle and headlights. How do I get the throttle to be more linear? It goes from cruise to trying to kill me with nothing in between.
I believe that is a drawback of the squarewave stock controllers. Once I do some testing with them. I’ll be swapping them out with some sinewave controllers I ordered. Hopefully that will be an improvement. Will do a video on that, probably a month out from now.
@@Desert-Ecruising I will be looking forward to it!
anyway to charge or change the batteries for the scooter remote key???
Yes, you can replace the battery. CR2032. Pry the silver sides off the remote, then you’ll see a seam down the middle where it separates into two halves.
I have the same scooter and I tried this because I thought it would fix the issue I had where I keeps turning off even tho it’s fully charged but no it’s keeps turning off every time I turn it on idk what to do.
Measure the battery directly on one of the battery plugs. If it is fully charged it should be around 67v dc. If it is but when you turn on the display it turns on but then goes off by itself, it’s either the controllers or display itself. I would recommend getting the Yunli controllers with the Yunli DS20 throttle.
The motor wires The ones that connect to the control box I believe there's like six of them do they need to be the same color on each side
I believe you mean the phase wires (three thicker wires, yellow green and blue from each motor and controller). It depends on what controllers are installed. For the Ti-30 with the stock JP controllers, yellow goes to yellow, but blue goes to green and green goes to blue. For the Yunli controllers, it shouldn’t matter because the Yunli controllers have a learn function. I have videos on the controller install for both types. Which controllers do you have?
Bonjours, j ai une trottinette électrique 5600w avec deux contrôleur Yunli 60v 45+1 tout neuf et la trottinette électrique ne s allumer pas et je comprends pas pourquoi, si vous avez un schéma de branchement à me présenter je suis preneur
Vous croyez que ça viens du boîtier d alarme
@@SEN-rp7mg What throttle/display are you using? Also, watch this: czcams.com/video/nVbxYaVWYAk/video.htmlsi=mPoNl07iT87VKCzN
It tried to shock me
Why haven't you been riding it
I want to finish modding it first and I have other scoots to ride.
Not working
If u need help, email me: maikemarx@gmail.com
I tired this